Skip to content
Map of Saudi Arabia: data centres as dots

Map: Natural Earth

Remote Hands

Data Center Remote Hands in Saudi Arabia

Data center remote hands in Saudi Arabia means physical tasks carried out at the customer's rack on instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey provides on-site IT support in Saudi Arabia data centers, from a single reboot to cabling work, inside buildings that other companies own and run.

  • 9

    of our services in Saudi Arabia

Choose your city

In depth

Remote Hands: 8 sections, open any to read more.

Data Center Remote Hands in Saudi Arabia: How It Works

Remote hands is the set of physical tasks carried out in a data center on the customer's instruction: reboots, cable checks, component swaps and visual checks. For organisations that run servers and network equipment in Saudi Arabia, the practical question is who stands at the rack when something needs a hand and the customer's own staff are elsewhere. Reboot Monkey engineers are dispatched to the data center where the customer's equipment sits, and the work is delivered inside a building that another company owns and runs.

A request starts with the customer stating the task, the equipment it concerns and where that equipment sits. The engineer carries out that task and nothing wider, so the instruction defines the work. If a job turns out to need diagnostic judgement and configuration knowledge, it is smart hands rather than remote hands, and it is ordered as that service. Keeping the two apart tells a buyer from the first message whether a ticket is a physical task or a technical one.

Remote hands tasks include the following:

Each request is a bounded piece of work. The customer names the equipment and the action, the engineer carries it out, and the customer receives the outcome of that instruction. The customer decides what is done and the engineer does it, so control of the systems stays with the customer. Work that spans several devices, several racks or a new installation is a different job: rack and stack covers new hardware, and server migration covers moves between racks, rooms or facilities. Ordering the job under the service that matches it keeps the scope of each request clear.

For a procurement manager or an IT director, the useful distinction is between a recurring need for hands at the rack and a one-off project. Remote hands suits the first. The second is better ordered as a project with its own scope, so that the work and what it covers are agreed before an engineer goes to the data center.

  • Reboots of servers and network equipment on the customer's instruction
  • Cable checks at the rack, including the patch cabling between devices
  • Component swaps inside customer equipment
  • Visual checks of equipment in the rack

Datacenter Landscape in Saudi Arabia

Data centres in Saudi Arabia, ordered by the number of networks present:

  • center3 JED2 - Jeddah: 16 networks
  • KACST Building 44 (King Abdul Aziz City for Science and Technology), King Abdullah Branch Rd, Al Raed, 12354 Riyadh: 8 networks
  • center3 RUH4 - Riyadh: 8 networks
  • center3 RUH1 - Riyadh: 6 networks
  • Mobily JED1 DC (Etihad Etisalat (Mobily)), Abhur Al Janubiyah District, 22233 Jeddah: 4 networks
  • center3 JED1 - Jeddah: 4 networks
  • center3 DMM2 - Dammam: 3 networks
  • center3 RUH3 - Riyadh: 3 networks
  • Nournet Nahdah Data Centre (Nour Internet Company for Communications and Information Technology Ltd.), Ibn Alhaitham St., 13222 Riyadh: 2 networks
  • center3 DMM1 - Dammam: 2 networks

Remote Hands by City

City pages for remote hands in Saudi Arabia:

  • Riyadh: https://www.rebootmonkey.com/en/saudi-arabia/riyadh/remote-hands/

Data Center Remote Hands in Saudi Arabia: What We Deliver

Remote hands is one of 7 services Reboot Monkey delivers inside data centers that other companies own and run. The other six cover the rest of a hardware lifecycle, from installation to disposal, and a customer can order any of them alongside remote hands:

Read in lifecycle order, the services line up as follows. Rack and stack puts new hardware into the rack and cables it. Hardware monitoring has the Reboot Monkey NOC watch the customer's servers and network equipment once they are running. Remote hands and smart hands answer when equipment needs attention at the rack. Server migration relocates equipment, and decommissioning together with IT asset disposition retires it.

Hardware monitoring is operated by the Reboot Monkey NOC rather than by engineers at the rack, so it complements remote hands. The NOC watches the equipment, and a task that needs a physical action at the rack is a remote hands task.

Network connectivity sits alongside these services. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Cable work in the rack is therefore done by Reboot Monkey engineers, while the circuits and cross connects themselves come from the operator and the carriers.

Where a link needs fibre inspection, a fibre inspection scope and cleaning kit are available on request. Mention the need when the request is raised, so that the tools are part of the job from the start.

  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge
  • Rack and stack: installing, mounting and cabling new hardware
  • Server migration: moving equipment between racks, rooms or facilities
  • Data center decommissioning: removing and disposing of retired hardware
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC

Why Reboot Monkey for Data Center Remote Hands in Saudi Arabia

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.

That position shapes how remote hands works. The customer's equipment stays in the data center the customer has chosen. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Because Reboot Monkey also sells the rack space, IP transit, leased IP addresses and network, a customer who buys remote hands from Reboot Monkey can buy the infrastructure around it from the same supplier. Ordering and support for a deployment then run through one supplier rather than several.

Continuity is handled by naming a backup. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a site always has a second named engineer who has been briefed on it.

Prices are quoted on request and depend on the customer and the size of the job. To get a useful quote, a buyer should describe the equipment and the size of the job. A request moves from first contact to finished work in four steps:

  • The customer describes the site, the equipment and the task to be carried out.
  • Reboot Monkey quotes the work against the customer and the size of the job.
  • A Reboot Monkey engineer is dispatched to the data center where the equipment sits.
  • The engineer carries out the task on the customer's instruction, and anything that needs diagnostic judgement is taken up as smart hands.

How Reboot Monkey Works

These terms apply in every facility in Saudi Arabia where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Remote Hands in Other Countries

Remote hands is delivered by Reboot Monkey field engineers, and the same model applies outside Saudi Arabia. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

For equipment that is split between Saudi Arabia and Singapore, the Singapore side can be ordered through Remote Hands in Singapore, so that both sites are handled in the same way.

A customer with equipment in several countries gives each request the same three elements: the site, the equipment and the task. Remote hands is defined by the customer's instruction, so a reboot, a cable check, a component swap or a visual check is the same piece of work whichever country it is requested in. The named backup engineer applies to every customer site, so a customer with sites in more than one country has a second briefed engineer named for each of them.

When the need is a planned change rather than a single task, the matching service is requested in the same way as remote hands. A customer states the site, the equipment and the outcome wanted. Server migration covers the movement of equipment between racks, rooms or facilities. Rack and stack covers the installation, mounting and cabling of new hardware. Data center decommissioning covers the removal and disposal of retired hardware, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.

In each case the building belongs to the operator, and the customer's own equipment is the subject of the work. A multi-country customer can therefore plan routine tasks as remote hands requests, plan moves and installations as projects, and keep both under one description of what each service covers. For a CTO or a procurement manager comparing suppliers across several countries, that consistency means the definition of a service does not change from one site to the next.

Frequently Asked Questions

What does remote hands cover in Saudi Arabia?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the data center to carry them out. Work that needs diagnostic judgement and configuration knowledge is ordered as smart hands, and installing, mounting and cabling new hardware is ordered as rack and stack.

Do you provide on-site IT support in Saudi Arabia data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's data center to work on equipment at the rack on the customer's instruction. The request names the equipment and the task, and an engineer carries it out. Jobs that need diagnostic judgement are handled as smart hands, and the Reboot Monkey NOC can monitor the customer's servers and network equipment as a separate service.

Do you work in every datacenter in Saudi Arabia?

Reboot Monkey engineers work in any facility in Saudi Arabia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Saudi Arabia?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Saudi Arabia?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Data Center Remote Hands in Saudi Arabia

Describe the equipment and the task, and Reboot Monkey will quote the job.

Published:

Get a quote