Skip to content

Saint Martin · Marigot

Rack and Stack in Marigot

Rack and stack in Marigot is the installation, mounting and cabling of new hardware inside a data centre that another company owns and runs. Reboot Monkey engineers handle cabling, labelling and power-on checks for the customer's rack, and quotes are on request.

In Rack and Stack

Rack and Stack

  • 7

    services detailed for Marigot

  • 1

    agreement for every city

Request a quote for rack and stack in Marigot

Describe the hardware and the rack it is destined for, and Reboot Monkey will scope the work and quote it.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Marigot

Rack and stack is the installation, mounting and cabling of new hardware. In Marigot, Reboot Monkey carries it out inside a data centre that another company owns and runs. GCN Galisbay stands on ZA Galisbay in Marigot.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it does not own datacenters, so a rack and stack job here is delivery work on your equipment inside someone else's building.

A job begins with a description of the hardware to be installed and the rack it is destined for. Reboot Monkey scopes the work from that description. Quotes are on request and depend on the customer and the size of the job. Reboot Monkey engineers are dispatched to the customer's facility to carry out the installation.

New servers and network equipment are covered by the same job. Where equipment is instead being moved between racks, rooms or facilities, that is server migration, a separate service with its own scope. Tell Reboot Monkey at the quote stage which of the two applies, so the work is scoped correctly.

Datacenter Facilities in Marigot

Data centres in Marigot, ordered by the number of networks present:

  • GCN Galisbay (Global Caribbean Network), ZA Galisbay, 97150 Marigot: 4 networks

Our Rack and Stack Services

Once the hardware is on site, a rack and stack job in Marigot is made up of these parts of the work.

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility. A fibre inspection scope and cleaning kit are available on request.

Ongoing work after the installation is a separate matter. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. Hardware monitoring of the customer's servers and network equipment is done by the Reboot Monkey NOC.

  • Mounting: the new hardware is installed in the customer's rack.
  • Cabling: Reboot Monkey engineers install and patch the cabling in the customer's rack.
  • Labelling: part of the scope of rack and stack work.
  • Power-on checks: the installed hardware is powered on and checked.

Why Reboot Monkey

Reboot Monkey is a single counterpart for the space, the network and the hands in the rack. Rack and stack is one of 7 services it delivers, alongside remote hands, smart hands, server migration, data center decommissioning, IT asset disposition and hardware monitoring. Server migration moves equipment between racks, rooms or facilities, and data center decommissioning removes and disposes of retired hardware.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules, which is why power, cooling and building work stay with the operator and the engineers' scope is the hardware, the cabling and the network.

A second, briefed Reboot Monkey engineer is named as backup for every customer site.

Because Reboot Monkey orders the cross connects and carrier circuits itself, the customer deals with one party for the network, the installation and the support that follows. A rack and stack job therefore involves the customer, the facility operator and Reboot Monkey, with the carriers present in the facility joining when circuits are ordered.

How Reboot Monkey Works

These terms apply in every facility in Marigot where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Marigot?

Rack and stack in Marigot covers installing, mounting and cabling new hardware. The scope includes cabling, labelling and power-on checks, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Cross connects and carrier circuits are ordered from the facility operator and the carriers present. A fibre inspection scope and cleaning kit are available on request.

Do you work in every datacenter in Marigot?

Reboot Monkey engineers work in any facility in Marigot where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Marigot?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Marigot?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a quote for rack and stack in Marigot

Describe the hardware and the rack it is destined for, and Reboot Monkey will scope the work and quote it.

Published:

Get a quote