Skip to content

Rack and Stack

Server Racking in Ukraine

Server racking in Ukraine is the installation, mounting and cabling of new hardware in the customer's rack. Reboot Monkey engineers carry out rack and stack work in the data center the customer has chosen. The scope covers cabling, labelling and power-on checks, and quotes are on request.

  • 9

    of our services in Ukraine

Choose your city

In depth

Rack and Stack: 8 sections, open any to read more.

Server Racking in Ukraine: How It Works

Rack and stack means installing, mounting and cabling new hardware. For a company that places equipment in Ukraine, Reboot Monkey provides the engineers who carry out that work in the data center the customer has chosen. The hardware may be servers, network equipment or the nodes of a GPU or AI cluster, and the job is defined by what the customer wants installed and in which racks.

A request starts with the customer describing the job: the equipment to be installed, the data center and the racks it is destined for. Quotes are on request and depend on the customer and the size of the job. Once the quote is agreed, Reboot Monkey engineers are dispatched to the customer's facility to carry out the installation.

The scope of a rack and stack job covers cabling, labelling and power-on checks. The mounting of each device, the cabling that connects it, the labelling of that cabling and the power-on check are therefore one piece of work, and the equipment ends the job installed, cabled and labelled in the customer's rack.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Hardware that needs network links is connected through cross connects and carrier circuits. Reboot Monkey orders them from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. For fibre links, a fibre inspection scope and cleaning kit are available on request.

The details a customer provides with the request (the hardware list, the target racks and the cabling to be installed) are what the quote and the engineers' work refer to. The clearer those details are at the start, the more precisely the job can be scoped and quoted.

Installation is the start of a rack's working life rather than the end of the engagement. Physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks) are remote hands, and technical work that needs diagnostic judgement and configuration knowledge is smart hands. Both can be requested for the same racks, and recurring work can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request.

Datacenter Landscape in Ukraine

Data centres in Ukraine, ordered by the number of networks present:

  • NewTelco Kiev (NewTelco Ukraine), Gaidara 50, 1033 Kyiv: 158 networks; carriers Arelion, NetIX, RETN and i3D.net
  • Ucomline Kiev (Ucomline (Digital Generation)), Leontovicha 9, Building 3, Kyiv: 73 networks; carriers RETN
  • 9 Leontovicha (NetAssist LLC), 9 Leontovicha Street, Building 2, 01030 Kyiv: 42 networks
  • Giganet (Giganet IXN - Ukrainian Backbone Networks): 31 networks
  • OD-IX (Giganet IXN - Ukrainian Backbone Networks): 29 networks; carriers RETN
  • UARNet Lviv, Doroshenka street, 41, 79007 Lviv: 26 networks
  • BeMobile, Kurenivska St, 21-A, 02000 Kyiv: 22 networks; carriers RETN
  • TSUA, Leontovicha 9, building 3, flour 3, 01030 Kyiv: 22 networks
  • Data Center Ukr-Com (UKRCOM LLC), 50b Simyi Prakhovykh Str., 01033 Kyiv: 17 networks
  • Omega Telecom Kyiv (Omega Telecom LLC), Vatslava Havela Blvd., 4, 03067 Kyiv: 17 networks

Rack and Stack by City

City pages for rack and stack in Ukraine:

  • Kyiv: https://www.rebootmonkey.com/en/ukraine/kyiv/rack-and-stack/

Server Racking in Ukraine: What We Deliver

Installation of new hardware is one part of the physical work a deployment needs. Reboot Monkey offers these related services alongside rack and stack, each with its own definition:

In a new or expanding deployment, rack and network design gives the installation its reference. The rack layout and the network topology are set out first, and the design ends with documentation and a controlled handover, so the engineers who install the hardware work from a written design.

A GPU or AI cluster is installed by the same method as other hardware: racking and cabling, with node swaps when a node has to be replaced. The GPU and AI deployment package covers the same racking, cabling and node swaps as a single package.

Inventory work compares what is physically in the racks with the customer's asset list. Each item is recorded by serial number, asset tag and rack position, which gives the customer a record of the equipment in the data center that can be read against its own list.

Spares and component swaps are connected. Remote hands include component swaps on the customer's instruction, and spares are kept in the customer's rack on request, so a replacement part is already in place when a swap is needed.

Moving equipment out of service uses the other half of the service list. Server migration is the moving of equipment between racks, rooms or facilities. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. Data center decommissioning is the removal and disposal of retired hardware. The three differ in where the hardware ends up: in another rack or building, in a new location while retired items are removed, or out of the data center altogether.

  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
  • GPU and AI cluster deployment: racking, cabling and node swaps.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
  • Inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
  • Dark fibre and wavelengths: dark fibre between data centres and wavelength circuits, ordered from the carriers and quoted on request.

Why Reboot Monkey for Server Racking in Ukraine

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and not a datacenter owner. For a buyer, this means the rack and stack work is sold together with the other things a deployment needs, by one operator.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. The named backup applies to rack and stack work in Ukraine in the same way as to any other site.

A new rack usually needs connectivity and addresses as well as installation. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement. Cross connects and carrier circuits are ordered as described for the installation itself, so the cabling work and the network order sit with the same operator.

A further option is IT infrastructure turnkey and run. You or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The installation of the hardware is part of that arrangement, carried out by Reboot Monkey engineers.

The way a service is quoted follows the service. Rack and stack quotes depend on the customer and the size of the job. IP transit is quoted per data center. Remote hands retainers and hour blocks are agreed per customer and quoted on request. IT asset disposition with the buyback of retired hardware is quoted case by case. A buyer who knows which of these applies can describe the request accordingly, and the quote follows from that description.

The definitions also decide which request to make. Rack and stack concerns new hardware: installing, mounting and cabling it. Remote hands concern physical tasks on the customer's instruction, and smart hands concern work that needs diagnostic judgement and configuration knowledge. Hardware monitoring is done by the Reboot Monkey NOC rather than by an engineer on site, so it complements the physical services and does not replace them.

How Reboot Monkey Works

These terms apply in every facility in Ukraine where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Countries

A rack and stack request in Ukraine is often one step in a larger deployment. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A buyer whose installation continues in another country can describe the same scope there: cabling, labelling and power-on checks on new hardware.

When the same hardware has to go into several sites, the work can be set up as a multi-site rollout: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. The customer describes the programme once, and the engineers carry it out site by site, each under the site rules of its own operator.

A team planning the same installation work in Britain can request it through Rack and Stack in United Kingdom. Equipment going into American data centers is requested through Rack and Stack in United States. For hardware headed to Turkish data centers, the request goes through Rack and Stack in Turkey. A deployment in the Emirates is requested through Rack and Stack in United Arab Emirates.

Wherever the installation takes place, the building belongs to its operator and the equipment belongs to the customer. Reboot Monkey supplies the engineers and the delivery services between them, from the first cabling to the later remote hands and smart hands work, and from spares kept in the rack to the removal of retired hardware. A customer that expects to extend a deployment can therefore plan the next country's installation with the same service definitions already in use in Ukraine.

Frequently Asked Questions

What does rack and stack cover in Ukraine?

Rack and stack covers cabling, labelling and power-on checks for new hardware that Reboot Monkey engineers install and mount in the customer's rack. The same job can include network cabling to cross connects and carrier circuits ordered from the facility operator and the carriers, and spare parts kept in the rack on request. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Ukraine?

Reboot Monkey engineers work in any facility in Ukraine where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Ukraine?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with rack and stack in Ukraine?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan Your Server Racking in Ukraine

Describe the hardware, the data center and the racks, and Reboot Monkey will quote the rack and stack job.

Published:

Get a quote