Map: Natural Earth
ITAD
ITAD in Netherlands: IT Asset Disposition
ITAD in Netherlands covers the end-of-life handling of IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process the hardware in a partner's processing facility or on the customer's site.
9
of our services in Netherlands
In depth
ITAD: 9 sections, open any to read more.
ITAD in Netherlands: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Reboot Monkey delivers it as a field service for organisations in Netherlands that retire IT hardware.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it does not own datacenters. ITAD is the service that closes the hardware lifecycle.
The processing is carried out by Reboot Monkey staff in one of two places: a partner's processing facility, or the customer's own site. The place of processing is the first point to settle in a request, because it decides where the customer's hardware is while the work is done.
ITAD starts once hardware has been retired. Decisions about what to retire and when stay with the customer. Reboot Monkey takes the hardware from the site, treats the storage media and routes equipment that can be used again to resale or buyback. The three questions below are operational, and each one changes what the job involves.
A request is scoped around three questions:
- Where the hardware is collected: the customer's site or the customer's data centre.
- How the storage media is treated: data wiping or physical destruction.
- Which equipment can be used again and goes to resale or buyback.
E-waste Rules in Netherlands
In Netherlands, electronic waste falls under the Regeling afgedankte elektrische en elektronische apparatuur of 2014. For a CTO, IT director or procurement manager planning a hardware retirement, it is the Dutch framework for the electronic waste that retired hardware can become, and it is worth reading before the first request is made.
Reboot Monkey's part in a job is operational, not legal advice. How the regulation applies to a given asset class, and what it requires of the customer as the owner of the equipment, is a question for the customer's own legal or environmental adviser. An ITAD job does not replace that reading.
What Reboot Monkey needs at the start is a clear description of the hardware. A request is easier to scope when the customer can state where the hardware stands, which equipment types are being retired, and which items might still be used again, because the resale or buyback of usable equipment is quoted case by case.
The asset list the customer hands over at collection is the natural reference for three later questions: which units were collected, which units had their storage media wiped or destroyed, and which units were sold or bought back.
Two points belong in the request itself. The first is the customer's preferred treatment of storage media, wiping or physical destruction, which Reboot Monkey can carry out on the customer's site. The second is whether the customer wants a quote for resale or buyback at all. Both are decisions the customer makes before collection is arranged, and both are easier to make with the asset list already in hand.
Personal Data on Retired Drives in Netherlands
In Netherlands, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Dutch Data Protection Authority (Autoriteit Persoonsgegevens).
For an IT director, the practical question is what happens to every drive between the moment it is retired and the moment the hardware is resold or processed. Storage media is the part of retired hardware that holds data, and it gets its own handling step within an ITAD job. Reboot Monkey offers two routes for that step: data wiping, and physical destruction.
The two routes differ in what remains afterwards. Data wiping leaves the drive intact and usable, while physical destruction ends its use. On the customer's site, storage media can be destroyed physically by shredding or degaussing.
Drives rarely travel alone. A retired server carries its drives with it, and equipment sent for resale or buyback therefore holds storage media that needs the same decision as equipment being retired outright.
These points are worth settling with Reboot Monkey before collection is arranged:
- Which devices hold personal data, and which hold none.
- Which drives are to be wiped and which are to be destroyed.
- Whether destruction is to take place on the customer's site.
How Collection and Destruction Work
Reboot Monkey staff carry out the physical work of an ITAD job, and the customer deals with one party for collection, transport and treatment, even when the processing takes place in a partner's processing facility. Collection and transport are separate steps: the hardware is first taken from the place it stands and then moved to where it is processed. When the customer's site is also the place of processing, as with shredding or degaussing there, the storage media that is destroyed on site is not part of the transport step.
Two features of the order matter when planning. The request comes first because the place of processing, the treatment of the media and the resale question all change what collection involves. The processing step is the one the customer's own decisions shape most, because it is where a drive is wiped, shredded or degaussed.
A job runs in the order below, from the first request to the routing of equipment that can be used again.
- Request: the customer states the site or data centre, the hardware to be retired, the treatment wanted for the storage media and whether any equipment may be offered for resale or buyback.
- Collection: Reboot Monkey collects the retired hardware at the customer's site or data centre.
- Transport: Reboot Monkey transports the hardware for processing.
- Processing: Reboot Monkey staff wipe the data or destroy the storage media at the place agreed in the request.
- Resale or buyback: equipment that can be used again is quoted case by case.
Datacenter Disposal in Netherlands
When a customer closes a data centre room, clears a cage or retires a set of racks, two Reboot Monkey services meet. Data center decommissioning is the removal and disposal of retired hardware. ITAD adds the treatment of the storage media, the collection and transport, and the resale or buyback of equipment that can be used again. In practice the two describe the same retirement from two sides: one takes the hardware out of the racks, the other handles what happens to each item afterwards.
The data centre itself belongs to someone else. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. For a disposal job, that means collection is planned around the operator's access rules, and the request should name the building so that those rules can be taken into account. Reboot Monkey engineers handle the retired hardware, while the power, cooling and building stay with the operator.
Not everything that leaves a rack is retired. Server migration moves equipment between racks, rooms or facilities, and rack and stack installs, mounts and cables new hardware. A data centre project in Netherlands can therefore give the existing hardware one of three outcomes:
- Stays: the equipment remains in its rack.
- Moves: server migration relocates it between racks, rooms or facilities.
- Retires: ITAD collects it and processes it, and only this outcome belongs to ITAD.
Hardware Opkopen in Netherlands
Hardware opkopen is the Dutch term for the purchase of used IT equipment. Within an ITAD job it takes the form of resale or buyback of the equipment that can be used again.
Resale or buyback is quoted case by case, which means each request is assessed on its own equipment and not against a fixed list. Prices are quoted on request and depend on the customer and the size of the job. The starting point for a quote is therefore the customer's own description of the equipment.
Equipment offered for resale or buyback still carries storage media, so the decision between data wiping and physical destruction applies to it as it does to everything else in the job. A customer can use the opkopen route for part of a hardware retirement and destruction for the rest, and a single request can contain servers that are offered for resale and drives that are destroyed on the customer's site.
An equipment list that supports a quote covers these points:
- The equipment types and how many units of each are being retired.
- The location where the equipment stands, whether a site or a data centre.
- The storage media inside each unit.
- Which items the customer would like to see offered for resale or buyback.
Why Reboot Monkey for ITAD in Netherlands
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For ITAD in Netherlands, engineers are dispatched to the customer's site or data centre to collect the retired hardware.
ITAD is one of the services Reboot Monkey delivers around a hardware lifecycle, which also includes rack and stack, server migration, data center decommissioning, remote hands, smart hands and hardware monitoring. A customer that retires hardware may need work in several of these areas. Three of them are defined here because they apply to equipment that stays in service:
The reasons to use Reboot Monkey for ITAD come down to scope and responsibility. Collection, transport and processing are carried out by Reboot Monkey staff, destruction on the customer's site is available, and the operator that installed or supported the hardware can also retire it.
A second, briefed Reboot Monkey engineer is named as backup for every customer site.
To start, send the request with the site, the hardware list and the treatment wanted for the storage media.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Netherlands.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in Netherlands?
IT asset disposition in Netherlands covers the collection and transport of a customer's retired hardware, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff carry out the processing in a partner's processing facility or on the customer's site. Data center decommissioning, server migration and rack and stack are separate services.
Where does Reboot Monkey process retired hardware in Netherlands?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Netherlands?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Netherlands?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Plan the retirement of your IT hardware in Netherlands
Send the site, the hardware list and the treatment wanted for the storage media. Reboot Monkey scopes the job and quotes it on request.