Skip to content

Senegal · Dakar

Rack and Stack in Dakar

Rack and stack in Dakar means installing, mounting and cabling new hardware in your rack, with labelling and power-on checks included in the work. Reboot Monkey engineers are dispatched to the facility, and quotes are provided on request.

Rack and Stack

  • 8

    services detailed for Dakar

  • 1

    agreement for every city

Plan your Dakar installation

Send the hardware list and the target rack, and Reboot Monkey will scope the job and quote it.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Dakar

PAIX Dakar stands on Deux Mamelles in Dakar. For a CTO, IT director or procurement manager planning new hardware in the city, the practical questions are who puts it into the rack and how the work is handled. Rack and stack means installing, mounting and cabling new hardware. Reboot Monkey is a third-party datacenter services operator that works inside data centres other companies own and run. It is not a hosting company and does not own a datacenter. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request starts with the hardware you intend to install and the rack it is going into. From that, Reboot Monkey scopes the job and sends a quote, because prices are quoted on request and depend on the customer and the size of the job. Once the quote is accepted, an engineer is dispatched to the customer's facility in Dakar to carry out the installation. Before you send the request, it helps to have these points ready:

  • The hardware to be installed and how much of it there is.
  • The rack the hardware is destined for.
  • Whether the rack also needs network connectivity.
  • The date by which the equipment should be powered on.

Datacenter Facilities in Dakar

Data centres in Dakar, ordered by the number of networks present:

  • ONIX Senegal, Rue NG-45, Almadies Zone 9, No 107, BP 12000 Dakar: 4 networks
  • PAIX Dakar (PAIX Data Centres), Deux Mamelles, 0000 Dakar

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks; quotes are on request. The engineer mounts the hardware, runs and labels the cabling, and performs the power-on checks before handing the rack back to you. Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. For fibre links, a fibre inspection scope and cleaning kit are available on request. Rack and stack often sits next to other physical services in the same engagement, and each can be added to a request once the new hardware is in place:

  • Remote hands: physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. A customer can therefore place one request for the capacity and for the installation work, rather than coordinating separate parties for each part of the build. The role is limited to what the customer needs inside the rack: the hardware, the network for the rack and the engineers who install it. Reboot Monkey does not host workloads and does not operate the building. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the installation has a named second person from the start of the engagement. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a rack and stack job in Dakar, that means the engineer dispatched to your facility works to the same scope as on any other Reboot Monkey job: cabling, labelling and power-on checks, with the quote agreed before work starts.

How Reboot Monkey Works

These terms apply in every facility in Dakar where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Dakar?

In Dakar, rack and stack covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. Where the rack needs connectivity, Reboot Monkey orders the cross connects and carrier circuits and its engineers patch the cabling. A second, briefed engineer is named as backup for the customer site, and quotes are on request.

Do you work in every datacenter in Dakar?

Reboot Monkey engineers work in any facility in Dakar where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Dakar?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Dakar?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Dakar installation

Send the hardware list and the target rack, and Reboot Monkey will scope the job and quote it.

Published:

Get a quote