Map: Natural Earth
Rack and Stack
Server Racking in Saudi Arabia
Server racking in Saudi Arabia is the installation, mounting and cabling of new hardware in a data centre that another company owns and runs. Reboot Monkey engineers are dispatched to the customer's facility to mount the hardware, cable it, label it and run power-on checks. Quotes are on request.
9
of our services in Saudi Arabia
Choose your city
Services in Rack and Stack
In depth
Rack and Stack: 8 sections, open any to read more.
Server Racking in Saudi Arabia: How It Works
Racking servers in Saudi Arabia means installing, mounting and cabling new hardware inside a data centre that another company owns and runs. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it does not own datacenters, so the physical work takes place in the facility that houses the customer's rack. Rack and stack is the first physical step of a deployment, because the hardware has to be in the rack before any other service works on it.
A request starts with the customer's description of the job. The details that matter are the hardware that is arriving, the rack it is going into, the way it should be cabled and the labelling expected on cables and devices. The facility and rack named in the description tell Reboot Monkey where the engineer is dispatched. Reboot Monkey reads the description, confirms the scope with the customer and returns a quote. Prices are quoted on request and depend on the customer and the size of the job, so a single server and a full rollout are scoped separately.
Reboot Monkey also sells data-centre hardware, so a single request can cover both the equipment and its installation, and hardware that Reboot Monkey supplies is delivered as part of the same job. The customer decides at the start whether the hardware comes from the customer or from Reboot Monkey, whether network is part of the job, and whether further services such as monitoring or remote hands follow the installation. Settling those points in the request keeps the quote specific to the job.
From first contact to finished work, a request moves through these steps:
- Request: the customer contacts Reboot Monkey with the job description, naming the hardware, the facility in Saudi Arabia and the rack.
- Scope and quote: Reboot Monkey confirms what the job includes and quotes it.
- Dispatch: a Reboot Monkey engineer is dispatched to the customer's facility to carry out the work on site.
- Installation: the engineer mounts the hardware in the rack, cables it, applies the labelling and runs power-on checks.
- Network: where the order includes connectivity, Reboot Monkey orders the cross connects and carrier circuits.
Datacenter Landscape in Saudi Arabia
Data centres in Saudi Arabia, ordered by the number of networks present:
- center3 JED2 - Jeddah: 16 networks
- KACST Building 44 (King Abdul Aziz City for Science and Technology), King Abdullah Branch Rd, Al Raed, 12354 Riyadh: 8 networks
- center3 RUH4 - Riyadh: 8 networks
- center3 RUH1 - Riyadh: 6 networks
- Mobily JED1 DC (Etihad Etisalat (Mobily)), Abhur Al Janubiyah District, 22233 Jeddah: 4 networks
- center3 JED1 - Jeddah: 4 networks
- center3 DMM2 - Dammam: 3 networks
- center3 RUH3 - Riyadh: 3 networks
- Nournet Nahdah Data Centre (Nour Internet Company for Communications and Information Technology Ltd.), Ibn Alhaitham St., 13222 Riyadh: 2 networks
- center3 DMM1 - Dammam: 2 networks
Rack and Stack by City
City pages for rack and stack in Saudi Arabia:
- Riyadh: https://www.rebootmonkey.com/en/saudi-arabia/riyadh/rack-and-stack/
Server Racking in Saudi Arabia: What We Deliver
Rack and stack in Saudi Arabia covers the physical installation of new hardware: installing, mounting and cabling it. Reboot Monkey engineers carry out the work in the customer's rack, inside the facility, once the hardware is in the building.
Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Rack space, IP transit and leased IP addresses are sold by Reboot Monkey as well, so connectivity can be part of the same order as the installation.
A fibre inspection scope and cleaning kit are available on request, which allows fibre connections to be inspected and cleaned as part of the cabling step.
Rack and stack applies to new hardware, so a request about equipment that is already in service belongs to a different service. In a hardware refresh, for example, the new servers are installed through rack and stack, equipment moving between racks, rooms or facilities is server migration, and removing and disposing of the retired servers is data center decommissioning.
Smart hands, which is technical work that needs diagnostic judgement and configuration knowledge, is requested separately when a job goes beyond physical installation.
Because quotes are built per job, the scope is what a quote is written against: the devices to mount, the cabling to run, the labelling to apply and the checks to perform.
The scope is written as tasks because each task can be checked on site. Labelling is complete when every cable and device carries a label, and a power-on check is complete when the hardware has powered on. Cabling is complete when the hardware is connected as described in the request. A customer reviewing the finished work can compare it with the job description task by task.
The scope breaks down into these tasks:
- Mounting: new servers and network equipment are installed and mounted in the customer's rack.
- Cabling: the installed hardware is cabled to the rest of the rack and to the network connections ordered for it.
- Labelling: cables and devices are labelled so that the customer's team can identify them later.
- Power-on checks: once the hardware is cabled, the engineer checks that it powers on.
Why Reboot Monkey for Server Racking in Saudi Arabia
Reboot Monkey sells the hardware, the rack space, the network and the engineering labour that installs them. For a procurement manager, that means the equipment and its installation can be requested from a single party. For a CTO or IT Director, it means the engineer who mounts the hardware works for the company that orders the circuits when network is part of the job.
Responsibilities in a rack and stack job are divided by role. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey's part is the hardware work in the customer's rack, together with the ordering of network where the job includes it, and the customer's part is the description of what is to be installed.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, including sites in Saudi Arabia. A job in Saudi Arabia therefore has a dispatched engineer and a named backup attached to it. The customer knows in advance who covers the site if the dispatched engineer is not available.
After the installation, the customer can stay with the same provider for ongoing work. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks, and instructions can refer to the labelled cables and devices. Smart hands covers the cases where a task goes beyond physical work, so a cable check belongs to remote hands and a fault that has to be diagnosed belongs to smart hands. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Retired hardware can leave through IT asset disposition (ITAD), which covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. ITAD is requested separately from rack and stack and is quoted case by case where resale or buyback applies.
A rack and stack engagement can be read from the facts of how it is run. The scope is written as tasks. The quote is on request and depends on the customer and the size of the job. Network, where the job includes it, is ordered by Reboot Monkey. Every customer site has a named backup engineer.
How Reboot Monkey Works
These terms apply in every facility in Saudi Arabia where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Rack and Stack in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. The figure describes where Reboot Monkey's engineers work in total, not the number of sites in any one country. A deployment that begins in Saudi Arabia can be extended to other countries with the same kind of request.
A rollout across several countries is requested one site at a time. Each site has its own job description, its own scope and its own quote. Where several sites are listed in a single request, the sites are separated into their own jobs.
Moving between countries does not change what rack and stack means. The definition, installing, mounting and cabling new hardware, and the scope of cabling, labelling and power-on checks stay the same, so a customer can compare site quotes task by task.
Repeating a hardware build in several countries lets the customer reuse a single job description and change only the facility and the rack for each site.
For a site where the customer has no rack yet, rack space, IP transit and leased IP addresses can be requested together with the installation, because Reboot Monkey sells them inside data centres that other companies own and run. The network part of each site's job depends on the carriers present in that facility.
Where a rollout also involves moving existing equipment between facilities, that part is server migration, which is the moving of equipment between racks, rooms or facilities. The new equipment arriving at the destination is the rack and stack part of the job.
Customers extending a rollout beyond Saudi Arabia can continue with Rack and Stack in Singapore.
Requests for any country go through the same contact route: the customer describes the job and Reboot Monkey replies with a scoped quote that lists the tasks for the site.
Every site request states the same points, which form the basis of the quote for that site:
- the hardware to be installed and whether the customer or Reboot Monkey supplies it
- the facility and the rack where the hardware goes
- the cabling and labelling expected
- whether network, meaning cross connects and carrier circuits, is part of the job
- whether remote hands, smart hands or hardware monitoring follow the installation
- the order in which the sites are to be completed
Frequently Asked Questions
What does rack and stack cover in Saudi Arabia?
Rack and stack in Saudi Arabia covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. Where network is part of the order, Reboot Monkey orders the cross connects and carrier circuits and its engineers patch the cabling in the rack. Quotes are on request.
Do you work in every datacenter in Saudi Arabia?
Reboot Monkey engineers work in any facility in Saudi Arabia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Saudi Arabia?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Saudi Arabia?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Saudi Arabia
Request a Quote for Rack and Stack
Describe the hardware, the facility and the rack, and Reboot Monkey returns a scoped quote.