Map: Natural Earth
ITAD
ITAD in Singapore: IT Asset Disposition for Retired Hardware
ITAD in Singapore is the end-of-life handling of a business's IT hardware. Reboot Monkey collects retired equipment at the customer's site or data centre, transports it for processing, wipes or destroys the storage media, and quotes resale or buyback case by case for equipment that can be used again.
9
of our services in Singapore
In depth
ITAD: 8 sections, open any to read more.
ITAD in Singapore: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Singapore, Reboot Monkey delivers it as a physical service at the customer's own premises, which may be an office, a server room or a rack inside a data centre that another company owns and runs.
The work starts with collection. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. From that point the equipment is handled by Reboot Monkey staff, either in a partner's processing facility or on the customer's site. The processing location is settled when the job is scoped, and it follows from what the customer wants done with each group of devices.
ITAD is normally the closing step of a larger change: a server room is emptied, a platform is refreshed, or a deployment is moved out of a facility. Reboot Monkey also carries out the work around that moment, including server migration, which moves equipment between racks, rooms or facilities, and data center decommissioning, which removes and disposes of retired hardware. ITAD is the part of that sequence that deals with what happens to the devices, and to the data on them, once they have left service.
For a CTO, an IT director or a procurement manager, the decisions in an ITAD job are concrete. Which hardware leaves, and from where. Which storage media must be wiped and which destroyed. Whether any of the equipment can be used again and deserves a resale or buyback quote. Each of these decisions is made with the customer before any hardware is moved.
E-waste Rules in Singapore
In Singapore, electronic waste falls under the Resource Sustainability Act 2019. For a business that retires servers, switches, storage systems and other IT hardware, this is the legislation that sits behind the end of the hardware lifecycle, which makes the retirement of equipment something to plan as a defined job and not as an afterthought.
Reboot Monkey's part is the physical handling of that equipment. Its staff collect the hardware at the customer's site or data centre, transport it, and process it either in a partner's processing facility or on the customer's site. The customer's own legal and sustainability teams set the instruction for the job, and Reboot Monkey carries it out.
When the job is scoped, the retired equipment is separated into two streams. Hardware that can be used again goes to resale or buyback, which Reboot Monkey quotes case by case. Hardware that has reached the end of its useful life is processed as the customer instructs, and the storage media inside any device is dealt with by data wiping or physical destruction. Keeping the two streams apart at scoping means the customer knows, device group by device group, which route each one takes before collection takes place.
The same logic applies when retired hardware comes out of a data hall as part of a wider exit. Data center decommissioning removes and disposes of the retired hardware, and the ITAD route decides where each device group ends up afterwards: back in use through resale or buyback, or processed as end-of-life equipment. Because both are physical services delivered by Reboot Monkey engineers and staff, the customer deals with one provider for the removal and for the disposition that follows it.
Personal Data on Retired Drives in Singapore
In Singapore, personal data on retired drives falls under the Personal Data Protection Act of 2012 (No. 26 of 2012), overseen by the Personal Data Protection Commission. A retired drive is not an empty object. Until its contents are wiped or the device is physically destroyed, it still holds whatever the system stored on it, which can include personal data.
This makes the storage media the part of an ITAD job that needs a specific instruction. Reboot Monkey offers two routes for it. The first is data wiping, carried out by Reboot Monkey staff in a partner's processing facility or on the customer's site. The second is physical destruction on the customer's site, where storage media can be destroyed by shredding or degaussing.
The customer chooses the route for each group of devices before collection. Media that is destroyed on site does not leave the customer's premises as a working drive. Media that is wiped is processed after transport, so the collection and transport step forms part of the data-handling chain and is arranged as such with the customer.
Storage media sits inside many kinds of retired hardware, so the list handed to Reboot Monkey at scoping should identify every device that holds storage. Where the customer needs a different method for different drives, for example destruction on site for one group and wiping for another, the scope sets that out group by group and Reboot Monkey staff carry it out as written.
The customer remains the party that decides what happens to its data. Reboot Monkey's role is to carry out that decision on the hardware, on site or in a partner's processing facility, and to keep the route for each device group matched to the instruction it was given.
How Collection and Destruction Work
Collection is carried out at the customer's site or data centre. Reboot Monkey collects the retired hardware there and transports it for processing. The customer supplies the location, the hardware to be collected and the instruction for each device group, and Reboot Monkey engineers are dispatched to that location.
When the hardware sits in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Hardware that is transported is processed by Reboot Monkey staff in a partner's processing facility. Data wiping is carried out there, and equipment that can be used again is quoted for resale or buyback case by case. The resale or buyback quote is therefore tied to the specific equipment in the job and not to a general schedule.
Where the customer wants storage media to stay on the premises until it is destroyed, the work is done on the customer's site. Storage media can be destroyed physically there by shredding or degaussing, and Reboot Monkey staff carry out the destruction on site. The choice between the two locations is the customer's, and it is made at scoping.
ITAD concerns equipment that is leaving service. Support for equipment that stays in a rack is separate work: remote hands carries out physical tasks on the customer's instruction, smart hands covers technical work that needs diagnostic judgement and configuration knowledge, and hardware monitoring is performed by the Reboot Monkey NOC. Rack and stack installs, mounts and cables new hardware, which is the opposite end of the lifecycle from the retired equipment an ITAD job removes.
ITAD Process Step by Step
A request for ITAD in Singapore follows the same sequence from first contact to finished work. Each step has one purpose, and the customer's instruction at the scoping step determines everything that follows.
- Request: the customer contacts Reboot Monkey with the site or data centre, the hardware to be retired and the outcome wanted.
- Scoping: Reboot Monkey and the customer agree where processing takes place (a partner's processing facility or the customer's site), whether the storage media of each device group is wiped or physically destroyed, and which equipment is offered for resale or buyback.
- Collection and transport: the retired hardware is collected and transported for processing, except for storage media that the customer has chosen to have destroyed on site.
- Processing: Reboot Monkey staff carry out data wiping in the partner's processing facility, or shredding or degaussing on the customer's site, as the scope states.
- Resale or buyback: equipment that can be used again is quoted case by case, and the customer decides whether to proceed.
Why Reboot Monkey for ITAD in Singapore
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. ITAD is the service that closes the lifecycle of the hardware it helps customers install and run.
That range matters at the point of retirement. The same operator that provides rack and stack, server migration, remote hands, smart hands, hardware monitoring and data center decommissioning also collects, processes and quotes the resale of the retired equipment. A customer leaving a rack or a facility therefore briefs one provider on the removal and on what happens to each device group afterwards.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the job does not depend on a single person being available on the day of collection.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a customer with hardware to retire in several places, this means the same operator can be asked to carry out ITAD wherever the equipment sits, using the same scoping questions: where the hardware is, how its storage media is handled, and whether anything is offered for resale or buyback.
To start, send Reboot Monkey the location and a list of the hardware to be retired. Scope, processing location and any resale or buyback quote follow from that list, case by case.
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Singapore.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in Singapore?
IT asset disposition in Singapore covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Electronic waste falls under the Resource Sustainability Act 2019, and personal data on retired drives falls under the Personal Data Protection Act of 2012 (No. 26 of 2012).
Where does Reboot Monkey process retired hardware in Singapore?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Singapore?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Singapore?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Plan the retirement of your hardware
Send Reboot Monkey the location and the list of hardware to be retired, and the scope for collection, data wiping or destruction, and resale or buyback is set out case by case.