Zambia · Lusaka
Smart Hands in Lusaka
Smart hands is technical work inside the data centre that needs diagnostic judgement and configuration knowledge, beyond a reboot or a cable swap. Reboot Monkey dispatches field engineers for on-site IT support in Lusaka data centers, working in the customer's racks under the facility operator's site rules.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Lusaka
1
agreement for every city
Request Smart Hands in Lusaka
Describe the task and the rack location, and Reboot Monkey will scope the work and quote it.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Lusaka
NetOne Data Lusaka stands on Zambesi Road in Lusaka. A business that places equipment in a Lusaka data centre usually cannot keep its own staff next to the racks, and that is the gap smart hands closes. Smart hands is technical work that needs diagnostic judgement and configuration knowledge: finding why a link is down rather than only power-cycling the device, checking a configuration against what the customer specified, or tracing a fault across cabling and ports. It sits one step above remote hands, which covers physical tasks carried out on the customer's instruction such as reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building. That separation matters for a buyer: the engineer who attends your rack answers to you and to your ticket, not to the landlord. Work in Lusaka is dispatched from that field network to the customer's site, so the same way of working applies here as in any other location.
Datacenter Facilities in Lusaka
Data centres in Lusaka, ordered by the number of networks present:
- NetOne Data Lusaka (NetOne Information Technology Limited), 12553 Zambesi Road, 10101 Lusaka: 2 networks
- Paratus Vanguard (Paratus Group Holdings LTD), 34 Bwinjimfumu Rd, 0000 Lusaka: 1 network
- INFRATEL Data Centre - Backup Facility (INFRATEL Corporation Zambia Limited), Lusaka, 10101
- INFRATEL Data Centre - Production Centre (INFRATEL Corporation Zambia Limited), Lusaka, 10101
Our Smart Hands Services
A smart hands request starts with the customer describing the task or the fault. The work is then scoped against the services Reboot Monkey delivers inside the facility, and an engineer is dispatched to the rack. Each service has a defined meaning, so a ticket states which one applies.
- Smart hands: diagnostic and configuration work on servers and network equipment that needs technical judgement, not only a physical action.
- Remote hands: physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Rack and stack: installing, mounting and cabling new hardware in the customer's rack.
- Server migration: moving equipment between racks, rooms or facilities.
- Network and cabling: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, so a fault can become a smart hands ticket.
- Decommissioning and IT asset disposition: removal of retired hardware, data wiping, on-site shredding or degaussing, collection and transport, with resale or buyback quoted case by case.
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and not a datacenter owner, so the advice and the work are not tied to one facility's own product line.
For continuity, a second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the backup already knows the site, the rack layout and the task history, which removes the usual delay of briefing a stranger at the door.
When a fibre link is suspected, a fibre inspection scope and cleaning kit are available on request, so a dirty or damaged connector can be checked on site before a carrier or the operator is called in.
The scope of a job and its cost depend on the customer and the size of the work. Prices are quoted on request and depend on the customer and the size of the job. To start, send the task, the rack location and the equipment involved, and the request is scoped from there.
How Reboot Monkey Works
These terms apply in every facility in Lusaka where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Lusaka?
Smart hands covers technical work inside the data centre that needs diagnostic judgement and configuration knowledge, as opposed to a simple physical task. Reboot Monkey engineers handle this for customer equipment in Lusaka, alongside related services such as rack and stack, server migration, cabling and the removal of retired hardware. Reboot Monkey does not own the building.
Do you provide on-site IT support in Lusaka data centers?
Yes. A request begins with the customer describing the task or fault, then the work is scoped and an engineer attends. A second, briefed engineer is named as backup for every customer site.
Do you work in every datacenter in Lusaka?
Reboot Monkey engineers work in any facility in Lusaka where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Lusaka?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Lusaka?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Request Smart Hands in Lusaka
Describe the task and the rack location, and Reboot Monkey will scope the work and quote it.