Skip to content

New Zealand · Auckland

Data Center Migration in Auckland

Reboot Monkey moves servers, storage and network equipment between racks, rooms or facilities in Auckland. Reboot Monkey can run the whole physical move or work alongside your own team, and a second briefed engineer is named as backup for every customer site.

In Data Center Migration

Data Center Migration

  • 7

    services detailed for Auckland

  • 1

    agreement for every city

Plan your Auckland migration

Send the source, the destination and the equipment list. Reboot Monkey scopes the physical move and quotes it on request.

In depth

Data Center Migration: 6 sections, open any to read more.

Data Center Migration in Auckland

DataCentre220 stands on Queen Street in Auckland. A migration in this city is a physical project: equipment leaves one rack, room or facility and arrives in another, and it has to be powered down, labelled, moved, remounted, cabled and brought back into service in a sequence the customer's applications can tolerate. Reboot Monkey is a third-party datacenter services operator. It does not own or run the buildings it works in. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Server migration, as Reboot Monkey defines it, means moving equipment between racks, rooms or facilities. That definition covers a move inside one hall, a move between two rooms of the same building and a move between two separate facilities. The scope of each job is written down before work starts, so that the customer, the facility operator and the Reboot Monkey engineers all work from the same plan on the day of the move.

  • Moves between racks, rooms or facilities
  • Scope, sequence and responsibilities agreed per project before the move

Datacenter Facilities in Auckland

Data centres in Auckland, ordered by the number of networks present:

  • DataCentre220 (Data Centre Limited), 220 Queen Street, Auckland Central, 1010: 97 networks; carriers Global Secure Layer, One New Zealand Ltd. and Vocus
  • Data Vault Auckland Data Center (Data Vault Limited), 162 Grafton Road, Auckland 1010: 62 networks
  • 2degrees Auckland - Albany, 7A Parkhead Place, Albany, Auckland 0632: 46 networks; carriers Falcore Australia Pty Ltd and Vocus
  • Mayoral Drive Exchange (MDR) (Spark New Zealand Trading Limited), 31 Airedale Street, Auckland 1010: 42 networks; carriers Global Secure Layer
  • Datacom - Orbit Data Centre (Auckland) (Datacom Data Centres Ltd), 6 Orbit Drive, Rosedale, Auckland 0632: 23 networks
  • Chorus Mount Eden Exchange (MOD) (Chorus New Zealand Limited), 2B Poronui St, Mt Eden, Auckland 1024: 22 networks
  • Sky Tower (Johnson Dick Associates / JDA), Level 47/48, Cnr Victoria and Federal Ave, Auckland 1010: 16 networks
  • Albany Data Centre (One New Zealand Ltd.), 3A William Pickering Drive, Rosedale, Auckland 0632: 13 networks; carriers One New Zealand Ltd.
  • CDC Auckland HV1 (CDC Data Centres), 32 - 34 Westpoint Drive, Hobsonville, Auckland 0618: 12 networks; carriers One New Zealand Ltd.
  • CDC Auckland SD1 (CDC Data Centres), 29 - 31 Highgate Parkway, Silverdale, Auckland 932: 12 networks; carriers One New Zealand Ltd.

Our Data Center Migration Services

A migration project in Auckland is built from the physical services Reboot Monkey already delivers inside customer racks. Each one has a defined meaning, and a project usually combines several of them.

The move itself is server migration. Reboot Monkey can run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a customer that wants its own administrators to handle the test phase can keep that step, and a customer that wants a single party responsible for the whole sequence can hand it over.

Rack and stack covers installing, mounting and cabling new hardware, which is the work at the receiving end when the destination racks need new equipment as well as relocated equipment. Smart hands is technical work that needs diagnostic judgement and configuration knowledge, which applies when a moved system does not come back as expected and someone on site has to look at the cause. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.

Network is part of the same project. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Hardware that is retired rather than moved is handled through data center decommissioning, which is the removal and disposal of retired hardware, and through IT asset disposition (ITAD) when data wiping, on-site shredding or degaussing, collection and transport, or resale and buyback are needed. Hardware monitoring, performed by the Reboot Monkey NOC on the customer's servers and network equipment, can follow the moved equipment into its new location.

  • Server migration: moving equipment between racks, rooms or facilities
  • Rack and stack: installing, mounting and cabling new hardware
  • Smart hands and remote hands: diagnostic work and physical tasks on the customer's instruction
  • Cross connects and carrier circuits ordered through the facility operator and the carriers present
  • Data center decommissioning and ITAD for hardware that is retired instead of moved

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company, and it does not own a datacenter. For a migration this means the work is organised around the customer's equipment and the customer's destination, not around a building Reboot Monkey needs to fill.

Every customer site has a second, briefed Reboot Monkey engineer named as backup. A move that depends on one person being available on one day carries a risk that the project plan should not accept, and the named backup removes that dependency before the work begins.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company moving equipment out of Auckland into another country, or consolidating equipment from several countries into one, the same operator can handle both ends of the move under one project.

Prices are quoted on request and depend on the customer and the size of the job. To start, send the source location, the destination, the equipment involved and the date the move has to be complete, and the project is scoped from those details.

  • Third-party operator working inside facilities that other companies own and run
  • A second, briefed engineer named as backup for every customer site
  • Responsibility for disconnecting, reconnecting and testing agreed per project

How Reboot Monkey Works

These terms apply in every facility in Auckland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Data Center Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does data center migration cover in Auckland?

Data center migration in Auckland covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Rack and stack, cross connects, decommissioning and ITAD can be added to the same job.

Do you work in every datacenter in Auckland?

Reboot Monkey engineers work in any facility in Auckland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Auckland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with data center migration in Auckland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.

Plan your Auckland migration

Send the source, the destination and the equipment list. Reboot Monkey scopes the physical move and quotes it on request.

Published:

Get a quote