Maldives · Male
Remote Hands in Male
Remote hands in Male means Reboot Monkey engineers are dispatched to the customer's facility to carry out physical tasks on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party datacenter services operator working inside facilities that other companies own and run.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Male
1
agreement for every city
Request a quote for remote hands in Male
Tell Reboot Monkey the task and the facility, and receive a quote based on the customer and the size of the job.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Male
MVIXP Datacenter stands on H. Bonthi in Male. A customer with equipment in a Male facility uses remote hands when a physical action is needed at the rack and the customer instructs it: a reboot, a cable check, a component swap or a visual check. Reboot Monkey engineers are dispatched to the customer's facility to carry out the task. The customer decides what is done, and the engineer carries out the instruction at the rack.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters. For a remote hands request this means the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service from remote hands. Keeping the two apart makes the scope of a request clear before an engineer is dispatched.
Datacenter Facilities in Male
Data centres in Male, ordered by the number of networks present:
- MVIXP Datacenter (Maldives Internet Exchange), H. Bonthi, Hiyfasheyha Goalhi, 20057 Male': 2 networks
Our Remote Hands Services
Customers looking for on-site IT support in Male data centers can pair remote hands with the services below. Each is defined by the work it covers, so a request can be matched to the right one.
Hardware that leaves service passes through data center decommissioning and, where data must be destroyed, IT asset disposition. Hardware that stays in service can be watched by the NOC under hardware monitoring. A single project can use several of these: for example, a server migration followed by decommissioning of the retired hardware.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
Reboot Monkey is a vendor-neutral operator, and its engineers work on the customer's equipment as it is installed in the rack. Reboot Monkey does not host the customer's workloads; the customer's equipment stays in the customer's racks.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the customer knows in advance who the alternate is.
Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A cabling change at the rack and the circuit it connects to are therefore ordered and installed by one company. A fibre inspection scope and cleaning kit are available on request.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That is a global figure for field work, shown to describe Reboot Monkey's reach, not a count for Male.
Prices are quoted on request and depend on the customer and the size of the job.
How Reboot Monkey Works
These terms apply in every facility in Male where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Male?
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility in Male to carry them out at the rack. Work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service, and installing new hardware is rack and stack.
Do you provide on-site IT support in Male data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Male and work on the customer's equipment on site. Physical tasks are remote hands, technical work needing diagnostic judgement is smart hands, and moving equipment between racks, rooms or facilities is server migration. The Reboot Monkey NOC can also monitor the customer's servers and network equipment.
Do you work in every datacenter in Male?
Reboot Monkey engineers work in any facility in Male where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Male?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Male?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request a quote for remote hands in Male
Tell Reboot Monkey the task and the facility, and receive a quote based on the customer and the size of the job.