Skip to content
Map of Romania: data centres as dots, the larger cities circled

Map: Natural Earth

Rack and Stack

Server Racking in Romania

Server racking in Romania is the installation, mounting and cabling of new hardware in the customer's racks. Reboot Monkey engineers are dispatched to the customer's facility to carry out cabling, labelling and power-on checks, with the scope agreed before work starts and quotes on request.

  • 8

    of our services in Romania

Choose your city

Services in Rack and Stack

In depth

Rack and Stack: 8 sections, open any to read more.

Server Racking in Romania: How It Works

Rack and stack is the installation of new hardware in a data center: installing, mounting and cabling it in the customer's racks. For a business in Romania it is the step between the arrival of servers and network equipment and the point where that equipment is ready to be configured and put into service. The work applies to a new deployment, to an expansion of an existing one and to hardware delivered for installation. Reboot Monkey engineers are dispatched to the customer's facility, so the work is carried out inside the data center where the equipment will run. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Rack and stack ends with equipment that is mounted, cabled, labelled and checked at power-on. The outcome can be checked against the request rack by rack: what was mounted, how it is cabled, how it is labelled and whether it powers on. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and it can be requested alongside an installation or after it. Physical tasks that follow go-live, such as reboots, cable checks, component swaps and visual checks, are remote hands and are carried out on the customer's instruction. Rack and stack is also separate from server migration, which moves existing equipment between racks, rooms or facilities.

A request for server racking in Romania moves through these steps:

  • The customer states what is to be installed, at which site and in which rack positions. Prices are quoted on request and depend on the customer and the size of the job.
  • The scope is agreed before work starts. Rack and stack work covers cabling, labelling and power-on checks.
  • An engineer is assigned to the customer's site, and a second, briefed Reboot Monkey engineer is named as backup for every customer site.
  • On site, the engineer mounts the hardware in the racks and cables it. Where the equipment needs a cross connect or a carrier circuit, Reboot Monkey orders it from the facility operator and the carriers present in the facility, and the engineer installs and patches the cabling in the customer's rack.
  • Labelling and power-on checks complete the installation, and the job is closed with the equipment cabled and labelled in the customer's rack.

Datacenter Landscape in Romania

Data centres in Romania, ordered by the number of networks present:

  • NXDATA-1 Bucharest (BUH1), 8 Bulevardul Dimitrie Pompeiu, Feper Building, 020337 Bucharest: 117 networks; carriers Arelion, Bitway Telecom, CFH CABLE INC, Fiber 23, FiberX Romania and others
  • NXDATA-2 Bucharest (BUH2), 6-A Bulevardul Dimitrie Pompeiu, UpGround Complex, BOB Building, 020337 Bucharest: 83 networks; carriers Arelion, Bitway Telecom, CFH CABLE INC, Inter.link, Netrouting and others
  • Voxility IR1 Bucharest, Dimitrie Pompei 9-9A, Building 24, 020335 Bucharest: 25 networks; carriers Bitway Telecom, CFH CABLE INC, Netrouting and ZET.NET Backbone
  • M247 Europe Bucharest (M247 Ltd), Sos. Fabrica de Glucoza, Nr 11B, etaj 1, Sector 2, Bucharest: 18 networks; carriers Bitway Telecom
  • iNES Datacenter Bucharest (iNES Group), Virgil Madgearu 2-6, Sector 1, Bucharest: 17 networks; carriers Bitway Telecom
  • Gemenii Network GT Datacenter (Phoenix Telecom & Media Services SRL), Bulevardul Ghica Tei 137, sectorul 2, 023705 Bucharest: 5 networks; carriers Bitway Telecom
  • Gemenii Network TD Datacenter (Phoenix Telecom & Media Services SRL), Strada Teiul Doamnei 1, sectorul 2, 023571 Bucharest: 5 networks; carriers Bitway Telecom
  • Radiocom (Societatea Naţională de Radiocomunicaţii S.A.), Șos. Olteniței nr. 103, 041303 Bucharest: 5 networks; carriers Bitway Telecom
  • Teletrans Datacenter, Hristo-Botev 16-18, Sector 3, RO-030236 Bucharest: 5 networks
  • CobraNET Arad (CobraNET SRL), Arad,Str 6.Vanatori nr 51, 000000: 3 networks

Rack and Stack by City

City pages for rack and stack in Romania:

  • Bucharest: https://www.rebootmonkey.com/en/romania/bucharest/rack-and-stack/

Server Racking in Romania: What We Deliver

A racking request can include more than mounting a server. Several services sit around an installation, and each is defined by the work Reboot Monkey engineers carry out. They can be requested together as one job or one at a time, and a new deployment can run through them in the order below.

At the centre is rack and stack itself: installing, mounting and cabling new hardware, with labelling and power-on checks.

Design comes first when the layout is not yet settled. Rack and network design fixes the rack layout and the network topology of a new or expanding deployment, and it ends with documentation of the design and a controlled handover to the customer.

Hardware supply and racking follow. Reboot Monkey supplies data-centre hardware, servers, network equipment and spare parts, and Reboot Monkey engineers install and cable the equipment. Spares are kept in the customer's rack on request.

Structured cabling covers the cabling between the customer's racks and network equipment: Reboot Monkey engineers install, label and patch it. Where the cabling includes fibre, a fibre inspection scope and cleaning kit are available on request.

The inventory closes the job. Asset inventory records the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. It can be requested after an installation, or for equipment already in the room.

GPU and AI clusters follow the same pattern. Reboot Monkey engineers rack and cable the nodes and carry out node swaps when a node has to be replaced, and the GPU and AI deployment package bundles this racking, cabling and node swap work for a cluster.

Network capacity for the new racks is requested separately from the installation. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs, so the transit quote follows the facility where the racks are installed.

Why Reboot Monkey for Server Racking in Romania

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and not a datacenter owner: the customer's servers run in a data center the customer selects, and Reboot Monkey supplies the services around them.

For a buyer in Romania this means the hardware, the network connection and the installation are requested from the same company. The engineer who mounts a server works for the same company that orders the connection it will use.

Each service has its own scope, so a racking job is not extended into configuration, monitoring or disposal unless the customer requests it. Once the equipment is running, further services can be added as the need arises. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. Remote hands can be agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request.

Network needs beyond transit are handled in the same way. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement, and dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.

Some customers prefer not to buy and install the equipment themselves. Under IT infrastructure turnkey and run, the customer or its investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it inside the data center the customer chooses.

At the end of the hardware's life, data center decommissioning covers removing and disposing of retired hardware. IT asset disposition with buyback adds the buyback of the retired hardware, quoted case by case. Both are requested separately from the installation and sit at the other end of the same equipment lifecycle.

How Reboot Monkey Works

These terms apply in every facility in Romania where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Countries

Rack and stack is available well beyond one country. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a rollout that continues in another country, see Rack and Stack in Saudi Arabia.

Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. Each location in the programme is treated as a customer facility in its own right: an engineer is dispatched to it, the scope is cabling, labelling and power-on checks, and the work is done in the customer's racks. Whatever the country, the request is stated the same way: the hardware, the sites and the services wanted around them.

Server migration is moving equipment between racks, rooms or facilities. It applies to equipment that is already in use, while rack and stack applies to new hardware, so a programme that touches both kinds of equipment is requested as two pieces of work with one set of sites.

Datacenter exit and relocation is the physical move of the customer's equipment to its new location, together with the removal and disposal of the hardware that is retired. At the new location, rack and stack applies to any new hardware that arrives, and structured cabling applies to the patching between the customer's racks and network equipment. A move therefore combines removal at the old location, the transport of the equipment and installation at the new one, and each part has its own scope.

A request for work in more than one country is made the same way as one for Romania. The customer names the hardware, the sites and the services, the scope is agreed before work starts, and the quote is prepared on request.

Frequently Asked Questions

What does rack and stack cover in Romania?

Rack and stack covers installing, mounting and cabling new hardware in the customer's racks, with labelling and power-on checks. Reboot Monkey engineers are dispatched to the customer's facility in Romania to carry out the work. Quotes are on request, and prices depend on the customer and the size of the job. Structured cabling or GPU and AI cluster racking can be requested alongside it.

Do you work in every datacenter in Romania?

Reboot Monkey engineers work in any facility in Romania where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Romania?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with rack and stack in Romania?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a Server Racking Quote

State the hardware, the site and the rack positions, and Reboot Monkey prepares a quote for the job.

Published:

Get a quote