Skip to content

Tajikistan · Dushanbe

Remote Hands in Dushanbe

Remote Hands in Dushanbe means physical tasks on your equipment, such as reboots, cable checks, component swaps and visual checks, carried out on your instruction by a Reboot Monkey engineer dispatched to your facility. Reboot Monkey sells the service. It does not own or host the data centre.

Remote Hands

  • 8

    services detailed for Dushanbe

  • 1

    agreement for every city

Request a Remote Hands Quote

Describe the task, the equipment and the building. Reboot Monkey replies with a quote for the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Dushanbe

Remote hands is physical work on your equipment, carried out on your instruction by a Reboot Monkey engineer who is dispatched to your facility. The tasks are reboots, cable checks, component swaps and visual checks. Each job starts with your instruction: the task, the equipment and the rack it concerns.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a buyer in Dushanbe, this means the hands-on work is a service wrapped around equipment that already sits in a building you use, or is about to.

Work that needs diagnostic judgement and configuration knowledge is smart hands, not remote hands. The two are separate services, so state which one you need when you write in and the request can be routed correctly.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

Datacenter Facilities in Dushanbe

Data centres in Dushanbe, ordered by the number of networks present:

  • NKT-HUB (NURI KOINOT LLC), 5b, Mirzo Mastangulov st., 734000 Dushanbe: 3 networks

Our Remote Hands Services

Requests for on-site IT support in Dushanbe data centers are handled by dispatching a Reboot Monkey engineer to the customer's rack. The services below are defined by what the engineer does at the equipment, so you can match a job to the right one before you send the request.

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey is a vendor-neutral operator that sells the service around your equipment. A second, briefed Reboot Monkey engineer is named as backup for every customer site.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Remote hands therefore stays with the equipment in your rack: the engineer follows your instruction, carries out the physical task and leaves the building systems to the operator.

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack. For fibre faults, a fibre inspection scope and cleaning kit are available on request.

Prices are quoted on request and depend on the customer and the size of the job. A request is easiest to scope when it states the task, the equipment concerned and which service applies: remote hands, smart hands, rack and stack or server migration. Reboot Monkey then replies with a quote for that job.

How Reboot Monkey Works

These terms apply in every facility in Dushanbe where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Dushanbe?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's facility and works at the rack. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack.

Do you provide on-site IT support in Dushanbe data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility and carry out physical work at the rack: remote hands tasks, smart hands work that needs diagnostic judgement and configuration knowledge, rack and stack of new hardware, and server migration between racks, rooms or facilities. A request starts with the customer's instruction describing the job.

Do you work in every datacenter in Dushanbe?

Reboot Monkey engineers work in any facility in Dushanbe where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Dushanbe?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Dushanbe?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request a Remote Hands Quote

Describe the task, the equipment and the building. Reboot Monkey replies with a quote for the job.

Published:

Get a quote