Czech Republic · Prague
Rack and Stack in Prague
Rack and stack in Prague means installing, mounting and cabling new hardware in a colocation rack. Reboot Monkey engineers carry out the work on site, covering cabling, labelling and power-on checks, inside a data centre that another company owns and runs.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Prague
1
agreement for every city
Plan your rack and stack in Prague
Tell us what hardware is arriving and where it goes. Reboot Monkey will quote the job on request.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Prague
CE Colo Prague stands on Nad Elektrarnou in Prague. A buyer who places new servers, switches or storage in a Prague data centre needs the hardware physically installed before it can carry any workload, and that is the work Reboot Monkey takes on. Rack and stack is the installation of new hardware: mounting it in the rack, cabling it and bringing it up. Reboot Monkey is a third-party datacenter services operator. It does not own the building and it is not a hosting company, so the hardware you rack stays yours and the work happens inside a facility run by its operator. The typical request comes from a company that has bought equipment and needs it delivered, installed and connected without sending its own staff abroad or across the country.
- Rack and stack covers installing, mounting and cabling new hardware.
- The work is carried out inside a data centre that another company owns and runs.
- Reboot Monkey sells the services around the hardware, not the building.
Datacenter Facilities in Prague
Data centres in Prague, ordered by the number of networks present:
- CE Colo Prague (CE Colo Czech s.r.o.), Nad Elektrarnou 1428/47, 10600 Prague: 152 networks; carriers 1-IX EU, Arelion, Core-Backbone, Global Network Management, Inter.link and others
- TTC TELEPORT DC1 (TTC Teleport s.r.o.), Tiskarska 10, 10000 Prague: 80 networks; carriers Core-Backbone and RETN
- TTC TELEPORT DC2 (TTC Teleport s.r.o.), Sazecska 10, Prague: 31 networks; carriers Nextremum
- GTS Telehouse Prague (GTS Novera, a.s.), Vinohradská 190, 13000 Prague: 17 networks
- DC Tower Zizkov CRa (Radiokomunikace, a.s.), Mahlerovy sady 1, 130 00 Prague: 16 networks; carriers Arelion
- DC Coolhousing - Prague (Coolhousing s.r.o.), Vinohradská 2405/190, 130 00 Prague: 6 networks
- CE Colo DC7 Prague (CE Colo Czech s.r.o.), K Pérovně 1616/2, 102 00 Prague: 5 networks
- Casablanca INT s.r.o. (ACTIVE 24, s.r.o.), Vinohradská 184, 130 52 Prague: 5 networks
- Shiran Datacenter (FreeTel, s.r.o.), Luzna 716/2, 16000 Prague 6: 5 networks
- GTS Nagano Prague (GTS Novera, a.s.), U nakladoveho nadrazi 3156/6, 13000 Prague: 3 networks
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. In practice a job begins with the equipment in the customer's allocation, and the engineer mounts each unit in the rack position agreed in advance. Power and network cabling follow, and each cable is labelled so that the next engineer, whether from Reboot Monkey or from your own team, can trace it without guessing. Once the hardware is connected, the engineer runs the power-on check and confirms the unit starts.
Network is part of the same job where the customer needs it. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. This keeps one party responsible for the physical path from the rack to the circuit.
A fibre inspection scope and cleaning kit are available on request, which matters when a new link does not come up and the connector end faces need checking before anyone suspects the optics. Quotes are on request, and prices depend on the customer and the size of the job. Rack and stack sits alongside the other physical services Reboot Monkey runs in a facility, so the same engineers can later handle a migration, a swap or a retirement of the same hardware.
- Mounting of new hardware in the agreed rack position.
- Power and network cabling, with every cable labelled.
- Power-on checks once the hardware is connected.
- Cross connect and carrier circuit ordering, with cabling installed and patched in the customer's rack.
- Fibre inspection scope and cleaning kit on request.
Why Reboot Monkey
A rack and stack job depends on who is standing in the room, so continuity matters as much as skill. A second, briefed Reboot Monkey engineer is named as backup for every customer site, which means a missed handover or an unavailable engineer does not leave your install waiting for someone to read the job notes from scratch. Reboot Monkey takes no part in how the building is run; it handles the equipment you place in it. The same approach applies beyond Prague. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a customer with racks in several places can request the same service in each of them rather than finding a separate installer per site. For a CTO, IT director or procurement manager, the practical result is a defined scope, a named backup and a quote on request. You decide what is installed and where, and you receive hardware that is mounted, cabled, labelled and checked for power-on.
How Reboot Monkey Works
These terms apply in every facility in Prague where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Prague?
In Prague, rack and stack covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey engineers carry it out inside a data centre that another company owns and runs, under the facility operator's site rules.
Do you work in every datacenter in Prague?
Reboot Monkey engineers work in any facility in Prague where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Prague?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Prague?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your rack and stack in Prague
Tell us what hardware is arriving and where it goes. Reboot Monkey will quote the job on request.