Skip to content

New Zealand · Auckland

Server Migration in Auckland

Server migration in Auckland means moving equipment between racks, rooms or facilities. Reboot Monkey engineers carry out the physical move inside data centres that other companies own and run, either as the whole project or alongside your own team, with the division of tasks agreed per project.

In Server Migration

Server Migration

  • 7

    services detailed for Auckland

  • 1

    agreement for every city

Plan your Auckland server migration

Send us the source and destination locations and the number of devices to be moved, and we will scope the project with you.

In depth

Server Migration: 6 sections, open any to read more.

Server Migration in Auckland

DataCentre220 stands on Queen Street in Auckland. For a CTO or IT director planning a move, the physical side of a migration is the part that cannot be done remotely: equipment has to be powered down, unracked, transported, re-racked, recabled and brought back up. Reboot Monkey is a third-party datacenter services operator. It does not own data centres and it is not a hosting company, so a migration is planned around the facilities and the hardware you already have, not around a platform we want you to adopt. A migration in Auckland can start from a rack in one room and end in another rack in the same building, or it can cross facilities. That affects scheduling, access approvals and the order in which work is done, and it is agreed with you before the project starts. Because Reboot Monkey also sells rack space, IP transit, leased IP addresses and network connectivity, the destination side of a move can be arranged in the same engagement. If new rack space or a new circuit is needed at the target facility, the same company orders the cross connects and carrier circuits from the facility operator and the carriers present, and engineers install and patch the cabling in your rack.

Datacenter Facilities in Auckland

Data centres in Auckland, ordered by the number of networks present:

  • DataCentre220 (Data Centre Limited), 220 Queen Street, Auckland Central, 1010: 97 networks; carriers Global Secure Layer, One New Zealand Ltd. and Vocus
  • Data Vault Auckland Data Center (Data Vault Limited), 162 Grafton Road, Auckland 1010: 62 networks
  • 2degrees Auckland - Albany, 7A Parkhead Place, Albany, Auckland 0632: 46 networks; carriers Falcore Australia Pty Ltd and Vocus
  • Mayoral Drive Exchange (MDR) (Spark New Zealand Trading Limited), 31 Airedale Street, Auckland 1010: 42 networks; carriers Global Secure Layer
  • Datacom - Orbit Data Centre (Auckland) (Datacom Data Centres Ltd), 6 Orbit Drive, Rosedale, Auckland 0632: 23 networks
  • Chorus Mount Eden Exchange (MOD) (Chorus New Zealand Limited), 2B Poronui St, Mt Eden, Auckland 1024: 22 networks
  • Sky Tower (Johnson Dick Associates / JDA), Level 47/48, Cnr Victoria and Federal Ave, Auckland 1010: 16 networks
  • Albany Data Centre (One New Zealand Ltd.), 3A William Pickering Drive, Rosedale, Auckland 0632: 13 networks; carriers One New Zealand Ltd.
  • CDC Auckland HV1 (CDC Data Centres), 32 - 34 Westpoint Drive, Hobsonville, Auckland 0618: 12 networks; carriers One New Zealand Ltd.
  • CDC Auckland SD1 (CDC Data Centres), 29 - 31 Highgate Parkway, Silverdale, Auckland 932: 12 networks; carriers One New Zealand Ltd.

Our Server Migration Services

Server migration, as Reboot Monkey defines it, is moving equipment between racks, rooms or facilities. The work is physical and is scoped with you per project. The following activities typically make up a move in Auckland.

  • Pre-move survey of the source rack and the destination rack, so each device has a confirmed position, power connection and cable path before the move day.
  • Labelling and documentation of existing cabling, so the equipment can be reconnected in the same logical order at the destination.
  • Power-down, unracking and careful handling of servers and network equipment, including packing for transport between facilities where the move crosses buildings.
  • Racking and cabling at the destination, installing, mounting and cabling the hardware in the new rack, which draws on the rack and stack service.
  • Cross connects and carrier circuits ordered from the facility operator and the carriers present, with cabling installed and patched in your rack by Reboot Monkey engineers.
  • Visual checks and cable checks after reconnection, with the customer's team or Reboot Monkey carrying out functional testing as agreed.

Why Reboot Monkey

Who does what on a migration is a commercial and technical decision, and Reboot Monkey leaves it with you. Reboot Monkey can run the whole physical move, or work alongside your own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a team that wants to keep application-level testing in house can do so while engineers handle the physical work.

Continuity on the day matters as much as the plan. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the move does not depend on a single person being available.

After the equipment is live in its new location, hardware monitoring is available as a separate service: the Reboot Monkey NOC monitors the customer's servers and network equipment. Remote hands and smart hands are also available for follow-up work, such as component swaps, reboots or configuration tasks that need diagnostic judgement.

Reboot Monkey's field engineers work in 190 countries and more than 400 locations, as of 2026. For organisations moving equipment between sites in different countries, this means one provider can plan the work at both ends of the move.

Prices are quoted on request and depend on the customer and the size of the job. To scope an Auckland migration, send the source and destination locations, the device count and any fixed dates the move must meet.

How Reboot Monkey Works

These terms apply in every facility in Auckland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does server migration cover in Auckland?

Server migration covers moving equipment between racks, rooms or facilities. Reboot Monkey engineers can run the whole physical move or work alongside your own team, and who disconnects, reconnects and tests the equipment is agreed per project. Work follows the facility operator's site rules, and a second, briefed engineer is named as backup for your site.

Do you work in every datacenter in Auckland?

Reboot Monkey engineers work in any facility in Auckland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Auckland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with server migration in Auckland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan your Auckland server migration

Send us the source and destination locations and the number of devices to be moved, and we will scope the project with you.

Published:

Get a quote