Photo: PlaneMad/Wikimedia · CC BY-SA 2.5 · cropped · source
India · Chennai
Rack and Stack in Chennai
Rack and stack in Chennai means installing, mounting and cabling new hardware in your racks inside a third-party data centre. Reboot Monkey engineers carry out the installation, cabling, labelling and power-on checks, and quotes are given on request.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Chennai
1
agreement for every city
Plan your Chennai install
Send the hardware list, rack position and cabling scope, and Reboot Monkey will quote the job.
In depth
Rack and Stack: 8 sections, open any to read more.
Rack and Stack in Chennai
Bharti Airtel Santhome stands on Bharti Towers in Chennai. Reboot Monkey does not own or run any data centre in the city. Rack and stack is the physical stage of a hardware deployment: servers, switches and storage arrive on site and have to be installed, mounted and cabled in the rack before anything can be configured. Reboot Monkey engineers do this work in the customer's rack, so a deployment in Chennai can move from delivered equipment to a powered, labelled installation without the customer's own staff attending. The work starts with the hardware and the rack position agreed in advance. Engineers mount each device, connect the cabling, label what they have installed and run power-on checks. You receive confirmation that the equipment is in place and has powered on, so your own team can pick up remotely for configuration. Where a job needs diagnostic judgement or configuration knowledge beyond installation, that is smart hands work, and the brief for the job says which of the two applies.
Datacenter Facilities in Chennai
Data centres in Chennai, ordered by the number of networks present:
- Bharti Airtel Santhome (Bharti Airtel Limited), Bharti Towers, 101 Santhome High Road, Chennai 600 028: 89 networks
- TATA Communications Chennai (TATA Communications Ltd), 4th floor, 2nd block, Chennai 600 002: 81 networks; carriers Netlayer Global Fabric and Reliance Jio
- Sify Tidel-DC- Chennai (Sify Technologies Limited), Sify Technologies Limited II Floor, TIDEL Park, No.4, Canal Bank Road, Taramani, Chennai 600113: 60 networks
- STTGDC CHN1, 4, Swami Sivananda Salai, Chennai 600002: 43 networks; carriers Netlayer Global Fabric and Reliance Jio
- Nxtra Data Chennai DC 1 (Nxtra Data Ltd), Plot No: F8, SIPCOT IT Park, Siruseri, Navallur, Kancheepuram Distt, Chennai 600103: 18 networks
- CtrlS Chennai DC2 (CtrlS Datacenters Ltd), 20, 3rd Main Rd, Old Ambattur, Sai Nagar, Ambattur Industrial Estate, Chennai 600058: 17 networks; carriers CtrlS Connect and Reliance Jio
- Netmagic Chennai (NTTCINS), 67, Mathiravedu, Velappanchavadi Poonamallee high road, Chennai 600077: 11 networks
- Reliance Chennai IDC (Reliance Communications Limited), Reliance Communications Infrastructure Limited, Reliance House, No-6, Haddows Road, Nungambakkam, Chennai, India - 600006: 11 networks
- CtrlS Chennai DC1 (CtrlS Datacenters Ltd), 20, 3rd Main Rd, Old Ambattur, Sai Nagar, Ambattur Industrial Estate, Chennai 600058: 8 networks
- Nxtra Data Chennai DC 2 (Nxtra Data Ltd), A32& A33,3rd cross street, First Cross Road, Siruseri, SIPCOT IT Park, Chennai 603103: 7 networks
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. Each element is part of the same visit, so the rack is left in a state your operations team can document and support.
- Mounting new servers, switches and storage in the customer's rack
- Cabling between devices and to the patch points the job requires
- Labelling of devices and cables so the installation can be traced later
- Power-on checks on each installed device
- Fibre inspection scope and cleaning kit available on request, for links that need the connectors checked before they go live
Why Reboot Monkey
Reboot Monkey sells the network for the rack as well as the labour to install it. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A hardware install and its connectivity can therefore be handled under one request instead of being split between several suppliers.
For every customer site, a second, briefed Reboot Monkey engineer is named as backup. If the first engineer is unavailable on the day of an install, the backup already knows the job, which keeps a scheduled deployment from stalling on a single person's availability.
Prices are quoted on request and depend on the customer and the size of the job. To get a quote for a Chennai install, send the hardware list, the rack position and the cabling you expect, and the quote is built from that scope.
How Reboot Monkey Works
These terms apply in every facility in Chennai where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Rack and Stack in Other Cities in India
If the same hardware refresh spans more than one site in the country, the work can be planned as one programme. A parallel install is available through [Rack and Stack in Mumbai](/en/india/mumbai/rack-and-stack/). As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a multi-site rollout does not need a separate supplier for each place.
Related Services
New hardware usually needs a home before it needs configuration. If you are still placing equipment, [Colocation in Chennai](/en/india/chennai/colocation/) covers rack space for the hardware that Reboot Monkey engineers will then install. Once the equipment is running, remote hands and smart hands cover reboots, cable checks, component swaps and technical work that needs diagnostic judgement, and hardware monitoring by the Reboot Monkey NOC watches the customer's servers and network equipment.
Frequently Asked Questions
What does rack and stack cover in Chennai?
Rack and stack in Chennai covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. A fibre inspection scope and cleaning kit are available on request. Quotes are given on request.
Do you work in every datacenter in Chennai?
Reboot Monkey engineers work in any facility in Chennai where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Chennai?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Chennai?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Chennai install
Send the hardware list, rack position and cabling scope, and Reboot Monkey will quote the job.