Skip to content

Sri Lanka · Colombo

Smart Hands in Colombo

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey provides on-site IT support in Colombo data centers by dispatching engineers to the customer's facility, working inside data centres that other companies own and run.

Smart Hands

  • 8

    services detailed for Colombo

  • 1

    agreement for every city

Plan Smart Hands in Colombo

Describe the fault or the change and Reboot Monkey will respond with a quote for the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Colombo

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. It differs from remote hands, which is physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Lanka Bell Limited stands on Galle Rd in Colombo.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a datacenter. For a buyer in Colombo, that means smart hands is one part of a single supply relationship that can also include the rack, the connectivity and the hardware itself.

A smart hands request begins with the customer describing the fault or the change that is needed. Reboot Monkey engineers are then dispatched to the customer's facility in Colombo to carry out the work. The sections below set out what that work includes and how the engagement is arranged.

Datacenter Facilities in Colombo

Data centres in Colombo, ordered by the number of networks present:

  • Lanka Bell Limited, 344 Galle Rd, Colombo-03, 00300

Our Smart Hands Services

Smart hands work in Colombo is organised around what the engineer has to decide on site. When the cause of a fault is not obvious, the engineer has to judge it before acting, and that judgement is what separates smart hands from a scripted physical task. The scope covers the following.

  • Diagnostic work on servers and network equipment, where the engineer establishes the cause of a fault before making a change.
  • Configuration work that depends on knowledge of the equipment involved, carried out on the customer's instruction.
  • Cabling and patching: Reboot Monkey engineers install and patch the cabling in the customer's rack.
  • Cross connects and carrier circuits: Reboot Monkey orders them from the facility operator and from the carriers present in the facility, so the network reaches the rack.
  • Fibre inspection: a fibre inspection scope and cleaning kit are available on request.

Why Reboot Monkey

A buyer comparing providers for work inside a data center usually needs to know who turns up, under whose rules, and what else the same supplier can take on. The answers here come from how Reboot Monkey operates.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the work does not depend on one person's diary, and the backup already knows the site.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Smart hands connects to the other services Reboot Monkey delivers in the same facility. Rack and stack means installing, mounting and cabling new hardware. Server migration means moving equipment between racks, rooms or facilities. Data center decommissioning means removing and disposing of retired hardware, and hardware monitoring means the Reboot Monkey NOC monitors the customer's servers and network equipment. A customer who starts with a single smart hands task can add any of these without a new supplier.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so the same way of working applies when a customer's equipment sits outside Sri Lanka.

How Reboot Monkey Works

These terms apply in every facility in Colombo where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Colombo?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. In Colombo, Reboot Monkey engineers are dispatched to the customer's facility to diagnose faults on servers and network equipment and to install and patch cabling in the customer's rack. Cross connects and carrier circuits are ordered from the facility operator and carriers, and a fibre inspection scope and cleaning kit are available on request.

Do you provide on-site IT support in Colombo data centers?

Yes. Reboot Monkey engineers carry out the work on site in the customer's facility. The customer raises a request describing the fault or change, an engineer is dispatched to perform the diagnostic, configuration, cabling or equipment task, and a second, briefed engineer is named as backup. Monitoring of the customer's servers and network equipment is handled separately by the Reboot Monkey NOC.

Do you work in every datacenter in Colombo?

Reboot Monkey engineers work in any facility in Colombo where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Colombo?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Colombo?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Plan Smart Hands in Colombo

Describe the fault or the change and Reboot Monkey will respond with a quote for the job.

Published:

Get a quote