Skip to content

Guinea · Conakry

Remote Hands in Conakry

Reboot Monkey provides remote hands and on-site IT support in Conakry data centers: engineers are dispatched to the customer's facility to carry out reboots, cable checks, component swaps and visual checks on the customer's instruction. The customer's equipment stays in a data centre that another company owns and runs.

Remote Hands

  • 8

    services detailed for Conakry

  • 1

    agreement for every city

Request Remote Hands in Conakry

Describe the facility, the equipment and the task, and Reboot Monkey will quote the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Conakry

GUILAB Datacenter stands on Centre Emetteur de Kipé in Conakry. For a company with equipment in a Conakry data centre, remote hands means physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what is done, and Reboot Monkey engineers are dispatched to the customer's facility to do it.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The work is limited to the customer's own equipment in the customer's own rack space.

A request is easiest to carry out when it names the rack, the device and the action wanted, for example a reboot of one server or a visual check of one switch. A component swap follows the same pattern: the customer gives the instruction, and the engineer carries out the swap in the customer's rack. Where a task needs diagnostic judgement or configuration knowledge, it is smart hands rather than remote hands, and it is scoped on that basis. For cable checks, a fibre inspection scope and cleaning kit are available on request.

Datacenter Facilities in Conakry

Data centres in Conakry, ordered by the number of networks present:

  • GUILAB Datacenter, Centre Emetteur de Kipé, 1809 Conakry: 5 networks

Our Remote Hands Services

Remote hands is the entry point to a wider set of on-site services that Reboot Monkey runs for customers with equipment in Conakry. Each one is defined by the work it covers:

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A new circuit and the patching in the rack therefore come from the same company.

  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a datacenter. Remote hands work is therefore defined by the customer's instruction and the customer's equipment, not by a hosting product.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the customer has a named second contact for the work.

Prices are quoted on request and depend on the customer and the size of the job. To request a quote, describe the facility, the equipment, the task you need carried out and any deadline, so that the quote reflects the size of the job.

How Reboot Monkey Works

These terms apply in every facility in Conakry where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Conakry?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility to carry them out. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack.

Do you provide on-site IT support in Conakry data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility to carry out the work the customer instructs: reboots and cable checks, installing and cabling new hardware, moving equipment between racks, and technical work that needs diagnostic judgement and configuration knowledge. Where hardware monitoring is ordered, the Reboot Monkey NOC monitors the customer's servers and network equipment.

Do you work in every datacenter in Conakry?

Reboot Monkey engineers work in any facility in Conakry where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Conakry?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Conakry?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Conakry

Describe the facility, the equipment and the task, and Reboot Monkey will quote the job.

Published:

Get a quote