Uruguay · Pando
Smart Hands in Pando
Smart hands in Pando is technical work on your equipment that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to your facility and carry out on-site IT support in Pando data centers on your instruction.
In Smart Hands
- Smart Hands
- Data Center Decommissioning
- Rack and Stack
- Remote Hands
- Server Migration
- Colocationon request
- Data Center Migrationon request
- ITADon request
Smart Hands
6
services detailed for Pando
1
agreement for every city
Request Smart Hands in Pando
Send the task, the equipment involved and the site, and Reboot Monkey will respond with a quote.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Pando
Data Center Internacional Ingeniero Jose Luis Massera stands on Bypass de Pando in Pando.
Smart hands is the part of datacenter support where the engineer has to think, not only act. A server drops out of a cluster, a link comes up but passes no traffic, a replacement part has to be configured before it is useful: these tasks need diagnostic judgement and configuration knowledge. Tasks that are purely physical, such as a reboot, a cable check, a component swap or a visual check, are remote hands. The two services are ordered separately, so you can match the engineer's skill to the task.
A request starts with a description of the task, the equipment involved and the site where it stands. Reboot Monkey assigns an engineer, and that engineer is dispatched to your facility in Pando to carry out the work on your instruction. Your equipment stays in your rack and under your control. Reboot Monkey does not move it into a hosting environment of its own, because Reboot Monkey is a third-party datacenter services operator and not a hosting company.
Datacenter Facilities in Pando
Data centres in Pando, ordered by the number of networks present:
- Data Center Internacional Ingeniero Jose Luis Massera (ANTEL), Bypass de Pando, 15600: 2 networks; carriers ANTEL Internacional
Our Smart Hands Services
Smart hands work in Pando is carried out inside the customer's facility. The tasks below are the ones buyers most often put in a request, and each is handled as technical work rather than as a button press.
- Fault diagnosis on servers and network equipment, where the engineer works through the symptoms with you and reports what was found.
- Configuration work on hardware that has been installed or replaced, following the settings you provide.
- Cabling in the customer's rack: Reboot Monkey engineers install and patch the cabling for the network Reboot Monkey sells for the rack.
- Cross connects and carrier circuits: Reboot Monkey orders them from the facility operator and from the carriers present in the facility.
- Rack and stack, meaning installing, mounting and cabling new hardware.
- Server migration, meaning moving equipment between racks, rooms or facilities.
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. That position shapes how a Pando job is handled. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Continuity is built into the way sites are staffed: a second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the person who steps in already knows the site.
Reboot Monkey's reach comes from field engineers rather than from owned buildings. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company with equipment in Pando and elsewhere, that means one supplier can handle the physical work across several sites.
Prices are quoted on request and depend on the customer and the size of the job. To scope a task, send the equipment involved, the work required and the site, and Reboot Monkey will respond with a quote.
How Reboot Monkey Works
These terms apply in every facility in Pando where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Pando?
Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers in the customer's facility in Pando. This includes fault diagnosis, configuring installed or replaced hardware, and cabling. Purely physical tasks such as reboots, cable checks, component swaps and visual checks are remote hands. Rack and stack and server migration are ordered as their own services.
Do you provide on-site IT support in Pando data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Pando and work on the customer's equipment in the rack. They install and patch cabling, and a fibre inspection scope and cleaning kit are available on request. A request begins with the task, the equipment involved and the site, and the engineer then carries out the work on the customer's instruction.
Do you work in every datacenter in Pando?
Reboot Monkey engineers work in any facility in Pando where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Pando?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Pando?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Request Smart Hands in Pando
Send the task, the equipment involved and the site, and Reboot Monkey will respond with a quote.