Skip to content

Poland · Warsaw

Smart Hands in Warsaw

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, beyond a simple reboot or cable check. Reboot Monkey provides on-site IT support in Warsaw data centers, with engineers working at your rack on your instruction.

Smart Hands

  • 8

    services detailed for Warsaw

  • 1

    agreement for every city

Request Smart Hands in Warsaw

Tell us the facility, the equipment and the task, and Reboot Monkey will reply with how the work would be handled on site.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Warsaw

LIM Warsaw stands on Al. Jerozolimskie in Warsaw. For a team that runs equipment in the city but does not staff the room, the question is who can stand at the rack when a fault needs more than a power cycle. Smart hands answers that question. It covers technical work that needs diagnostic judgement and configuration knowledge: tracing why a link is down, working through a fault with your own engineers on a call, checking a configuration against what is physically cabled, or deciding which component to swap and confirming that the swap solved the problem. This differs from remote hands, which is physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. With smart hands the engineer contributes the diagnosis as well as the hands. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building, and it is not a hosting company. Your equipment stays yours and your instructions stay yours.

Datacenter Facilities in Warsaw

Data centres in Warsaw, ordered by the number of networks present:

  • LIM Warsaw (LIM CENTER Spółka z ograniczoną odpowiedzialnością), Al. Jerozolimskie 65/79, 00-697 Warsaw: 263 networks; carriers 1-IX EU, Arelion, FIORD, Inter.link, NetIX and others
  • Equinix WA1 - Warsaw, Centrum LIM (Equinix, Inc.), 65/79 al. Jerozolimskie, 00 697 Warsaw: 254 networks; carriers 1-IX EU, Arelion, Aristo Networks, Global Network Management, Global Secure Layer and others
  • ATMAN Data Center Warsaw-2 (WAW-2, Konstruktorska 5) (Atman Sp. z o.o.), ul. Konstruktorska 5, 02-673 Warsaw: 66 networks; carriers 1-IX EU and RETN
  • ATMAN Data Center Warsaw-1 (WAW-1, Grochowska 21A) (Atman Sp. z o.o.), Grochowska 21A, 03 Warsaw: 47 networks; carriers 1-IX EU and RETN
  • Equinix WA2 - Warsaw (Equinix, Inc.), 23 Poleczki, 02 822 Warsaw: 41 networks; carriers Aristo Networks, Global Secure Layer, NetIX, Orange Wholesale International - EVPL, RETN and others
  • Equinix WA3 - Warsaw (Equinix, Inc.), 217 al. Jerozolimskie, 02 222 Warsaw: 30 networks; carriers Aristo Networks, Global Secure Layer, Orange Wholesale International - EVPL and RETN
  • 1-DC EU (A-Systems Sp. z o.o.), AL. JEROZOLIMSKIE 65/79, 00-697 Warsaw: 24 networks; carriers 1-IX EU
  • DCENTER.PL - FT21, Al. Jerozolimskie 81, 02-001 Warsaw: 22 networks
  • Netia Warsaw (WARSC001) (Netia S.A.), ul. Piękna 15A (formerly ul. Piękna 11), 00-549 Warsaw: 19 networks; carriers RETN
  • Orange Polska / Warsaw św. Barbary 10 (Orange Polska Spolka Akcyjna), Św. Barbary 10, 00-686 Warsaw: 19 networks

Our Smart Hands Services

Smart hands work in Warsaw starts with a request that states the symptom, the rack and what you have already tried. A Reboot Monkey engineer is dispatched to the customer's facility, works through the fault on site and reports back what was found and what was changed. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the work does not depend on a single person being available. Reboot Monkey engineers carry out the following kinds of work in the rack.

  • Fault diagnosis on servers and network equipment, using physical access to check cabling, ports, indicators and components against your description of the problem.
  • Configuration support on site, following your instructions for the equipment in your rack.
  • Cabling and patching in your rack. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack.
  • Fibre checks on request: a fibre inspection scope and cleaning kit are available on request, which helps when a link fails on a connector rather than on a device.
  • Rack and stack, which is installing, mounting and cabling new hardware, and server migration, which is moving equipment between racks, rooms or facilities, when the job grows beyond a single fault.
  • Hardware monitoring, where the Reboot Monkey NOC monitors your servers and network equipment and an alert can lead directly to an engineer being sent to the rack.

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. For a CTO, an IT Director or a procurement manager in Warsaw, that means one supplier for the physical work around your equipment, in a building you choose. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a team that runs equipment in Warsaw and elsewhere can use the same supplier for both. Prices are quoted on request and depend on the customer and the size of the job, so a quote reflects your actual rack and the work you need done. When you request a quote, state the facility, the equipment and the kind of fault or task, and Reboot Monkey replies with how the work would be handled on site.

How Reboot Monkey Works

These terms apply in every facility in Warsaw where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Warsaw?

Smart hands covers technical work in your rack that needs diagnostic judgement and configuration knowledge. A Reboot Monkey engineer traces faults, checks cabling and ports, swaps components, installs and patches cabling, and reports what was found and changed. Simple physical tasks on your instruction, such as reboots and visual checks, fall under remote hands, which Reboot Monkey also provides.

Do you provide on-site IT support in Warsaw data centers?

Yes. A Reboot Monkey engineer is dispatched to your facility, works at your rack under the facility operator's site rules and reports the outcome back to you. A second, briefed Reboot Monkey engineer is named as backup for every customer site. Prices are quoted on request and depend on the customer and the size of the job.

Do you work in every datacenter in Warsaw?

Reboot Monkey engineers work in any facility in Warsaw where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Warsaw?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Warsaw?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Warsaw

Tell us the facility, the equipment and the task, and Reboot Monkey will reply with how the work would be handled on site.

Published:

Get a quote