Skip to content

Solomon Islands · Honiara

Rack and Stack in Honiara

Rack and stack in Honiara is the installation, mounting and cabling of new hardware in the customer's rack. Reboot Monkey engineers handle cabling, labelling and power-on checks inside the data centre, and order the cross connects and carrier circuits the hardware needs. Quotes are on request.

Rack and Stack

  • 8

    services detailed for Honiara

  • 1

    agreement for every city

Plan your installation in Honiara

Describe the hardware and the connectivity it needs, and Reboot Monkey will prepare a quote.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Honiara

Rack and stack is the installation, mounting and cabling of new hardware. In Honiara the work begins when equipment reaches the data centre and ends when it is mounted, cabled, labelled and checked at power-on. A new deployment can be requested as a single job: hardware delivered, installed and cabled by Reboot Monkey engineers in the customer's rack.

The scope of a rack and stack job covers cabling, labelling and power-on checks, and quotes are on request. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Choosing the right service comes before the request is sent. Rack and stack covers new hardware. Moving equipment between racks, rooms or facilities is server migration. Physical tasks on existing equipment, such as reboots, cable checks, component swaps and visual checks, are remote hands, and technical work that needs diagnostic judgement and configuration knowledge is smart hands. Retired hardware is handled by data center decommissioning and IT asset disposition.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters.

Datacenter Facilities in Honiara

Data centres in Honiara, ordered by the number of networks present:

  • SATSOL LIMITED, Level 2, Unit 2.4B Anthony Saru Building, - Honiara

Our Rack and Stack Services

A rack and stack request in Honiara is made up of the parts below. Reboot Monkey engineers carry them out in the customer's rack, inside the data centre where the hardware has been delivered.

Reboot Monkey sells the network for the rack, so the circuits a new installation needs are part of the same request and are ordered by Reboot Monkey, not by the customer from each carrier. Each quote is prepared on request and depends on the customer and the size of the job. The request should name the hardware to be installed and the connectivity it needs, so that the quote reflects the work to be done.

  • Mounting: new hardware is installed and mounted in the customer's rack.
  • Cabling: Reboot Monkey engineers install and patch the cabling in the customer's rack.
  • Labelling: labelling is part of every rack and stack job.
  • Power-on checks: the installed hardware is checked when it is powered on.
  • Cross connects and carrier circuits: Reboot Monkey orders them from the facility operator and from the carriers present in the facility.
  • Fibre inspection: a fibre inspection scope and cleaning kit are available on request.

Why Reboot Monkey

A fixed installation date depends on who is available on the day. A second, briefed Reboot Monkey engineer is named as backup for every customer site.

Rack space, IP transit and leased IP addresses are sold by Reboot Monkey alongside the installation work, so a new rack can be requested together with its address space and upstream connectivity.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

A rack and stack request is handled in this order:

Hardware monitoring can follow the installation. The Reboot Monkey NOC monitors the customer's servers and network equipment, and remote hands or smart hands are available for later work on the installed equipment.

  • The customer describes the hardware to be installed and the connectivity it needs.
  • Reboot Monkey prepares a quote, which depends on the customer and the size of the job.
  • Reboot Monkey engineers carry out the mounting, cabling, labelling and power-on checks.
  • The named backup engineer is briefed on the site in case the first engineer cannot attend.

How Reboot Monkey Works

These terms apply in every facility in Honiara where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Honiara?

Rack and stack covers installing, mounting and cabling new hardware. The scope includes cabling, labelling and power-on checks, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Cross connects and carrier circuits are ordered from the facility operator and the carriers present in the facility. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Honiara?

Reboot Monkey engineers work in any facility in Honiara where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Honiara?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Honiara?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your installation in Honiara

Describe the hardware and the connectivity it needs, and Reboot Monkey will prepare a quote.

Published:

Get a quote