Skip to content
Map of Romania: data centres as dots, the larger cities circled

Map: Natural Earth

ITAD

ITAD in Romania: IT Asset Disposition for Retired Business Hardware

ITAD in Romania is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing.

  • 8

    of our services in Romania

In depth

ITAD: 9 sections, open any to read more.

ITAD in Romania: How It Works

IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. For a business in Romania, this is the work that follows when servers, network equipment and storage are retired, replaced or consolidated.

Reboot Monkey is a third-party datacenter services operator, and ITAD is one of the physical services its engineers deliver. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. The processing is carried out by Reboot Monkey staff, either in a partner's processing facility or on the customer's site.

A request for ITAD in Romania starts with three decisions that belong to the customer. The first is which equipment is being retired and where it stands. The second is whether the storage media should be wiped or destroyed physically. The third is whether any of the equipment should go to resale or buyback. Reboot Monkey takes the request on those terms.

The size of a request ranges from a few retired servers to the hardware of a whole data centre exit. Resale and buyback are quoted case by case, so each job is assessed on the equipment it contains.

The customer's own team remains the owner of the decisions. Reboot Monkey carries out the collection, the transport, the wiping or destruction of storage media and the resale or buyback handling that the customer instructs. The instruction is given once, in the request, and the work follows it.

E-waste Rules in Romania

In Romania, electronic waste falls under the Ordonanţa de urgenţă nr.5/2015 privind deşeurile de echipamente electrice şi electronice, an emergency ordinance on waste electrical and electronic equipment. For an IT director or a procurement manager in Romania, it is the Romanian reference for electronic waste when a refresh, a consolidation or a decommissioning produces retired equipment.

Where the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey's part of the job is the equipment itself: collecting it, transporting it and processing it.

Each retired item leaves by one of two routes. Equipment that can be used again goes to resale or buyback, quoted case by case. Storage media goes to data wiping or to physical destruction, and on the customer's site that destruction is shredding or degaussing. The customer states the route when the request is made, and Reboot Monkey carries it out.

Where the retirement covers equipment in a data center, asset inventory is the Reboot Monkey service that records the customer's equipment by serial number, asset tag and rack position, against the customer's asset list. The record gives the collection a list to match, item by item.

The ordinance names electrical and electronic equipment as its subject, and a data centre refresh produces that kind of equipment: racked servers, switches and storage arrays whose useful life has ended or that the customer has replaced. Equipment that can be used again travels in the same collection as equipment that is to be destroyed, and the customer's request says which is which.

Personal Data on Retired Drives in Romania

In Romania, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the National Supervisory Authority for Personal Data Processing.

A retired server or storage array can still hold personal data on its drives after the service that used it has been switched off. For ITAD, this makes the treatment of the storage media the decision that has to be taken before anything is collected. For drives that have to leave a data centre, the collection step comes first and the choice of treatment is already in the request.

The ITAD definition names two treatments, data wiping and physical destruction, and the customer chooses between them for each request. A request that covers several kinds of equipment can name the treatment for each kind. On the customer's site, storage media can be destroyed physically by shredding or degaussing.

The location of the work is the practical difference for a customer with personal data on its drives. On-site destruction takes place where the drives stand, on the customer's premises. Processing in a partner's processing facility follows a collection and a transport step, and it is carried out there by Reboot Monkey staff. The request states which of the two the customer wants, and the quote follows that instruction.

Reboot Monkey's role in this part of the job is physical. It wipes or destroys the storage media that the customer names, and it collects and transports the hardware that goes for processing. The customer knows which systems held personal data, and the request is where that knowledge reaches Reboot Monkey.

How Collection and Destruction Work

ITAD at Reboot Monkey is made of four physical components, and a request names the ones it needs: collection and transport, data wiping, shredding or degaussing on the customer's site, and resale or buyback.

Collection covers the retired hardware the customer has designated. It moves that hardware from where it stands to where it is processed, and it ends there. The installation of replacement equipment is a separate service: rack and stack covers installing, mounting and cabling new hardware, and server migration covers moving equipment between racks, rooms or facilities. A customer replacing hardware orders those services next to ITAD.

Processing takes place in one of two settings. In a partner's processing facility, Reboot Monkey staff carry out the work after transport. On the customer's site, Reboot Monkey staff carry out the work where the hardware stands, and for storage media that work can include physical destruction by shredding or degaussing.

Resale and buyback apply only to the equipment that can be used again. ITAD with buyback is the form of the service in which the retired hardware is bought back, and it is quoted case by case. A customer that wants a buyback quote says so in the request, together with the equipment list, so that the quote addresses the equipment in the job.

When the retired hardware comes out of a data centre as part of a larger project, data center decommissioning covers removing and disposing of retired hardware. The collection, wiping, destruction and buyback steps of ITAD then apply to the hardware that is removed.

IT Asset Disposition Process Flow

A job for ITAD in Romania follows one sequence whatever its size, and each step has a defined hand-off between the customer and Reboot Monkey. The steps run in this order.

In this sequence, the request and the resale or buyback choice are decisions made by the customer. Collection, transport and processing are carried out by Reboot Monkey. Because the treatment is stated in the request, the work that follows has a defined instruction at every step. A small job and a large job pass through the same steps; what differs is the number of items collected and the size of the quote.

  • Request: the customer sends the equipment to be retired, the place where it stands, which is either the customer's site or a data centre, and the treatment wanted for the storage media.
  • Resale or buyback: the customer says whether any equipment should be offered for resale or buyback, which Reboot Monkey quotes case by case.
  • Quote: prices are quoted on request and depend on the customer and the size of the job.
  • Site cover: a second, briefed Reboot Monkey engineer is named as backup for every customer site.
  • Collection: Reboot Monkey collects the retired hardware at the customer's site or data centre.
  • Transport: the hardware is transported for processing.
  • Processing: Reboot Monkey staff carry out the data wiping or the physical destruction, in a partner's processing facility or on the customer's site.
  • Outcome: equipment that can be used again goes to resale or buyback, and the job closes when the hardware has been processed as the request instructed.

Why Reboot Monkey for ITAD in Romania

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.

For a customer retiring hardware, the relevant point is that the neighbouring steps of the hardware cycle are services Reboot Monkey offers as well. Retirement is rarely the only job in that cycle, and a customer can order the steps on either side of ITAD from the same operator. Where the retirement is followed by a new deployment, IT infrastructure turnkey and run is the service in which Reboot Monkey buys, installs, configures and then runs the infrastructure for the customer, inside the data center the customer chooses.

  • Before retirement: server migration, which moves equipment between racks, rooms or facilities, and asset inventory, which records the customer's equipment against its asset list.
  • At retirement: ITAD, with resale or buyback quoted case by case, and data center decommissioning for hardware that is removed from a data centre.
  • After retirement: hardware supply and spares, which covers data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request, and rack and stack for installing, mounting and cabling the new hardware.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Romania.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

IT Asset Disposition (ITAD) in Other Countries

Retired hardware does not always stand in one country. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

The definition of the service stays the same from one country to the next, while the local legal references change. In Romania they are the ordinance on waste electrical and electronic equipment and the General Data Protection Regulation, overseen by the National Supervisory Authority for Personal Data Processing.

For a customer whose retired hardware stands in Saudi Arabia, the next step is IT Asset Disposition (ITAD) in Saudi Arabia.

A request that covers hardware in more than one country lists each location separately. For every location it gives the equipment standing there, whether that equipment is on a customer site or in a data centre, the treatment wanted for its storage media, and any equipment to be offered for resale or buyback. Each location is then handled as its own collection: Reboot Monkey collects the retired hardware where it stands and transports it for processing, and the processing is carried out by Reboot Monkey staff in a partner's processing facility or on the customer's site.

Where the retirement is part of moving a customer's equipment to a new location, datacenter exit and relocation is the related service. It combines the physical move of the equipment with the removal and disposal of the hardware that is retired, and the ITAD steps apply to that retired hardware.

Frequently Asked Questions

What does IT asset disposition cover in Romania?

In Romania, IT asset disposition covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre, and on the customer's site storage media can be destroyed by shredding or degaussing.

Where does Reboot Monkey process retired hardware in Romania?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Romania?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Romania?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Request ITAD in Romania

Tell Reboot Monkey which hardware is retired, where it stands and whether the storage media is to be wiped or destroyed. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote