Uzbekistan · Tashkent
Rack and Stack in Tashkent
Rack and stack in Tashkent means installing, mounting and cabling new hardware in your rack. Reboot Monkey engineers carry out the cabling, labelling and power-on checks inside a data centre that another company owns and runs. Quotes are on request.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Tashkent
1
agreement for every city
Plan your Tashkent install
Send the hardware list and rack location, and Reboot Monkey will quote the rack and stack work.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Tashkent
Comnet Tashkent stands on Shahrisabz str in Tashkent. When new servers, switches or storage arrive for a Tashkent deployment, someone has to get them out of the boxes, into the rack and connected before the project can move on. Rack and stack is that physical installation work: installing, mounting and cabling new hardware. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner, so the work is done inside a data centre that another company owns and runs, in the rack you have contracted. For a buyer planning a deployment, that means the install schedule follows the operator's access arrangements, and the scope below is limited to what happens inside your rack.
Datacenter Facilities in Tashkent
Data centres in Tashkent, ordered by the number of networks present:
- Comnet Tashkent (IPLUS LLC), Shahrisabz str. 10B, 100015 Tashkent: 1 network
- ITI-IX-T252 (Independent Telecom Innovations LLC / tm "ITI-IX"), Yakub koloss,10 str., 10060 Tashkent: 1 network
- Sarkor DC (ISP Sarkor Telecom), Salar Buyi str., building 1, 100000 Tashkent: 1 network
- ITI-IX-T233 (Independent Telecom Innovations LLC / tm "ITI-IX"), Istiklol ,51 str., 10060 Tashkent
- TECH-TAS-233 (Independent Telecom Innovations LLC / tm "Metrotelecom".), Istiklol Str.23, 10060 Tashkent
- TECH-TAS-252 (Independent Telecom Innovations LLC / tm "Metrotelecom".), Ykub Kolos 10 str, 10060 Tashkent
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. In practice a job in Tashkent runs in this order.
You send the hardware list, the rack location and the cabling plan. A Reboot Monkey engineer is dispatched to the facility, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so the job does not depend on one person being available on the day.
The engineer mounts the equipment, cables it to your plan and labels every cable and device so that later work by you or by a remote hands engineer can be traced without guesswork. Once the hardware is connected, power-on checks confirm that each device starts and is ready for your own team to configure remotely.
When the rack also needs network, Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. If a fibre link needs checking at installation, a fibre inspection scope and cleaning kit are available on request.
- Mounting new servers, switches and storage in the rack
- Cabling to the plan you supply, with labelling on every cable and device
- Power-on checks once the hardware is connected
- Cross connect and carrier circuit ordering, with patching in your rack
- Fibre inspection scope and cleaning kit on request
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. For a Tashkent deployment this means one supplier can cover the hardware, the rack, the connectivity and the physical installation, rather than splitting them across several parties who each point to another when something is late.
Rack and stack also sits beside the other physical services. After installation, remote hands covers tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Server migration covers moving equipment between racks, rooms or facilities, and hardware monitoring means the Reboot Monkey NOC watches your servers and network equipment.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Prices are quoted on request and depend on the customer and the size of the job, so a quote reflects your actual hardware count and cabling plan.
How Reboot Monkey Works
These terms apply in every facility in Tashkent where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Tashkent?
Rack and stack in Tashkent covers installing, mounting and cabling new hardware in your rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers inside the data centre under the facility operator's site rules. Quotes are on request and depend on the customer and the size of the job.
Do you work in every datacenter in Tashkent?
Reboot Monkey engineers work in any facility in Tashkent where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Tashkent?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Tashkent?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Tashkent install
Send the hardware list and rack location, and Reboot Monkey will quote the rack and stack work.