Skip to content

New Zealand · Auckland

Rack and Stack in Auckland

Reboot Monkey installs, mounts and cables new hardware inside the customer's Auckland data centre. The work covers cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. Quotes are on request and depend on the customer and the size of the job.

In Rack and Stack

Rack and Stack

  • 7

    services detailed for Auckland

  • 1

    agreement for every city

Plan your Auckland installation

Send the equipment list and rack positions. Quotes are on request and depend on the customer and the size of the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Auckland

DataCentre220 stands on Queen Street in Auckland. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Rack and stack is the installation of new hardware: mounting it in the rack, cabling it and bringing it up. A typical Auckland job starts when a buyer has servers, switches or storage arriving and needs them physically in place without sending their own staff to the building. The request goes to Reboot Monkey with the equipment list, the target rack positions and the arrival details. An engineer is assigned to the customer's site, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so the job does not depend on one person being available. The building itself belongs to the facility operator. Access arrangements for deliveries and installation are therefore agreed within that framework before the work is scheduled.

Datacenter Facilities in Auckland

Data centres in Auckland, ordered by the number of networks present:

  • DataCentre220 (Data Centre Limited), 220 Queen Street, Auckland Central, 1010: 97 networks; carriers Global Secure Layer, One New Zealand Ltd. and Vocus
  • Data Vault Auckland Data Center (Data Vault Limited), 162 Grafton Road, Auckland 1010: 62 networks
  • 2degrees Auckland - Albany, 7A Parkhead Place, Albany, Auckland 0632: 46 networks; carriers Falcore Australia Pty Ltd and Vocus
  • Mayoral Drive Exchange (MDR) (Spark New Zealand Trading Limited), 31 Airedale Street, Auckland 1010: 42 networks; carriers Global Secure Layer
  • Datacom - Orbit Data Centre (Auckland) (Datacom Data Centres Ltd), 6 Orbit Drive, Rosedale, Auckland 0632: 23 networks
  • Chorus Mount Eden Exchange (MOD) (Chorus New Zealand Limited), 2B Poronui St, Mt Eden, Auckland 1024: 22 networks
  • Sky Tower (Johnson Dick Associates / JDA), Level 47/48, Cnr Victoria and Federal Ave, Auckland 1010: 16 networks
  • Albany Data Centre (One New Zealand Ltd.), 3A William Pickering Drive, Rosedale, Auckland 0632: 13 networks; carriers One New Zealand Ltd.
  • CDC Auckland HV1 (CDC Data Centres), 32 - 34 Westpoint Drive, Hobsonville, Auckland 0618: 12 networks; carriers One New Zealand Ltd.
  • CDC Auckland SD1 (CDC Data Centres), 29 - 31 Highgate Parkway, Silverdale, Auckland 932: 12 networks; carriers One New Zealand Ltd.

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. Each part has a defined outcome, so a buyer or procurement manager can compare the scope against an internal build checklist.

  • Mounting and cabling: new hardware is installed and mounted in the customer's rack, and the cabling is run and connected as the build plan specifies.
  • Labelling: cables and equipment are labelled, so that later changes, fault tracing and handovers to other staff start from a readable rack.
  • Power-on checks: once the hardware is installed and cabled, the engineer powers it on and checks that it starts, so the customer receives equipment that is physically ready for configuration.
  • Network connection: Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack.
  • Fibre checks: a fibre inspection scope and cleaning kit are available on request, for links that need inspection before they go live.

Why Reboot Monkey

Reboot Monkey works inside facilities that other companies own, which keeps the engagement independent of any one building. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a customer with equipment in Auckland and elsewhere can use one supplier for the physical work.

Rack and stack is often the first step of a longer lifecycle. The same engineers can later carry out remote hands tasks, smart hands work that needs diagnostic judgement, server migration between racks, rooms or facilities, and data center decommissioning when hardware is retired. Hardware monitoring of the customer's servers and network equipment is provided by the Reboot Monkey NOC, so the installation, the ongoing watch over the equipment and the later physical work sit with one operator.

For procurement, the commercial position is simple. Prices are quoted on request and depend on the customer and the size of the job. A quote is built from the equipment to be installed and the scope above, which lets a buyer compare like with like before work begins.

How Reboot Monkey Works

These terms apply in every facility in Auckland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Auckland?

Rack and stack in Auckland covers installing, mounting and cabling new hardware in the customer's rack, together with labelling and power-on checks. Quotes are on request, and the price depends on the customer and the size of the job.

Do you work in every datacenter in Auckland?

Reboot Monkey engineers work in any facility in Auckland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Auckland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Auckland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Auckland installation

Send the equipment list and rack positions. Quotes are on request and depend on the customer and the size of the job.

Published:

Get a quote