Skip to content

Vietnam · Hanoi

Rack and Stack in Hanoi

Rack and stack in Hanoi means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the work on site, with cabling, labelling and power-on checks included in the scope.

Rack and Stack

  • 8

    services detailed for Hanoi

  • 1

    agreement for every city

Plan your install in Hanoi

Send the equipment list and target rack. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Hanoi

FPT Fornix HNI 02 stands on FPT Fornix Tower in Hanoi. Buyers who place new servers, storage or network equipment in the city usually need the same thing: hardware that arrives, is mounted correctly, is cabled to the intended ports and is confirmed powered on before anyone else in the organisation depends on it. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters, so the rack and stack work in Hanoi is performed in the customer's chosen facility, under that facility's rules. For a procurement manager this means the access steps for a delivery or an install are agreed with the operator, and the engineer follows them on the day.

Datacenter Facilities in Hanoi

Data centres in Hanoi, ordered by the number of networks present:

  • FPT Fornix HNI 02 (FPT Telecom), FPT Fornix Tower, No 10 Pham Van Bach Street, Cau Giay Ward, Hanoi, Vietnam, 10000: 6 networks
  • Viettel HLC (Viettel Group), Viettel Building, Hoa Lac High Tech Zone, Km29, Thang Long Street, Thach That Dstrict, 100000 Hanoi: 6 networks
  • Telehouse - Hanoi (Telehouse - Global Data Centers), FPT Building, Duy Tan Street, Cau Giay District, 3rd & 4th floors, 100000 Hanoi: 3 networks
  • VNIX-HN (Vietnam Internet Network Information Center), 18 Nguyen Du Street - Ha Noi - VietNam, 10000 Hanoi: 2 networks
  • EcoDC (HITC), EcoDC Building, Hanoi Telecom High-Tech Complex, ICT Park, Lot E4 – Km 27 + 300, Thang Long Avenue, Thach That Commune, 100000: 1 network
  • FPT Fornix HNI 01 (FPT Telecom), FPT Building, Duy Tan Street, Cau Giay District, 10000 Hanoi: 1 network
  • CMC Duy Tan (Hanoi) (CMC Telecom), CMC Building, Duy Tan Street Dich Vong Hau Ward, Cau Giay Distric, Hanoi City, 700000

Our Rack and Stack Services

Rack and stack is the installation of new hardware: mounting it in the rack, cabling it and bringing it to a working state. In Hanoi the scope covers cabling, labelling and power-on checks, and quotes are on request. Prices are quoted on request and depend on the customer and the size of the job, so a quote is based on what you send us about the equipment and the rack.

A typical request runs in this order:

  • You send the equipment list, the target rack and the cabling plan, together with any delivery details.
  • Reboot Monkey quotes the job and a second, briefed Reboot Monkey engineer is named as backup for your site.
  • An engineer is dispatched to the facility, mounts the hardware in the rack and installs the cabling.
  • Each cable and device is labelled, and a power-on check confirms the hardware starts.
  • You receive confirmation that the work is complete, so your own team can begin configuration.

Why Reboot Monkey

Network is part of the same job. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A buyer therefore deals with one party for the hardware installation and the connectivity that goes with it, instead of coordinating the operator, the carrier and an installer separately.

Where a fibre link needs checking, a fibre inspection scope and cleaning kit are available on request. Rack and stack also connects to the other services in the range. If the hardware later has to move between racks, rooms or facilities, that is server migration. If a task needs diagnostic judgement and configuration knowledge, that is smart hands. If you only need a reboot, a cable check or a component swap on your instruction, that is remote hands.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a multi-site rollout, the same way of working applies from one install to the next.

How Reboot Monkey Works

These terms apply in every facility in Hanoi where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Hanoi?

Rack and stack covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey engineers carry out the work under the facility operator's site rules, and a second, briefed engineer is named as backup for every customer site.

Do you work in every datacenter in Hanoi?

Reboot Monkey engineers work in any facility in Hanoi where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Hanoi?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Hanoi?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your install in Hanoi

Send the equipment list and target rack. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote