Skip to content

Equatorial Guinea · Malabo

Rack and Stack in Malabo

Rack and stack in Malabo means installing, mounting and cabling new hardware in the customer's rack. Reboot Monkey engineers carry out the work inside the data centre, including cabling, labelling and power-on checks.

In Rack and Stack

Rack and Stack

  • 7

    services detailed for Malabo

  • 1

    agreement for every city

Plan your rack and stack in Malabo

Send the hardware list and the target racks. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Malabo

SIPOPO DATACENTER stands on Sipopo in Malabo. For a company placing new servers, switches or storage in a Malabo data centre, rack and stack is the physical step that turns delivered hardware into equipment ready for configuration: installing, mounting and cabling new hardware in the customer's rack.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters. For a rack and stack job in Malabo, one supplier can therefore cover the hardware, the network and the installation work.

The network side follows the same path. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Engineers are dispatched to the customer's facility to carry out the installation.

Three questions shape a rack and stack request: which hardware is being installed, which cabling it needs, and which network it connects to. Answering them in the request lets the quote reflect the real size of the job.

Datacenter Facilities in Malabo

Data centres in Malabo, ordered by the number of networks present:

  • SIPOPO DATACENTER (Gestor de Infraestructuras de Telecomunicaciones de Guinea Ecuatorial), Sipopo, 00001 Malabo: 1 network

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. Quotes are on request. Prices are quoted on request and depend on the customer and the size of the job, so each Malabo installation is scoped individually before work starts.

When a link needs inspection, a fibre inspection scope and cleaning kit are available on request. The same engineers who patch the cabling can use them during the installation.

Rack and stack is one of several services that Reboot Monkey delivers inside customer racks. The neighbouring services are defined as follows:

  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey works inside data centres that other companies own and run. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A rack and stack plan for Malabo is written around that division of responsibility.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer cannot attend, the named backup already knows the site and the job.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer that installs hardware in Malabo and elsewhere can use the same supplier and the same way of working for each installation.

After the hardware is racked, the customer can move to related work with the same supplier: hardware monitoring by the Reboot Monkey NOC, remote hands for later physical tasks, or smart hands where diagnostic judgement is needed. The rack and stack request is the entry point, and the quote covers the scope the customer actually needs.

How Reboot Monkey Works

These terms apply in every facility in Malabo where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Malabo?

Rack and stack covers installing, mounting and cabling new hardware in the customer's rack in Malabo. The work includes cabling, labelling and power-on checks. Reboot Monkey engineers install and patch the cabling, and the cross connects and carrier circuits are ordered from the facility operator and the carriers present. Quotes are on request.

Do you work in every datacenter in Malabo?

Reboot Monkey engineers work in any facility in Malabo where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Malabo?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Malabo?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in Malabo

Send the hardware list and the target racks. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote