Czech Republic · Prague
Smart Hands in Prague
Smart hands is technical work inside the data center that needs diagnostic judgement and configuration knowledge, beyond a reboot or a cable check. Reboot Monkey provides on-site IT support in Prague data centers: engineers go to your equipment, work under the facility operator's site rules, and report back to you.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Prague
1
agreement for every city
Request Smart Hands in Prague
Describe the equipment and the task, and Reboot Monkey will quote the work based on the customer and the size of the job.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Prague
CE Colo Prague stands on Nad Elektrarnou in Prague, and it is one of the buildings where customers keep equipment that sometimes needs a trained pair of hands. Smart hands is the service for the moments when a task cannot be reduced to a script. A switch is not passing traffic after a change, a server shows a fault that has to be traced before a part is swapped, or a new device needs to be configured to match what is already running in the rack. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own the building. For a CTO or IT director in Prague, the practical result is a single party that can read a fault, decide what to do, and carry it out in the rack, rather than relaying instructions to a technician who has no context.
Datacenter Facilities in Prague
Data centres in Prague, ordered by the number of networks present:
- CE Colo Prague (CE Colo Czech s.r.o.), Nad Elektrarnou 1428/47, 10600 Prague: 152 networks; carriers 1-IX EU, Arelion, Core-Backbone, Global Network Management, Inter.link and others
- TTC TELEPORT DC1 (TTC Teleport s.r.o.), Tiskarska 10, 10000 Prague: 80 networks; carriers Core-Backbone and RETN
- TTC TELEPORT DC2 (TTC Teleport s.r.o.), Sazecska 10, Prague: 31 networks; carriers Nextremum
- GTS Telehouse Prague (GTS Novera, a.s.), Vinohradská 190, 13000 Prague: 17 networks
- DC Tower Zizkov CRa (Radiokomunikace, a.s.), Mahlerovy sady 1, 130 00 Prague: 16 networks; carriers Arelion
- DC Coolhousing - Prague (Coolhousing s.r.o.), Vinohradská 2405/190, 130 00 Prague: 6 networks
- CE Colo DC7 Prague (CE Colo Czech s.r.o.), K Pérovně 1616/2, 102 00 Prague: 5 networks
- Casablanca INT s.r.o. (ACTIVE 24, s.r.o.), Vinohradská 184, 130 52 Prague: 5 networks
- Shiran Datacenter (FreeTel, s.r.o.), Luzna 716/2, 16000 Prague 6: 5 networks
- GTS Nagano Prague (GTS Novera, a.s.), U nakladoveho nadrazi 3156/6, 13000 Prague: 3 networks
Our Smart Hands Services
Smart hands sits next to the other physical services Reboot Monkey runs, and the line between them is the amount of judgement the task needs. Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, so the engineer works out what is wrong, not only what to touch. Where the job is larger, it moves into rack and stack (installing, mounting and cabling new hardware) or server migration (moving equipment between racks, rooms or facilities). A request is handled in a fixed order. You send the task and the location. A Reboot Monkey engineer is assigned and briefed, and a second, briefed engineer is named as backup for every customer site. The engineer carries out the work in your rack, and you receive confirmation of what was done. Connectivity work follows the same pattern: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack. Fibre links are a frequent source of faults that look like something else, so a fibre inspection scope and cleaning kit are available on request. For equipment you want watched between visits, hardware monitoring means the Reboot Monkey NOC monitors your servers and network equipment. Prices are quoted on request and depend on the customer and the size of the job.
- Diagnosing faults and acting on the result in the rack
- Configuration work that needs knowledge of your environment
- Cabling, patching and cross connect installation for ordered circuits
- Fibre inspection and cleaning on request
- A named backup engineer for every customer site
Why Reboot Monkey
Reboot Monkey works across a wide footprint. As of 2026, its field engineers work in 190 countries and more than 400 locations. For a company with equipment in more than one place, that means the same process in Prague as in any other site, handled by one provider. The model is vendor-neutral and built around your equipment, wherever it sits, because Reboot Monkey does not sell its own hosting and does not own the facility. Engineers are dispatched to your facility and work in it; the work is reported back to you in the same way each time, so procurement and operations teams can rely on a consistent record of what was done. Because the building belongs to someone else, Reboot Monkey does not take decisions that belong to the operator, and it does not carry out power or cooling work on the operator's behalf. What it does control is the quality of the engineering inside your own racks: the diagnosis, the configuration, the cabling and the follow-up. If you want to scope a recurring arrangement or a single intervention, describe the equipment and the task, and the quote reflects the customer and the size of the job.
How Reboot Monkey Works
These terms apply in every facility in Prague where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Prague?
Smart hands covers technical work in the data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers trace faults, configure or reconfigure equipment, and install and patch cabling in your rack. Simpler physical tasks such as reboots and component swaps fall under remote hands. The facility operator keeps responsibility for power, cooling and access.
Do you provide on-site IT support in Prague data centers?
Yes. A request is assigned to a briefed engineer, a second briefed engineer is named as backup for every customer site, and you receive confirmation of the work done. Prices are quoted on request.
Do you work in every datacenter in Prague?
Reboot Monkey engineers work in any facility in Prague where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Prague?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Prague?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Request Smart Hands in Prague
Describe the equipment and the task, and Reboot Monkey will quote the work based on the customer and the size of the job.