Skip to content

Solomon Islands · Honiara

Smart Hands in Honiara

Smart Hands in Honiara is technical work at the rack that needs diagnostic judgement and configuration knowledge. Reboot Monkey dispatches engineers to the customer's facility to deliver on-site IT support in Honiara data centers, from fault diagnosis to cabling and configuration, inside facilities that other companies own and run.

Smart Hands

  • 8

    services detailed for Honiara

  • 1

    agreement for every city

Request Smart Hands in Honiara

Describe the equipment, the task and the timing you need, and Reboot Monkey will quote the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Honiara

Smart hands is technical work that needs diagnostic judgement and configuration knowledge, carried out at the rack. In Honiara, Reboot Monkey dispatches its engineers to the customer's facility to do that work. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Smart hands sits between two neighbouring services. Remote hands covers physical tasks carried out on your instruction, and rack and stack covers installing, mounting and cabling new hardware. The first step in any request is to say which kind of work you need, because that decides how the task is scoped and assigned.

Datacenter Facilities in Honiara

Data centres in Honiara, ordered by the number of networks present:

  • SATSOL LIMITED, Level 2, Unit 2.4B Anthony Saru Building, - Honiara

Our Smart Hands Services

A smart hands request is scoped by the work that needs judgement rather than by a fixed task list. Around it, Reboot Monkey delivers the neighbouring services below, each defined as follows.

Network work follows the same pattern. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request.

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey is vendor-neutral. A smart hands request is scoped around the customer's own equipment and the task described, not around a product line. A second, briefed Reboot Monkey engineer is named as backup for every customer site. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

A useful request names the equipment involved, its position in the rack, the symptom or the change required, and the time by which the work must be finished. Describe the current state of the equipment as well as the state you want it in. State whether the work needs diagnostic judgement, which makes it smart hands, or is a physical action on your instruction, which makes it remote hands. If the task includes new cabling or a network change, say so at the start, because cross connects and carrier circuits are ordered from the facility operator and the carriers.

Prices are quoted on request and depend on the customer and the size of the job. Send the details of the work to Reboot Monkey to receive a quote.

How Reboot Monkey Works

These terms apply in every facility in Honiara where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Honiara?

In Honiara, smart hands covers technical work at the rack that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to the customer's facility to carry it out, and they install and patch cabling in the customer's rack. Physical tasks done on your instruction, such as reboots, cable checks, component swaps and visual checks, are handled as remote hands.

Do you provide on-site IT support in Honiara data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility, where they carry out smart hands and remote hands work, install and patch cabling in the customer's rack, and handle rack and stack installations and server migration. To start a request, send the equipment details, the task and the timing you need, and Reboot Monkey quotes the job.

Do you work in every datacenter in Honiara?

Reboot Monkey engineers work in any facility in Honiara where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Honiara?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Honiara?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Honiara

Describe the equipment, the task and the timing you need, and Reboot Monkey will quote the job.

Published:

Get a quote