Skip to content

Czech Republic · Prague

Remote Hands in Prague

Reboot Monkey provides remote hands in Prague: physical tasks carried out on your instruction inside the data centre, such as reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers deliver on-site IT support in Prague data centers, so your team does not need to travel to the rack.

Remote Hands

  • 8

    services detailed for Prague

  • 1

    agreement for every city

Request remote hands in Prague

Tell us the rack, the device and the task. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Prague

CE Colo Prague stands on Nad Elektrarnou in Prague. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a Prague deployment this means the equipment in your rack stays yours, and Reboot Monkey supplies the hands that work on it. Remote hands is the service for physical tasks that you specify and Reboot Monkey carries out. You describe what is needed and which rack it concerns, and a Reboot Monkey engineer performs it in the facility. The tasks are physical by definition: a reboot, a cable check, a component swap, a visual check of an indicator or a port. Technical work that needs diagnostic judgement and configuration knowledge belongs to smart hands, which is a separate service, so the boundary between the two is clear before any work begins.

Datacenter Facilities in Prague

Data centres in Prague, ordered by the number of networks present:

  • CE Colo Prague (CE Colo Czech s.r.o.), Nad Elektrarnou 1428/47, 10600 Prague: 152 networks; carriers 1-IX EU, Arelion, Core-Backbone, Global Network Management, Inter.link and others
  • TTC TELEPORT DC1 (TTC Teleport s.r.o.), Tiskarska 10, 10000 Prague: 80 networks; carriers Core-Backbone and RETN
  • TTC TELEPORT DC2 (TTC Teleport s.r.o.), Sazecska 10, Prague: 31 networks; carriers Nextremum
  • GTS Telehouse Prague (GTS Novera, a.s.), Vinohradská 190, 13000 Prague: 17 networks
  • DC Tower Zizkov CRa (Radiokomunikace, a.s.), Mahlerovy sady 1, 130 00 Prague: 16 networks; carriers Arelion
  • DC Coolhousing - Prague (Coolhousing s.r.o.), Vinohradská 2405/190, 130 00 Prague: 6 networks
  • CE Colo DC7 Prague (CE Colo Czech s.r.o.), K Pérovně 1616/2, 102 00 Prague: 5 networks
  • Casablanca INT s.r.o. (ACTIVE 24, s.r.o.), Vinohradská 184, 130 52 Prague: 5 networks
  • Shiran Datacenter (FreeTel, s.r.o.), Luzna 716/2, 16000 Prague 6: 5 networks
  • GTS Nagano Prague (GTS Novera, a.s.), U nakladoveho nadrazi 3156/6, 13000 Prague: 3 networks

Our Remote Hands Services

A remote hands request in Prague follows a fixed sequence. You send the instruction, naming the rack, the device and the action required. A Reboot Monkey engineer attends the site, carries out the task as written and reports back on the result. If the task turns out to need configuration or fault diagnosis beyond what was instructed, that work is scoped as smart hands rather than improvised during a remote hands visit.

The work covers the tasks below, always on your instruction:

  • Reboots and power cycling of servers and network devices through the hardware itself
  • Cable checks, including tracing and confirming that connections sit in the ports you name
  • Component swaps, where you supply the part and specify the slot
  • Visual checks of status lights, displays and port conditions, reported back to you
  • Patching in the customer's rack, with Reboot Monkey engineers installing and patching the cabling

Why Reboot Monkey

Cross connects and carrier circuits are part of the same arrangement. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and its engineers then install and patch the cabling in your rack. One supplier handles the order and the physical work, so you do not coordinate separate parties for the circuit and for the patching.

Continuity of cover is built into how a site is staffed. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single engineer's absence does not leave your rack without someone who already knows the environment. For fibre faults, a fibre inspection scope and cleaning kit are available on request.

Reboot Monkey works at scale across many facilities. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Prices are quoted on request and depend on the customer and the size of the job, so each Prague quote reflects your actual requirement.

How Reboot Monkey Works

These terms apply in every facility in Prague where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Prague?

Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task in the Prague data centre and reports the result. Work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service, and installing and cabling new hardware is rack and stack.

Do you provide on-site IT support in Prague data centers?

Yes. Reboot Monkey engineers carry out on-site IT support in Prague data centers: you send an instruction naming the rack, the device and the action, and an engineer performs it in the facility under the operator's site rules. A second, briefed engineer is named as backup for every customer site. Prices are quoted on request.

Do you work in every datacenter in Prague?

Reboot Monkey engineers work in any facility in Prague where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Prague?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Prague?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request remote hands in Prague

Tell us the rack, the device and the task. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote