Map: Natural Earth
Rack and Stack
Server Racking in Turkey
Server racking in Turkey means installing, mounting and cabling new hardware in a data centre. A Reboot Monkey engineer is dispatched to the customer's facility to carry out the work, which covers cabling, labelling and power-on checks. Quotes are on request, and Reboot Monkey handles each request from first contact to finished work.
7
of our services in Turkey
Choose your city
Services in Rack and Stack
- Rack and Stack
- Colocation
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- Data Center Decommissioningon request
- ITADon request
In depth
Rack and Stack: 8 sections, open any to read more.
Server Racking in Turkey: How It Works
Rack and stack is the work of installing, mounting and cabling new hardware. For sites in Turkey, Reboot Monkey delivers it inside data centres that other companies own and run. A buyer sends a request that names the hardware and the site, and a Reboot Monkey engineer is dispatched to the customer's facility to carry out the physical work. The request is handled by Reboot Monkey from first contact to finished work.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request therefore starts from the site: the operator's access policy applies to the job, and the engineer follows it on the day of the work. Naming the site, and where known the room and rack position, in the first message keeps the request specific.
The sequence is the same whether the job is one server or a full rack. What changes with the size of the job is the quote and the amount of cabling to install and label. A request that states the hardware, its position in the rack, the cabling required and the site gives the engineer the full picture before the visit, and it lets the quote follow the actual work.
Racking is often the first step of a larger deployment. After the hardware is installed, the physical tasks and technical work that follow are separate services, so a request for rack and stack stays limited to putting new hardware into the rack and cabling, labelling and checking it. A further request can be made at any time.
Because a quote depends on the customer and the size of the job, two requests for similar hardware can be quoted differently. The quote is prepared from the request, which is why the first message should carry the detail. A request moves through these steps:
- Request: the customer describes the hardware to be installed, where it is going and what cabling it needs.
- Quote: Prices are quoted on request and depend on the customer and the size of the job. Reboot Monkey returns the quote, and the work is arranged from there.
- Dispatch: a Reboot Monkey engineer is sent to the facility where the hardware is going.
- Installation: the engineer mounts the hardware in the rack and installs the cabling.
- Finishing: the engineer labels the cabling and runs power-on checks on the new hardware.
Datacenter Landscape in Turkey
Data centres in Turkey, ordered by the number of networks present:
- MedNautilus Istanbul (Telecom Italia Sparkle S.p.A.), Çobançesme Mah. Kimiz Sokak NO:30, 34194 Istanbul: 50 networks; carriers GIBIRNet, NetIX and TurkIX
- Equinix IL2 - Istanbul (Equinix, Inc.), Yukarı Dudullu Organize Sanayi Bölgesi, 3. Cadde No:4 Ümraniye, 34775 Istanbul: 48 networks; carriers EdgeUno, GIBIRNet and ZET.NET Backbone
- Turk Telekom Atakoy Santrali (Turk Telekomunikasyon Anonim Sirketi), Ataköy 3-4-11, Makbule Atadan Cd No:8, 34158 Istanbul: 27 networks; carriers TurkIX
- PremierDC Veri Merkezi A.S. - Istanbul, Otakcilar Cad. No: 78, Kat:4, Flat Ofis, 34050 Istanbul: 25 networks; carriers GIBIRNet
- Mars Datacenter Istanbul-1, Maslak, Istanbul, 34467: 24 networks
- Radore Istanbul (Radore Veri Merkezi Hizmetleri A.S.), Büyükdere Cad. No: 171 Sisli, 34394 Istanbul: 24 networks; carriers GIBIRNet
- TurkNet Iletisim Hizmetleri A.S, Büyükdere Caddesi No:121, Ercan Plaza Kat:2, 34394 Gayrettepe, İstanbul, Istanbul: 23 networks; carriers GIBIRNet
- DATACASA DC IST-1 (Datema Bilsim Ticaret Anonim Sirketi), Kayabasi Mahallesi, Ulubatli Hasan Caddesi, D Blok No:3, 34494 Istanbul: 20 networks; carriers GIBIRNet
- Equinix IL4 - Istanbul (Equinix, Inc.), Dudullu OSB, 3. Cadde, No.4, Yukarı Dudullu, 34776 Istanbul: 18 networks; carriers ZET.NET Backbone
- Turk Telekom Gayrettepe IDC (Turk Telekomunikasyon Anonim Sirketi), Yıldız Posta Avn. Vefa Bayırı Str. No:2 District Building 2th Floor Internet Data Center (IDC), 34349 Gayrettepe: 18 networks
Rack and Stack by City
City pages for rack and stack in Turkey:
- Istanbul: https://www.rebootmonkey.com/en/turkey/istanbul/rack-and-stack/
Server Racking in Turkey: What We Deliver
A rack is only useful once it is connected. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The installation and the connectivity it depends on can therefore be requested together, so a rack that receives new hardware can have its connectivity planned in the same conversation.
For fibre connections, a fibre inspection scope and cleaning kit are available on request. A buyer who expects fibre cabling in the rack can ask for them when the job is requested.
A rack and stack job ends when the hardware is mounted and cabled, the cabling is labelled and the power-on checks are done. From that point the equipment is in the customer's rack, and work that follows, such as diagnosing a fault, changing configuration, moving the equipment or retiring it, is a new request under the service that matches it.
A request that mixes types of work is separated by the type of work, so each task is handled as the service it is. New hardware going into a rack is rack and stack. Equipment that is already in service and is moving between racks, rooms or facilities is server migration. A reboot or a component swap on installed equipment is remote hands, and a task that needs a diagnosis is smart hands.
Rack and stack is one of several services Reboot Monkey delivers, and the line between them is the type of work being done. These are the services that sit next to it:
- Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- Data center decommissioning: removing and disposing of retired hardware.
Why Reboot Monkey for Server Racking in Turkey
Reboot Monkey is a third-party datacenter services operator. It works inside data centres that other companies own and run, and it is not a hosting company and does not own datacenters. For a rack and stack request, that positioning sets what the buyer is dealing with: an operator that installs, cables and supports equipment in the building the customer has chosen, rather than one that sells space in a building of its own.
Because Reboot Monkey is not a hosting company, a rack and stack request is not attached to a hosting plan. It is a request for physical work on equipment going into a rack in a facility the customer has chosen. Because Reboot Monkey does not own datacenters, the work is done where the customer's equipment is, and the engineer is dispatched there.
For a procurement manager, the arrangement is simple to place: the installation, the rack space, the transit, the addresses and the network are available from one operator, and the quote is prepared on request. For an IT director, the request names a site and a task, and a Reboot Monkey engineer is dispatched to that site.
Data-centre hardware is among the items Reboot Monkey sells. Where the hardware comes from Reboot Monkey, the operator that sells it is also the operator that installs it in the rack. In both cases the engineer is dispatched to the facility named in the request.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. A rack and stack job therefore does not depend on a single person being available: the backup engineer is named and has been briefed on the site.
Alongside the installation, a buyer can place any of the following with Reboot Monkey:
- Rack space
- IP transit
- Leased IP addresses
- Network for the rack, with the cross connects and carrier circuits ordered on the customer's behalf
- Data-centre hardware
- The services that deliver, install and support that hardware
How Reboot Monkey Works
These terms apply in every facility in Turkey where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Rack and Stack in Other Countries
Rack and stack is delivered outside Turkey as well. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A buyer whose hardware is going into more than one country can request the same installation work for each site, and each request is handled as a rack and stack job in its own right.
A rollout that spans countries is easiest to quote when each site is described separately: the country, the facility, the hardware to be installed and the cabling it needs. Describing sites one by one lets each be quoted for its own work, so a site with a single server and a site with a full rack are not treated alike.
For a rollout that continues in the United Kingdom, see Rack and Stack in United Kingdom. For hardware going into the United Arab Emirates, see Rack and Stack in United Arab Emirates. Each is a separate request with its own site and its own hardware.
In every country a request names the site and the task, and an engineer is dispatched to that site. A buyer who is unsure which services a rollout needs can start from the rack and stack request and add remote hands, server migration or hardware monitoring for the sites where they apply, each requested as the service it is.
Frequently Asked Questions
What does rack and stack cover in Turkey?
Rack and stack in Turkey covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. A Reboot Monkey engineer is dispatched to the customer's facility to carry it out, and quotes are on request. Prices depend on the customer and the size of the job.
Do you work in every datacenter in Turkey?
Reboot Monkey engineers work in any facility in Turkey where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Turkey?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Turkey?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Turkey
Request a Quote for Server Racking in Turkey
Send the hardware, the site and the cabling it needs. Reboot Monkey prepares the quote from your request.