Skip to content
Map of Argentina: data centres as dots, the larger cities circled

Map: Natural Earth

Server Migration

Server Migration in Argentina

Server migration in Argentina is the physical move of equipment between racks, rooms or facilities. Reboot Monkey engineers carry out the move inside the customer's data centres, either running the whole job or working alongside the customer's own team. Scope is agreed per project.

  • 7

    of our services in Argentina

Services in Server Migration

In depth

Server Migration: 8 sections, open any to read more.

Server Migration in Argentina: How It Works

Server migration is the movement of equipment between racks, rooms or facilities. In Argentina, Reboot Monkey carries out this physical work inside data centres that other companies own and run. Reboot Monkey is a third-party datacenter services operator: it is not a hosting company and it does not own datacenters, so the servers, switches and storage being moved are the customer's own, and the destination is a rack, room or facility the customer names.

Responsibility for each step of a move is settled at the start. Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project. A customer may keep the testing of its own systems and hand over the disconnection and reconnection, or hand over every step. Because the split is agreed per project, a migration request starts with a conversation about scope.

The three cases of a move differ in what has to be coordinated. A move between racks stays within one room. A move between rooms stays within one building. A move between facilities involves two buildings and engineers at both ends, and the work at each end is scoped separately.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

A request for server migration in Argentina follows this sequence:

  • Contact Reboot Monkey with the source location, the destination, the equipment to be moved and the split of work the customer's team prefers.
  • Reboot Monkey and the customer agree the scope per project, including who disconnects, reconnects and tests each system. A quote for the job is provided on request and depends on the customer and the size of the job.
  • Reboot Monkey engineers are dispatched to the customer's facility and, where the equipment moves to another location, to the destination as well.
  • The equipment is disconnected, moved, reconnected and tested by the parties named in the scope.
  • Where the customer wants a record of the result, Reboot Monkey records the equipment by serial number, asset tag and rack position, against the customer's asset list.

Datacenter Landscape in Argentina

Data centres in Argentina, ordered by the number of networks present:

  • Cabase BUE (Cámara Argentina de Internet (CABASE)), Suipacha N° 128, C1008 Buenos Aires: 159 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, EdgeUno, IPLAN Telecomunicaciones - NSS S.A. and others
  • Cirion Buenos Aires - BUE1, Av. Del Campo 1301, C1427APA Buenos Aires: 79 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, EdgeUno, LINKEAR SRL and others
  • Pacheco Datacenter EZE1 Argentina Buenos Aires (TELECOM ARGENTINA), Colectora Este 32375, B1618FBB Buenos Aires: 44 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, LINKEAR SRL, Personal Argentina and others
  • Cabase COR (Cámara Argentina de Internet (CABASE)), Universidad Nacional de Córdoba, Pabellón Argentina, Haya de la Torre s/n, X5000HUA: 26 networks
  • Cabase MZA (Cámara Argentina de Internet (CABASE)), General Paz N° 586, Planta Baja Local 1, M5500 Mendoza: 19 networks
  • Datacenter SYT (Servicios y Telecomunicaciones S.A.), Suipacha 128, 1401 Buenos Aires: 19 networks; carriers ANTEL Internacional, Cirion, EdgeUno, Personal Argentina and Servicios y Telecomunicaciones S.A
  • Cabase LPL (Cámara Argentina de Internet (CABASE)), CESPI, Calle 50 esq. 115 Piso 3, 1900 La Plata: 16 networks; carriers Metrotel
  • Cabase NQN (Cámara Argentina de Internet (CABASE)), Ing. Cipolletti 216, 8300 Neuquén: 16 networks
  • Cabase POS (Cámara Argentina de Internet (CABASE)), Campus Universitario de la Universidad Nacional de Misiones, Ruta 12 Km 7 1/2, 3304 Posadas: 12 networks
  • Cabase UAQ (Cámara Argentina de Internet (CABASE)), Av. San Martín Oeste 1109, J5400 San Juan: 12 networks

Server Migration by City

City pages for server migration in Argentina:

  • Buenos Aires: https://www.rebootmonkey.com/en/argentina/buenos-aires/server-migration/

Server Migration in Argentina: What We Deliver

The services combine according to what the move involves. A customer relocating to a new location and retiring part of its estate would scope datacenter exit and relocation, which covers both the physical move and the disposal of the retired hardware. A customer adding capacity while moving existing equipment would scope the move together with rack and stack for the new hardware and structured cabling between the racks. A customer moving equipment between two of its own sites would scope the move alone, with cabling added where the destination racks need it. A customer relocating GPU or AI equipment would add the GPU and AI cluster deployment service for racking, cabling and node swaps at the destination.

Work that continues after the move is scoped separately. Remote hands retainers and hour blocks suit recurring work: remote hands is agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request.

Every one of these services is scoped around the customer's own equipment and asset list, so the first message of a request is most useful when it names what is moving, what is new and what is being retired.

Reboot Monkey engineers carry out the installation, cabling and removal work in the customer's racks; the supply of hardware and spares is arranged alongside it where the project needs them.

A migration project can draw on several related services, each scoped per project:

  • Rack and stack: installing, mounting and cabling new hardware, for equipment that arrives at the destination as new rather than moved.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
  • Data center decommissioning: removing and disposing of retired hardware.
  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
  • GPU and AI cluster deployment: racking, cabling and node swaps.

Why Reboot Monkey for Server Migration in Argentina

Reboot Monkey sells the network for the rack as well as the physical work: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A migration to a new location can therefore include the circuit at the destination and the patching in the customer's rack in the same request as the move itself.

Reboot Monkey also sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, so a customer moving into new rack space can source it in the same project. IPv4 leasing is offered alone or together with IP transit and rack space under one agreement.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. In a project that touches a source site and a destination site, each has its own named backup. The backup is part of the arrangement for every customer site, not an addition requested for a particular move.

Reboot Monkey engineers work on the customer's instruction, so the customer's own team stays the point of decision for what is moved and when. Because Reboot Monkey is not a hosting company, a migration leaves the customer's servers and the workloads on them with the customer; Reboot Monkey moves, cables and supports the hardware.

Where the destination is a new or expanding deployment, rack and network design sets out the rack layout and the network topology, ending with documentation of the design and a controlled handover.

After a move, hardware monitoring is available: the Reboot Monkey NOC monitors the customer's servers and network equipment, and remote hands can serve the equipment once it is installed in its new rack.

Where a migration is one part of a larger infrastructure change, IT infrastructure turnkey and run is an option: you or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.

How Reboot Monkey Works

These terms apply in every facility in Argentina where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Server Migration in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A server migration that leaves Argentina, arrives in it, or links a site in Argentina with a site elsewhere can be raised as one request, and Reboot Monkey scopes the work at each location.

For equipment that is also moving in Australia, see Server Migration in Australia.

A move between locations is two pieces of physical work. At the departure site, the equipment is disconnected by whoever the scope names. At the arrival site, the equipment is reconnected and tested, again by whoever the scope names. The split of work can differ between locations. Hardware that is retired rather than moved is removed and disposed of as part of datacenter exit and relocation or data center decommissioning.

The order of work is part of the scope. The project names which location is handled first, which items travel together, and which items are replaced by new hardware instead of being moved. Each location is scoped with its own list, rack positions and connectivity.

Where the same installation work is needed at several of the customer's sites, multi-site rollouts apply: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers.

Where a project spans several data centers, IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. Dark fibre and wavelengths, meaning dark fibre between data centres and wavelength circuits, are ordered from the carriers and quoted on request.

Quotes for a multi-location project are provided on request and depend on the customer and the size of the job.

Each location in a multi-location request needs the same information:

  • The equipment leaving or arriving, listed against the customer's asset list.
  • The rack position for each item at the destination.
  • The network connectivity the destination needs.
  • The split of work at that location: who disconnects, reconnects and tests.
  • Any retired hardware that is to be removed and disposed of.

Frequently Asked Questions

What does server migration cover in Argentina?

Server migration in Argentina covers the physical move of a customer's equipment between racks, rooms or facilities. Reboot Monkey can run the whole move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Cabling, new hardware installation and the removal of retired hardware can be scoped into the same project.

Do you work in every datacenter in Argentina?

Reboot Monkey engineers work in any facility in Argentina where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Argentina?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with server migration in Argentina?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan Your Server Migration in Argentina

Send the source location, the destination and the equipment list. Reboot Monkey agrees the scope and the split of work with you per project.

Published:

Get a quote