Map: Natural Earth
ITAD
ITAD in Spain: IT Asset Disposition by Reboot Monkey
ITAD in Spain is the end-of-life handling of a customer's IT hardware: Reboot Monkey collects the retired hardware at the customer's site or data centre, transports it for processing, wipes or destroys the storage media, and quotes resale or buyback of reusable equipment case by case.
9
of our services in Spain
In depth
ITAD: 7 sections, open any to read more.
ITAD in Spain: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again.
Hardware reaches that point in several ways: a server refresh, a migration to another platform, the closure of a server room or the end of a lease. In each case the customer holds equipment that is out of service, that may still hold data on its drives, and that has to leave the site in a controlled way. For an organisation in Spain, ITAD turns that situation into a defined job with a start, a handling route for the data and a destination for the equipment.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. ITAD is one of the services Reboot Monkey delivers on a customer's hardware, and it covers the end of that hardware's life.
A request moves through these steps. The customer describes the hardware to be retired and where it stands, either at its own site or in a data centre. Reboot Monkey collects the retired hardware at that location and transports it for processing. The storage media is then wiped or destroyed, and equipment that can be used again is considered for resale or buyback, which is quoted case by case. All of this is processed by Reboot Monkey staff, either in a partner's processing facility or on the customer's site.
Data center decommissioning, which covers removing and disposing of retired hardware, is a separate service from ITAD. ITAD is the part that deals with the data on the storage media and with the resale or buyback of reusable equipment. A request that involves both should say so from the start, so that each service is scoped against the hardware it applies to.
E-waste Rules in Spain
In Spain, electronic waste falls under the Real Decreto 110/2015, de 20 de febrero, sobre residuos de aparatos eléctricos y electrónicos. For an IT department, that decree is the national rule behind a practical question: what happens to a server, a switch or a storage array once it is taken out of service. Hardware that stops being used and is not kept becomes electronic waste, so the route it takes after it leaves the rack is a decision the organisation makes on purpose.
Reboot Monkey's part in that decision is the physical handling. It collects the retired hardware at the customer's site or data centre and transports it for processing.
A request for a quote is easiest to scope when it states the types of equipment, where each item stands, which items contain storage media and whether the customer wants destruction on its own site. Those details show which units are candidates for resale or buyback. Where it is unclear whether an item can be used again, the customer can raise that in the request together with the item's type and location.
The decree applies to the customer's own hardware, and reading it for a specific organisation is a task for the customer's legal or environmental advisers. Reboot Monkey carries out the physical work: collection, transport and processing of the hardware.
Deciding between reuse and disposal is a commercial question as much as a regulatory one. Equipment that can be used again can be offered for resale or buyback, and the offer is quoted case by case. Hardware that cannot be used again still carries storage media, and the handling route for that media is data wiping or physical destruction. Both outcomes start from the same collection at the customer's site or data centre.
Server migration is the service for moving equipment between racks, rooms or facilities. When a migration ends and the old servers have no further use, they become retired hardware, and ITAD takes over from that point: collection at the customer's site or data centre, then processing. The same applies to a refresh, where new hardware is installed through rack and stack and the replaced units move to ITAD.
Personal Data on Retired Drives in Spain
In Spain, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Agencia Española de Protección de Datos. A drive that has left production does not stop holding data: customer records, user accounts, logs and backups can remain on it until the media is wiped or destroyed. That makes the storage media the part of a retirement job that needs a deliberate handling route.
The ITAD service deals with the data on retired storage media by data wiping or by physical destruction. On the customer's site, storage media can be destroyed physically by shredding or degaussing, so the customer can choose to have destruction carried out where the hardware stands. Wiping and destruction are both processed by Reboot Monkey staff, either on the customer's site or in a partner's processing facility.
Wiping and destruction lead to different outcomes for the hardware. Wiping leaves the media physically intact, so it fits equipment that can be used again and is offered for resale or buyback. Physical destruction ends the use of the media itself. Which route suits which device is the customer's decision, based on what the device held and whether it is to be resold.
Deciding what the regulation requires for a given set of data is a task for the customer and its data protection advisers. Reboot Monkey carries out the physical handling of the drives and the storage media.
Storage media is easiest to track when the customer states, in the quote request, which devices contain drives and where they stand. Collection then takes place at the customer's site or data centre, and the hardware is transported for processing. If the customer wants destruction on its own site, that is stated at the start of the request, because it changes where the work takes place.
Personal data does not stop being personal data when equipment is declared surplus. Until the media has been wiped or destroyed, the drives remain a data protection matter for the customer, whether they sit in a rack, in a storeroom or in transit.
How Collection and Destruction Work
The work begins with a request that names the hardware, its location and the handling the customer wants for the storage media. Prices are quoted on request and depend on the customer and the size of the job. Resale or buyback of reusable equipment is quoted case by case, so each offer relates to the specific equipment concerned.
Collection takes place at the customer's site or data centre. Reboot Monkey engineers are dispatched to that location, collect the retired hardware and transport it for processing. A second, briefed Reboot Monkey engineer is named as backup for every customer site. In a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
A job follows one of these paths, depending on where the customer wants the media handled. In the first, the storage media is destroyed by shredding or degaussing on the customer's site, and Reboot Monkey staff carry out that processing where the hardware stands. Shredding breaks the media into pieces, and degaussing destroys the magnetic recording on it. In the other, the retired hardware is transported to a partner's processing facility and processed there by Reboot Monkey staff, with data wiping or physical destruction of the media.
ITAD applies to the customer's IT hardware as a whole, from servers and network equipment to the drives inside them. Each item follows the same route as far as it applies: collection, transport, processing of the storage media and, where the equipment can be used again, resale or buyback. Hardware without storage media is still collected and transported as part of the same job.
The request also needs the dates: the date from which the hardware is out of service and the date by which the site has to be cleared. Where the hardware is housed in a data centre, the request should name the data centre so that the collection is planned for that building.
The same steps apply whatever the size of the job; the size is one of the factors the quote depends on, together with the customer.
Why Reboot Monkey for ITAD in Spain
A customer's hardware passes through stages, and Reboot Monkey delivers a service for each of them. Rack and stack installs, mounts and cables new hardware. Server migration moves equipment between racks, rooms or facilities. Remote hands and smart hands cover the physical and technical tasks the customer instructs in between. Hardware monitoring covers the customer's servers and network equipment through the Reboot Monkey NOC. Data center decommissioning removes and disposes of retired hardware. ITAD closes that sequence with the handling of data and the resale or buyback of what can be used again.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That figure describes the company as a whole and not Spain alone.
Reboot Monkey is not a hosting company and does not own the data centres where its customers' hardware stands. Its part in a retirement project is therefore limited to the hardware and the services around it: collection, transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again.
For a CTO or IT director, the points to settle are where the data on retired drives goes and who handles the hardware on the way. In this service the drives are wiped or physically destroyed, and Reboot Monkey staff handle the hardware from collection to processing. For a procurement manager, the points are commercial: the job is quoted on request, and the resale or buyback of reusable equipment is quoted case by case, so each offer stands on the equipment it covers.
Customers who buy data-centre hardware from Reboot Monkey can raise its retirement with the same operator that sells, delivers, installs and supports it.
In an ITAD job for a customer in Spain, Reboot Monkey provides:
- Collection of the retired hardware at the customer's site or data centre, and its transport for processing
- Data wiping or physical destruction of the storage media, with shredding or degaussing available on the customer's site
- Processing by Reboot Monkey staff, in a partner's processing facility or on the customer's site
- Resale or buyback of equipment that can be used again, quoted case by case
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Spain.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in Spain?
IT asset disposition covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Spain, electronic waste falls under the Real Decreto 110/2015, and personal data on retired drives falls under Regulation (EU) 2016/679.
Where does Reboot Monkey process retired hardware in Spain?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Spain?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Spain?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Plan the retirement of your hardware
Send the location, the types of equipment and the handling you want for the storage media. Prices are quoted on request and depend on the customer and the size of the job.