Skip to content

Palestine · Ramallah

Remote Hands in Ramallah

Remote Hands in Ramallah means Reboot Monkey engineers carry out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. We also provide on-site IT support in Ramallah data centers, so you do not need to send your own staff to the building.

Remote Hands

  • 8

    services detailed for Ramallah

  • 1

    agreement for every city

Request Remote Hands in Ramallah

Tell us what needs doing in your rack and we will quote the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Ramallah

MTIT Building 01 stands on Al-Bireh - Al-Balou '- Al-Moqadin Street in Ramallah. Equipment placed in a facility like this still needs hands when something goes wrong or something has to change, and that is the gap this service closes. You decide what is needed and instruct Reboot Monkey; an engineer carries out the physical task and reports back on what was done.

Reboot Monkey is a third-party datacenter services operator. It does not own or run data centres. It sells rack space, IP transit, leased IP addresses, network connectivity, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. In practice this means one party can supply the connectivity, the hardware and the people who touch it, instead of the buyer coordinating several suppliers for one rack.

Remote hands is defined here as physical tasks carried out on the customer's instruction. The instruction is yours: the engineer does not decide what to change. Where a job needs diagnostic judgement or configuration knowledge, that is smart hands, a separate service, and the distinction is worth settling before the request is raised so that the right engineer is briefed for the work.

Datacenter Facilities in Ramallah

Data centres in Ramallah, ordered by the number of networks present:

  • MTIT Building 01 (Ministry of Telecom and Information Technology), Al-Bireh - Al-Balou '- Al-Moqadin Street, Gemzo Suites, 00970 Ramallah: 16 networks
  • AL Zaytona Company For Communication Ltd, Alersal ST, Alersa Building 3rd FL, 90624 Ramallah: 1 network

Our Remote Hands Services

A remote hands request in Ramallah typically falls into one of a small number of task types. The tasks the service covers are:

  • Reboots: power-cycling a server or network device on your instruction when it stops responding.
  • Cable checks: tracing, reseating and confirming patch cables and connections in your rack.
  • Component swaps: replacing a failed part, such as a drive or a module, with a spare you have supplied.
  • Visual checks: reading and reporting the state of indicator lights, displays and labelling so you can judge the fault remotely.
  • Fibre inspection: a fibre inspection scope and cleaning kit are available on request when a link needs to be examined or cleaned.

Why Reboot Monkey

Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The same engineers who handle your remote hands requests understand how the circuits reach the rack, which shortens the path from a reported fault to a fix.

Continuity matters when a request cannot wait for one person. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a request does not depend on a single individual being available.

A request runs in a simple order. You raise the task and describe what you need done in the rack. A Reboot Monkey engineer attends the facility, works within the operator's access rules, carries out the instructed task, and reports what was done so you have a record of the work. Where the task turns out to need diagnostic judgement, the next step can move to smart hands, and larger jobs such as installing new hardware belong to rack and stack. The same engineers can also support server migration between racks, rooms or facilities.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Prices are quoted on request and depend on the customer and the size of the job.

How Reboot Monkey Works

These terms apply in every facility in Ramallah where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Ramallah?

Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task in your rack and works under the site rules of the facility operator. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack.

Do you provide on-site IT support in Ramallah data centers?

Yes. Reboot Monkey engineers attend the facility, carry out the physical work you instruct in your rack and report back on what was done. They work under the operator's site rules, since the operator owns and runs the building. A second, briefed engineer is named as backup for every customer site. Prices are quoted on request.

Do you work in every datacenter in Ramallah?

Reboot Monkey engineers work in any facility in Ramallah where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Ramallah?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Ramallah?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Ramallah

Tell us what needs doing in your rack and we will quote the job.

Published:

Get a quote