Bosnia and Herzegovina · Sarajevo
Rack and Stack in Sarajevo
Rack and stack in Sarajevo is the installing, mounting and cabling of new hardware in the customer's rack. Reboot Monkey engineers carry out the work in the customer's facility and add labelling and power-on checks.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Sarajevo
1
agreement for every city
Plan your Sarajevo installation
Describe the hardware and the rack, and Reboot Monkey will send a quote for the rack and stack work.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Sarajevo
UTIC/ University of Sarajevo stands on Zmaja od Bosne in Sarajevo. For a company that places hardware in the city, rack and stack is the physical step that turns delivered equipment into installed equipment: installing, mounting and cabling new hardware in the customer's rack.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters.
A buyer in Sarajevo usually has to settle three things before work is scheduled: what is being installed, where it goes, and who connects it to the network. Rack and stack answers the first two. The third is handled in the same engagement, because Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack.
Work on equipment that is already installed belongs to other services. Physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks, are remote hands. Technical work that needs diagnostic judgement and configuration knowledge is smart hands. Naming the job correctly in the first request lets the right engineer be briefed for it.
Datacenter Facilities in Sarajevo
Data centres in Sarajevo, ordered by the number of networks present:
- UTIC/ University of Sarajevo, Zmaja od Bosne 8, objekat 33, 71000 Sarajevo: 2 networks
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. A request begins with the customer's description of the hardware and the rack it is going into. Reboot Monkey engineers then carry out the installation in the customer's facility, and the work ends with the power-on checks on the new equipment.
The scope of a rack and stack job is made up of these parts:
- Installing and mounting new hardware in the customer's rack.
- Cabling the new equipment, including the patching of cables in the rack.
- Labelling, so that the installed equipment and its cables can be identified later.
- Power-on checks once the hardware is installed.
- A fibre inspection scope and cleaning kit, available on request for jobs that involve fibre connections.
Why Reboot Monkey
Reboot Monkey is built around the work inside someone else's building. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. That division is what a procurement manager should expect from any third-party installer.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the installation does not wait for someone to be found and introduced to the site, because a named person already knows the job.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company that installs hardware in Sarajevo and elsewhere, this means the same way of working applies to every site, and one point of contact can coordinate the installations.
Prices are quoted on request and depend on the customer and the size of the job. A rack and stack quote therefore follows from the description of the hardware, the rack and the cabling that the customer supplies.
Rack and stack is often the first step in a longer equipment life cycle. Server migration moves equipment between racks, rooms or facilities. Data center decommissioning removes and disposes of retired hardware. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. Each can be requested separately or after the installation is finished.
How Reboot Monkey Works
These terms apply in every facility in Sarajevo where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Sarajevo?
Rack and stack in Sarajevo covers installing, mounting and cabling new hardware in the customer's rack, together with labelling and power-on checks. Reboot Monkey engineers carry out the work in the customer's facility. Cross connects and carrier circuits are ordered from the facility operator and the carriers present there. Moving existing equipment is server migration, and removing retired hardware is data center decommissioning.
Do you work in every datacenter in Sarajevo?
Reboot Monkey engineers work in any facility in Sarajevo where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Sarajevo?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Sarajevo?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Sarajevo installation
Describe the hardware and the rack, and Reboot Monkey will send a quote for the rack and stack work.