Sri Lanka · Colombo
Rack and Stack in Colombo
Rack and stack in Colombo is the installation, mounting and cabling of new hardware in a data centre rack. Reboot Monkey engineers are dispatched to the customer's rack to cable, label and run power-on checks, and quotes are given on request.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Colombo
1
agreement for every city
Plan your rack and stack in Colombo
Describe the hardware, the rack and the work needed, and Reboot Monkey will quote the job on request.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Colombo
Lanka Bell Limited stands on Galle Rd in Colombo. For a business placing hardware in a Colombo data centre, rack and stack is the physical step that turns delivered equipment into installed equipment. Servers, switches and other devices are mounted in the rack, cabled, labelled and checked before the people who configure them take over.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters. For rack and stack in Colombo, this means one company can supply the rack space and the connectivity and also dispatch the engineer who installs the equipment.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request therefore starts with the customer describing the hardware, the target rack and the work needed, and the installation is carried out within those rules. Quotes are on request and depend on the customer and the size of the job.
Datacenter Facilities in Colombo
Data centres in Colombo, ordered by the number of networks present:
- Lanka Bell Limited, 344 Galle Rd, Colombo-03, 00300
Our Rack and Stack Services
Rack and stack means installing, mounting and cabling new hardware. In Colombo the scope covers cabling, labelling and power-on checks, and quotes are on request. A request names the hardware, the rack and the work required, and the quote follows from the size of the job.
Connectivity belongs to the same piece of work when the customer needs it. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The customer deals with one company for the circuit order and for the patching.
A fibre inspection scope and cleaning kit are available on request, which matters when a fibre link is patched and needs to be checked before it is put into use.
Once the hardware is racked, three related services are available for the work that follows:
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
Why Reboot Monkey
A second, briefed Reboot Monkey engineer is named as backup for every customer site. A rack and stack job in Colombo is therefore planned with a named alternate from the start.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer who installs hardware in Colombo and in other places can request rack and stack for each site from Reboot Monkey.
Installation is the first stage of the hardware's life in the rack, and Reboot Monkey also covers the later stages. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. Data center decommissioning is the removal and disposal of retired hardware. IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
For a CTO, IT director or procurement manager, this keeps installation, connectivity and the end of the hardware's life with one company, quoted on request according to the customer and the size of the job.
How Reboot Monkey Works
These terms apply in every facility in Colombo where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Colombo?
Rack and stack in Colombo covers installing, mounting and cabling new hardware. The scope includes cabling, labelling and power-on checks. Reboot Monkey engineers install and patch the cabling in the customer's rack, and cross connects and carrier circuits are ordered from the facility operator and the carriers present in the facility. Quotes are on request and depend on the customer and the size of the job.
Do you work in every datacenter in Colombo?
Reboot Monkey engineers work in any facility in Colombo where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Colombo?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Colombo?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your rack and stack in Colombo
Describe the hardware, the rack and the work needed, and Reboot Monkey will quote the job on request.