Map: Natural Earth
Smart Hands
Smart Hands in Argentina
Smart Hands in Argentina is technical work inside a data center that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers dispatched to the customer's facility. Reboot Monkey delivers it as a third-party datacenter services operator, inside data centers that other companies own and run.
7
of our services in Argentina
Choose your city
Services in Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Remote Handson request
- ITADon request
In depth
Smart Hands: 8 sections, open any to read more.
Smart Hands in Argentina: How It Works
Smart Hands in Argentina covers the technical work a customer needs done at the rack when the task cannot be reduced to a single instruction. Reboot Monkey defines smart hands as technical work that needs diagnostic judgement and configuration knowledge. Remote hands is the neighbouring service: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. When the cause of a fault is unclear, or equipment has to be configured and not only touched, the job is smart hands. When the action is already defined, it is remote hands.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Smart hands is therefore work on the customer's servers, network equipment and the cabling in the customer's rack, done inside a building that belongs to someone else.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
A job that mixes both kinds of work splits along the same line: the physical part is remote hands work, and the part that needs judgement is smart hands. The distinction decides how a request is scoped, quoted and staffed. Work that depends on diagnosis and configuration stays with smart hands, because the engineer has to judge what the equipment is doing before acting.
A smart hands request moves through three steps:
- The customer describes the task, the equipment involved and the data center where it stands, and states what is already known about the fault.
- Reboot Monkey reviews the request and quotes the work. Prices are quoted on request and depend on the customer and the size of the job.
- A Reboot Monkey engineer is dispatched to the customer's facility and carries out the work on the customer's equipment.
Datacenter Landscape in Argentina
Data centres in Argentina, ordered by the number of networks present:
- Cabase BUE (Cámara Argentina de Internet (CABASE)), Suipacha N° 128, C1008 Buenos Aires: 159 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, EdgeUno, IPLAN Telecomunicaciones - NSS S.A. and others
- Cirion Buenos Aires - BUE1, Av. Del Campo 1301, C1427APA Buenos Aires: 79 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, EdgeUno, LINKEAR SRL and others
- Pacheco Datacenter EZE1 Argentina Buenos Aires (TELECOM ARGENTINA), Colectora Este 32375, B1618FBB Buenos Aires: 44 networks; carriers ADVANTUN, ANTEL Internacional, Cirion, LINKEAR SRL, Personal Argentina and others
- Cabase COR (Cámara Argentina de Internet (CABASE)), Universidad Nacional de Córdoba, Pabellón Argentina, Haya de la Torre s/n, X5000HUA: 26 networks
- Cabase MZA (Cámara Argentina de Internet (CABASE)), General Paz N° 586, Planta Baja Local 1, M5500 Mendoza: 19 networks
- Datacenter SYT (Servicios y Telecomunicaciones S.A.), Suipacha 128, 1401 Buenos Aires: 19 networks; carriers ANTEL Internacional, Cirion, EdgeUno, Personal Argentina and Servicios y Telecomunicaciones S.A
- Cabase LPL (Cámara Argentina de Internet (CABASE)), CESPI, Calle 50 esq. 115 Piso 3, 1900 La Plata: 16 networks; carriers Metrotel
- Cabase NQN (Cámara Argentina de Internet (CABASE)), Ing. Cipolletti 216, 8300 Neuquén: 16 networks
- Cabase POS (Cámara Argentina de Internet (CABASE)), Campus Universitario de la Universidad Nacional de Misiones, Ruta 12 Km 7 1/2, 3304 Posadas: 12 networks
- Cabase UAQ (Cámara Argentina de Internet (CABASE)), Av. San Martín Oeste 1109, J5400 San Juan: 12 networks
Smart Hands by City
City pages for smart hands in Argentina:
- Buenos Aires: https://www.rebootmonkey.com/en/argentina/buenos-aires/smart-hands/
Smart Hands in Argentina: What We Deliver
Smart hands is the on-site IT support in Argentina data centers for work that calls for judgement. Reboot Monkey engineers are dispatched to the customer's facility and work on the customer's own equipment, with the diagnostic judgement and configuration knowledge that define the service. The work falls into the groups described next.
Rack and stack is installing, mounting and cabling new hardware. Server migration is moving equipment between racks, rooms or facilities. Structured cabling is installing, labelling and patching the cabling between the customer's racks and network equipment. Rack and network design covers the rack layout and the network topology of a new or expanding deployment, and ends with documentation of the design and a controlled handover. Asset inventory is recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
GPU and AI cluster deployment is racking, cabling and node swaps, and it is also offered as a GPU and AI deployment package. Racking and cabling for a cluster follow the same steps as for a single server, repeated across the nodes, and a node swap replaces a node in a cluster that is already installed.
Network work has two parts. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The ordering and the cabling sit with the same company, while the circuits themselves are the operator's and the carriers'.
Several of these services have a prerequisite that the customer supplies or that is arranged first. An inventory is recorded against the customer's asset list, so the list comes from the customer. A cross connect is ordered from the operator or the carrier before the cabling in the rack can be patched. A rack and network design is finished when the documentation and the controlled handover are done, and that handover is the point at which the deployment passes to the customer.
Why Reboot Monkey for Smart Hands in Argentina
Cover for a site is arranged before the first request arrives. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a smart hands request always has a named engineer behind the primary one. The briefing is made for the specific customer site, which is why the backup is named per site and not for the customer as a whole.
Hardware comes from the same operator as the engineers. Reboot Monkey supplies data-centre hardware, servers, network equipment and spare parts. Spares are kept in the customer's rack on request, so a component swap can use stock that is already in the rack. A fibre inspection scope and cleaning kit are available on request for fibre work.
Recurring work has its own arrangement. Remote hands can be agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request. A customer whose smart hands needs come with routine physical tasks can cover both with one provider, and the volume of recurring work is agreed before it starts.
Monitoring is a separate service that sits alongside smart hands. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. A customer that uses both has one operator that monitors the equipment and carries out the hands-on work on it.
Some customers want the infrastructure run for them end to end. IT infrastructure turnkey and run is built for that case: you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.
How Reboot Monkey Works
These terms apply in every facility in Argentina where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Smart Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That is a company-wide figure and does not describe the number of sites in Argentina. What it means for a customer is that a smart hands programme is not limited to one country. A customer with equipment in Australia as well can order the same service through Smart Hands in Australia.
Work that spans several sites is run as multi-site rollouts: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. A customer equipping racks in Argentina and in other countries can therefore plan the installs as one programme.
Smart hands can also be combined with network services. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 leasing covers leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.
Equipment that leaves a site is handled by three related services. Data center decommissioning is the removal and disposal of retired hardware. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. IT asset disposition (ITAD) is data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. ITAD with buyback is the same disposition combined with the buyback of the retired hardware, quoted case by case.
Frequently Asked Questions
Smart Hands vs. Remote Hands | What's the Difference?
Remote hands means physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands means technical work that needs diagnostic judgement and configuration knowledge. The difference is the kind of work: an action the customer has already defined, or a task that requires the engineer to diagnose a problem and configure equipment.
What does smart hands cover in Argentina?
Smart hands in Argentina covers technical work on the customer's equipment that needs diagnostic judgement and configuration knowledge. That includes rack and stack, server migration, structured cabling, rack and network design, GPU and AI cluster deployment, and asset inventory by serial number, asset tag and rack position. Reboot Monkey engineers also install and patch the cabling for cross connects ordered from the facility operator and carriers.
Do you provide on-site IT support in Argentina data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility and carry out the work in person on the customer's own equipment, including installing, cabling, configuring and swapping components. A request starts with a description of the task and the data center where the equipment stands, and Reboot Monkey quotes the work on request.
Do you work in every datacenter in Argentina?
Reboot Monkey engineers work in any facility in Argentina where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Argentina?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with smart hands in Argentina?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Cities we cover in Argentina
Plan Smart Hands in Argentina
Send the task and the data center to Reboot Monkey and receive a quote for the work.