Skip to content
Map of Switzerland: data centres as dots, the cities with a Reboot Monkey page highlighted: Zurich

Map: Natural Earth

ITAD

ITAD in Switzerland: IT Asset Disposition by Reboot Monkey

ITAD in Switzerland is the end-of-life handling of IT hardware: collection and transport, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff carry out the processing in a partner's processing facility or on the customer's site.

  • 9

    of our services in Switzerland

In depth

ITAD: 8 sections, open any to read more.

ITAD in Switzerland: How It Works

IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Switzerland, Reboot Monkey delivers these steps as one request.

The processing itself is carried out by Reboot Monkey staff, either in a partner's processing facility or on the customer's site. That is the first decision on any ITAD request: whether the work on the hardware happens at a processing facility after collection, or on the customer's own premises. The answer depends on the equipment and on what the customer requires for its storage media, so a request states both at the outset.

Resale or buyback applies only to the equipment that can be used again. Reboot Monkey quotes it case by case, so each job is assessed on its own terms and no general figure applies to every customer.

ITAD is the part of hardware retirement that deals with the equipment itself and the data stored on it. It is the work a customer raises when the question is what happens to the equipment, and to the data on it, once it has left service.

For a CTO or IT director, an ITAD request comes down to a short list of decisions: which hardware is retired, where it stands, how its storage media is treated, and whether any of it is offered for resale or buyback. For a procurement manager, the same list sets out what has to be quoted and which part is quoted case by case.

The request is the same whether the retired hardware stands on the customer's own premises or in a data centre. Only the collection point changes.

E-waste Rules in Switzerland

In Switzerland, electronic waste falls under the Verordnung über die Rückgabe, die Rücknahme und die Entsorgung elektrischer und elektronischer Geräte (VREG). For an organisation retiring IT hardware, the VREG is the Swiss ordinance to read when the question is how electronic waste is to be handled.

Reboot Monkey's part in this is the physical end-of-life work: collection and transport, treatment of the storage media, and resale or buyback of equipment that can be used again. An ITAD request does not replace the customer's own review of its obligations. How the VREG applies to a particular category of equipment is a question for the customer's legal or environmental function, and the request should carry the outcome of that review with it.

Electronic waste and personal data are separate questions. The VREG concerns the equipment as electronic waste; the data stored on retired drives is a different matter, and Swiss data protection law addresses it separately.

A request is scoped from four inputs. With them in hand, the collection can be planned, the items that can be used again can be assessed for resale or buyback, and the treatment of the storage media can be agreed before the engineer arrives on site. The engineer then attends with a defined list of what is to be collected and what is to be handled on the premises. The four inputs are:

  • A description of the hardware being retired, given as an asset list or a plain summary of what stands where, so that the collection can be sized.
  • The site or data centre where the hardware stands, which is the collection point.
  • The items that contain storage media, and the treatment wanted for them.
  • Whether any equipment is to be offered for resale or buyback.

Personal Data on Retired Drives in Switzerland

In Switzerland, personal data on retired drives falls under the Federal Act on Data Protection of 25 September 2020 (FADP), overseen by the Federal Data Protection and Information Commissioner (FDPIC). A drive that leaves service still holds what was written to it, so retirement is the point at which the customer has to deal with that data deliberately.

An ITAD job treats storage media in one of two ways: data wiping, or physical destruction. Physical destruction can take place on the customer's site. The treatment is chosen with the customer when the request is raised and forms part of the scope of the job.

Destroyed media cannot return to use, so the treatment choice also bears on what remains available for resale or buyback. The two treatments therefore need to be settled before the resale or buyback question, not after it.

Which drives hold personal data, and which treatment the customer's data protection function requires, are decisions the customer takes and brings to the request. Reboot Monkey's part is the physical handling of the hardware and the treatment of the storage media, carried out by its own staff.

A practical way to prepare is to list the items that contain storage media and to put four questions to each group of them, so that the request is specific about the media rather than about the hardware as a whole. The answers go into the request, and the job is scoped around them. The four questions are:

  • Does the group hold personal data that falls under the FADP?
  • Does the customer's data protection function accept data wiping for it, or does it require physical destruction?
  • If physical destruction is required, is it to take place on the customer's site?
  • Is any of the equipment in the group to be offered for resale or buyback?

How Collection and Destruction Work

Collection takes place where the hardware stands. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing, and the engineer who attends is dispatched to that location for the job.

When the hardware stands in a data centre, the building is not Reboot Monkey's. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request that names the data centre lets the collection be planned with that in mind.

Destruction on the customer's site is the other physical route. Storage media can be destroyed on the premises by shredding or degaussing, and the request states which of the two is wanted. Destruction on site and collection address different needs, so the request says which applies to each group of equipment: hardware for collection, storage media for destruction on the premises, and items for resale or buyback.

The difference between the two routes is where the storage media is while it is being treated. After collection, it is in a partner's processing facility or at the place where the processing is carried out; with on-site destruction, it stays on the customer's premises throughout the treatment.

Transport is part of the ITAD job itself, so a collection request includes the movement of the hardware to where it is processed.

A second, briefed Reboot Monkey engineer is named as backup for every customer site, which includes the site where the collection or the on-site destruction takes place.

ITAD can also follow other physical work on the same site, such as data center decommissioning or server migration, when some of the equipment involved has reached the end of its life.

IT Asset Disposition Process Flow

Every ITAD request follows the same order of work. What differs from one request to the next is whether the hardware is collected for processing, whether the storage media is destroyed on the customer's site, and whether any equipment is offered for resale or buyback. Those points are settled in the first step and carried through the rest.

For hardware that is collected, the work runs from collection through transport to processing and, for equipment that can be used again, to resale or buyback. For storage media destroyed on the customer's site, the work runs from the request and the scoping to destruction on the premises. In both cases, Reboot Monkey staff do the processing.

The order of work is as follows:

  • Request. The customer states which hardware is retired, where it stands, the treatment wanted for the storage media and whether any equipment is to be offered for resale or buyback.
  • Scoping. Reboot Monkey scopes the job from the request, confirms the collection point and the treatment of the storage media, and dispatches an engineer to the customer's site or data centre.
  • Collection. The engineer collects the retired hardware at the site. Where the request calls for destruction on the premises, the storage media is destroyed there.
  • Transport. Reboot Monkey transports the collected hardware for processing, which takes place in a partner's processing facility and is carried out by Reboot Monkey staff.
  • Processing. Reboot Monkey staff carry out the data wiping or the physical destruction of the storage media that the request specified.
  • Resale or buyback. Equipment that can be used again is taken through resale or buyback, and Reboot Monkey quotes this case by case.

Why Reboot Monkey for ITAD in Switzerland

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. It is not a hosting company and not a datacenter owner, so ITAD is delivered as service work on the customer's hardware, at the customer's site or data centre, with processing by Reboot Monkey staff.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. This is a company-wide figure and not a statement about any single country.

ITAD is the final step of the hardware life cycle that the other Reboot Monkey services support. Rack and stack puts new hardware into the rack. Remote hands, smart hands and hardware monitoring support the hardware while it runs. Server migration and data center decommissioning move it or remove it. A customer that wants retirement handled by the operator that installed and supported the hardware can raise the ITAD request with that same operator.

Prices are quoted on request and depend on the customer and the size of the job. For ITAD, the size of the job is read from the request, which names the hardware and where it stands.

The other services in the range are defined as follows:

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Switzerland.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Switzerland?

IT asset disposition covers the end-of-life handling of a customer's IT hardware in Switzerland: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre, and on the customer's site storage media can be destroyed by shredding or degaussing.

Where does Reboot Monkey process retired hardware in Switzerland?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Switzerland?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Switzerland?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Plan the retirement of your hardware in Switzerland

Send the list of hardware, the site or data centre where it stands, and the treatment wanted for the storage media. Prices are quoted on request.

Published:

Get a quote