Skip to content

Palestine · Ramallah

Smart Hands in Ramallah

Smart hands is technical work inside the data center that needs diagnostic judgement and configuration knowledge, not only a reboot or a cable swap. Reboot Monkey dispatches field engineers to your equipment for on-site IT support in Ramallah data centers, under the facility operator's site rules.

Smart Hands

  • 8

    services detailed for Ramallah

  • 1

    agreement for every city

Request smart hands in Ramallah

Describe the site, the rack and the task, and Reboot Monkey will quote the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Ramallah

MTIT Building 01 stands on Al-Bireh - Al-Balou '- Al-Moqadin Street in Ramallah. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own a datacenter. For a CTO or IT director running equipment in a building they do not operate, that distinction decides who is accountable for a fault. Smart hands sits between two simpler services. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers the work where someone on site has to read a symptom, decide what to test next and change a configuration to match. When a link is down and the cause could be a patch, an optic or a port setting, a smart hands engineer works through those causes on the spot rather than waiting for instructions from a remote team at each step.

Datacenter Facilities in Ramallah

Data centres in Ramallah, ordered by the number of networks present:

  • MTIT Building 01 (Ministry of Telecom and Information Technology), Al-Bireh - Al-Balou '- Al-Moqadin Street, Gemzo Suites, 00970 Ramallah: 16 networks
  • AL Zaytona Company For Communication Ltd, Alersal ST, Alersa Building 3rd FL, 90624 Ramallah: 1 network

Our Smart Hands Services

A smart hands request starts with a description of the fault or the change: which rack, which device, what you observe and what the expected state is. Reboot Monkey assigns a field engineer, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not leave your site without cover. The engineer works at your equipment, applies the diagnostic steps the symptom calls for and reports what was found and what was changed. Where the work involves connectivity, Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. For fibre faults, a fibre inspection scope and cleaning kit are available on request. Smart hands in Ramallah typically covers the following kinds of work:

  • Fault diagnosis on servers and network equipment, including isolating a failing component or cable
  • Configuration changes made on site to match a change plan you provide
  • Cabling, patching and cross connect installation in your rack
  • Fibre inspection and cleaning when a link shows signal problems
  • Component replacement after diagnosis, with the removed part handled as you instruct
  • Follow-on services when a job grows: rack and stack for new hardware, server migration between racks, rooms or facilities, and data center decommissioning for retired equipment

Why Reboot Monkey

Reboot Monkey's field engineers work in 190 countries and more than 400 locations, as of 2026. For a buyer in Ramallah this means one operator can support equipment here and in other places under the same way of working, rather than a separate local contractor for each site. Reboot Monkey is vendor-neutral: engineers work on the equipment you own and do not push a hardware platform. The work is also separate from monitoring. If you want your servers and network equipment watched continuously, hardware monitoring is a distinct service run by the Reboot Monkey NOC, and a monitoring alert can lead directly to a smart hands request on site. Procurement teams should know how commercial terms work: prices are quoted on request and depend on the customer and the size of the job, so you describe the scope and receive a quote for that scope. The service terms for response, monitoring and coverage across facilities are set out in the service terms shown on this page. To start, send the site, the rack location and the task or symptom through the contact form, and Reboot Monkey will confirm the engineer assigned and the backup named for your site.

How Reboot Monkey Works

These terms apply in every facility in Ramallah where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Ramallah?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge: isolating faults on servers and network equipment, making configuration changes on site, patching cabling in your rack and replacing components after diagnosis. Simple physical tasks such as reboots, cable checks and visual checks fall under remote hands instead, and new installations fall under rack and stack.

Do you provide on-site IT support in Ramallah data centers?

Yes. Reboot Monkey field engineers carry out on-site IT support at your equipment in Ramallah data centers. You describe the site, rack and symptom or change, an engineer is assigned, and a second briefed engineer is named as backup for your site.

Do you work in every datacenter in Ramallah?

Reboot Monkey engineers work in any facility in Ramallah where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Ramallah?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Ramallah?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request smart hands in Ramallah

Describe the site, the rack and the task, and Reboot Monkey will quote the job.

Published:

Get a quote