Map: Natural Earth
Smart Hands
Smart Hands in Thailand
Smart Hands in Thailand is on-site IT support in Thailand data centers for technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers dispatched to the customer's racks. Send a request naming the data center, the rack and the task, and Reboot Monkey quotes the job.
9
of our services in Thailand
Choose your city
Services in Smart Hands
In depth
Smart Hands: 8 sections, open any to read more.
Smart Hands in Thailand: How It Works
Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge. In Thailand, Reboot Monkey delivers it to customers whose equipment sits in a colocation facility: an engineer is dispatched to the customer's rack, establishes what is wrong or what has to change, and carries the task through at the equipment. The work can range from tracing a fault to bringing a device back into the configuration the customer's network expects. The servers, network devices and cabling remain the customer's own, and Reboot Monkey works on them on the customer's instruction.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request for Thailand therefore starts from the data center that holds the equipment, so the first thing the request needs is the name of that data center.
Smart hands is the service to name when the cause of a fault is not yet known or when a change needs configuration knowledge. The request does not need to arrive with a finished diagnosis; reaching one is part of the engineer's task.
Smart hands work is carried out on the customer's equipment, at the rack the request names. A request that states the symptom, the equipment and its rack position gives the engineer the context to begin diagnosis on arrival.
From first contact to finished work, a request follows four steps.
- The customer names the data center, the rack position and the task, and adds whatever diagnostic information is already to hand, such as the symptom seen on the device or the alert that was raised.
- Reboot Monkey assesses the request and quotes the job as the request describes it. Prices are quoted on request and depend on the customer and the size of the job.
- A Reboot Monkey engineer is dispatched to the customer's facility in Thailand.
- The engineer carries out the diagnosis and the configuration work at the customer's rack, applying configuration knowledge to the customer's existing setup, and completes the task that the request set out.
Datacenter Landscape in Thailand
Data centres in Thailand, ordered by the number of networks present:
- Telehouse – Bangkok (Telehouse - Global Data Centers), 66 Rimklong Bangkapi Road, Bangkapi, Huai Khwang, 10310 Bangkok: 69 networks
- TCC Technology Data Center- Bangkok,Thailand (TCC BNDC,TCC Bangna,TCCtech) (TCC Technology Co., Ltd), 1856 Interlink Tower II Bangna Trad Rd K.M. 4.5, 10260 Bangkok: 55 networks; carriers SG.GS
- Arise IDC - Bangkok North 1, Thailand (Arise IDC Company Limited, Thailand), 47/553-554, 557-558 Moo3, Bangkok Land Building, Popular 3 Road, Banmai, 11120 Pakkret: 39 networks
- CS LoxInfo Data Center - The Cloud (CS Loxinfo Public Company Limited), 181 Ratchada Ramintra Rd., Nuanchan,Buengkum, 10230 Bangkok: 39 networks
- NT Bangrak Tower (NATIONAL TELECOM PLC), 72, Charoenkrung Road, Si Phraya (Sub-district), Bang-rak (District), 10500 Bangkok: 34 networks
- JasTel Data Center (Thailand) (Jastel Network (Thailand)), 200 Moo 4 7th fl. Jasmine International Tower Chaengwattana road Pakkret, JasTel Data Center 200 หมู่ 4 7th fl. อาคารจัสมินอินเตอร์เนชั่นแนล ตำบล ปากเกร็ด อำเภอ ปากเกร็ด นนทบุรี 11120, Nonthaburi: 24 networks
- STTGDC BKK1, 1 Ramkamhaeng Road, Soi 28, Hua Mak , Bangkok 10240: 21 networks
- CS LoxInfo Data Center - CW Tower (CS Loxinfo Public Company Limited), Cyber World Tower A, 90 Ratchadapisek Rd., Huaykwang, Huaykwang, 10310 Bangkok: 20 networks
- Tellus Data Center (CS Loxinfo Public Company Limited), 91 Moo12, Phahonyothin Road, Khlong Nueng District, 12120 Pathum Thani: 17 networks
- NTT Bangkok 2 Data Center (BKK2) (NTT DATA's Global Data Centers division), 700/86 Soi Amata Nakorn Industrial, Ban Kao, Phan Thong District, 20000 Chon Buri: 12 networks
Smart Hands by City
City pages for smart hands in Thailand:
- Bangkok: https://www.rebootmonkey.com/en/thailand/bangkok/smart-hands/
Smart Hands in Thailand: What We Deliver
The core of the service is the work its definition names: technical tasks that need diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers at the customer's rack. In Thailand that core is delivered next to a set of on-site services that each have a stated scope, so a request can be matched to the service that fits the job. Each service is delivered by Reboot Monkey engineers at the customer's rack, except hardware monitoring, which the Reboot Monkey NOC carries out.
Rack and stack, structured cabling and GPU and AI cluster deployment are installation services, while smart hands is the diagnostic work that needs judgement. A single request may name more than one of these services when the job needs them. Smart hands itself is not a list of fixed tasks; it is defined by the kind of work: an engineer who has to read a symptom, decide what to change and apply the configuration.
Recurring work is handled through remote hands retainers and hour blocks: remote hands agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request.
A fibre inspection scope and cleaning kit are available on request for fibre work.
The scopes of the services are as follows:
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Rack and stack: installing, mounting and cabling new hardware, whether the customer already holds it or orders it through Reboot Monkey's hardware supply.
- Server migration: moving equipment between racks, rooms or facilities.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- GPU and AI cluster deployment: racking, cabling and node swaps for a GPU or AI cluster.
- Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover. Because the design ends with documentation and a controlled handover, the equipment passes to the customer's team with the design recorded.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey for Smart Hands in Thailand
Reboot Monkey is a third-party datacenter services operator and not a hosting company. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. Smart hands is one of those services, and the others are what allow a single supplier to carry a job from the circuit to the rack.
Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. These orders are placed for the customer's rack, so the circuit and the cabling that ends in it are arranged together.
IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs, so the quote for a customer in Thailand is made for the data center the customer has chosen. IPv4 leasing covers leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement.
For a customer who wants the whole deployment handled, IT infrastructure turnkey and run works as follows: you or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.
Hardware supply covers data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
The engineer who diagnoses a fault at the rack therefore works for the same company that orders the circuit, supplies the spare part and, where monitoring is in place, watches the equipment from the NOC.
Continuity is arranged for each customer site: a second, briefed Reboot Monkey engineer is named as backup for every customer site.
Each of these is requested for a specific customer and site, and none of them changes who delivers the smart hands work: Reboot Monkey engineers dispatched to the customer's facility.
How Reboot Monkey Works
These terms apply in every facility in Thailand where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Smart Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in Thailand and at other sites can raise a smart hands request for each site in the same way: the data center, the rack position and the task. The scope of each service stays the same wherever the equipment stands, and the data center differs from site to site, so the request names it each time.
Work that spans several sites is organised as multi-site rollouts: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement. A rollout covers the installation across locations, and a diagnostic or configuration task at one of those sites is a smart hands request for that site.
Moves are covered separately. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. Data center decommissioning covers removing and disposing of retired hardware on its own, and ITAD with buyback is IT asset disposition with the buyback of the retired hardware, quoted case by case.
Connectivity between a customer's sites can be ordered as dark fibre between data centres and wavelength circuits, which are ordered from the carriers and quoted on request.
For equipment in Switzerland, the request is placed through Smart Hands in Switzerland, naming the data center, the rack position and the task. A site in Taiwan is handled through Smart Hands in Taiwan, and a deployment in Turkey through Smart Hands in Turkey.
Frequently Asked Questions
Smart Hands vs. Remote Hands | What's the Difference?
Remote hands is physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The difference is where the judgement sits: with the customer for remote hands, and with the engineer for smart hands.
What does smart hands cover in Thailand?
In Thailand, smart hands covers technical work at the customer's rack that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer dispatched to the facility. Reboot Monkey also delivers rack and stack, server migration, structured cabling and the recording of equipment by serial number, asset tag and rack position when a job calls for them.
Do you provide on-site IT support in Thailand data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's racks in Thailand data centers and carry out the work on site: diagnosis and configuration, installing and mounting hardware, patching cabling and moving equipment between racks. A request starts with the customer naming the data center, the rack position and the task, and the job is then quoted.
Do you work in every datacenter in Thailand?
Reboot Monkey engineers work in any facility in Thailand where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Thailand?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with smart hands in Thailand?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Cities we cover in Thailand
Request Smart Hands in Thailand
Send the data center, the rack position and the task, and Reboot Monkey quotes the job.