Philippines · Makati
Rack and Stack in Makati
Rack and stack in Makati means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the cabling, labelling and power-on checks, and quotes are on request.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Makati
1
agreement for every city
Plan your Makati installation
Send your hardware list and rack position. Quotes are on request.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Makati
VITRO Makati 2 stands on VITRO Makati DC Building in Makati. A buyer who places new servers, switches or storage in a Makati data centre needs the hardware mounted, cabled and confirmed working before it carries production load, and that installation is the work Reboot Monkey takes on.
Rack and stack is the installation of new hardware: mounting it in the rack, cabling it and bringing it up. It is distinct from moving existing equipment between racks, rooms or facilities, which is server migration, and from removing retired hardware, which is data center decommissioning. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run.
For a customer in Makati this means one party can supply the equipment, the network and the hands that install it, while the facility operator keeps responsibility for the building. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Datacenter Facilities in Makati
Data centres in Makati, ordered by the number of networks present:
- VITRO Makati 2 (Vitro Inc.), VITRO Makati DC Building, 222 Nicanor Garcia St., Barangay Bel-Air, 1209: 137 networks; carriers RETN, RISE.ph and SG.GS
- STT Makati (Formerly MK2) (Globe Telecom), 2275 Chino Roces Avenue, 1231 Makati: 48 networks; carriers RISE.ph
- VITRO Makati 1 - Yuchengco Tower (Vitro Inc.), 6819 Ayala Ave., 34F Yuchengco Tower 2, RCBC Plaza, 1200 Makati: 43 networks; carriers RISE.ph and SG.GS
- Equinix MN3 - Manila (Equinix, Inc.), 5600 South Superhighway corner, Arellano St, Makati, 1235 Metro Manila, ZDRC TechnoHub Center Purificacion Street, Brgy 11: 4 networks
- SHIFT DATA - Yuchengco Tower (SHIFT DATA SERVICES INC), 6819 Ayala Ave., Yuchengco Tower RCBC Plaza, 1226 Makati
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. The job starts with your hardware list and the rack position it is destined for, and ends with equipment that is mounted, cabled, labelled and confirmed to power on. Quotes are on request, and prices depend on the customer and the size of the job.
The network side is handled in the same engagement. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. You do not need to coordinate the operator, the carrier and an installer as three separate parties.
- Mounting new servers, switches and storage in the rack
- Cabling and patching in the customer's rack
- Labelling of cables and equipment
- Power-on checks once the hardware is installed
- Cross connect and carrier circuit orders raised with the facility operator and carriers
- A fibre inspection scope and cleaning kit, available on request
Why Reboot Monkey
A rack and stack job is only as reliable as the person on site. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not stall an installation.
The same engineers can take on adjacent work when a project grows. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring brings your servers and network equipment under the Reboot Monkey NOC once they are installed. Each is a separate service, and a new installation can lead into any of them without a change of supplier.
On reach, as of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company deploying hardware in Makati alongside other sites, that means the same way of working can follow you to the next location.
How Reboot Monkey Works
These terms apply in every facility in Makati where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Makati?
Rack and stack covers installing, mounting and cabling new hardware, together with labelling and power-on checks. Reboot Monkey engineers install and patch the cabling in the customer's rack, and orders for cross connects and carrier circuits go to the facility operator and the carriers present. Quotes are on request and depend on the customer and the size of the job.
Do you work in every datacenter in Makati?
Reboot Monkey engineers work in any facility in Makati where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Makati?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Makati?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Makati installation
Send your hardware list and rack position. Quotes are on request.