Map: Natural Earth
Remote Hands
Data Center Remote Hands in Turkey
Data center remote hands in Turkey means Reboot Monkey engineers carry out physical tasks on your equipment on your instruction: reboots, cable checks, component swaps and visual checks. It is on-site IT support in Turkey data centers for hardware you already run, ordered as a defined job and quoted on request.
7
of our services in Turkey
Choose your city
Services in Remote Hands
- Remote Hands
- Colocation
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- Data Center Decommissioningon request
- ITADon request
In depth
Remote Hands: 9 sections, open any to read more.
Data Center Remote Hands in Turkey: How It Works
Remote hands is the work a person has to do at the rack when the customer's own staff are not in the building. In Turkey, Reboot Monkey carries it out as physical tasks on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what is to be done and on which equipment, and a Reboot Monkey engineer carries out that task at the device.
Reboot Monkey is a third-party datacenter services operator, not a hosting company, and it does not own data centres. Every remote hands job in Turkey is therefore carried out inside a building that another company runs. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Every request follows the same sequence:
Remote hands covers tasks that can be written down as an instruction. When a job needs diagnostic judgement and configuration knowledge, it is smart hands, which is a separate service with its own definition. Deciding which of the two a job is at the start tells both the customer and the engineer what is being asked.
A request always names the facility, because engineers are dispatched to the site of the job and are not assumed to be waiting there. A task is one action on one named device, and the customer can ask for the same action on several devices in one instruction, for example a visual check of every device in a rack.
A visual check is a natural first step when a device stops responding. The engineer looks at the equipment and tells the customer what can be seen, and the customer then decides whether a reboot, a cable check or a component swap follows.
- The customer states the instruction: the equipment, the task and the site in Turkey.
- Reboot Monkey assigns an engineer and dispatches that engineer to the customer's facility.
- The engineer carries out the task at the customer's rack, as instructed.
- The equipment stays the customer's property, in the customer's own rack.
Datacenter Landscape in Turkey
Data centres in Turkey, ordered by the number of networks present:
- MedNautilus Istanbul (Telecom Italia Sparkle S.p.A.), Çobançesme Mah. Kimiz Sokak NO:30, 34194 Istanbul: 50 networks; carriers GIBIRNet, NetIX and TurkIX
- Equinix IL2 - Istanbul (Equinix, Inc.), Yukarı Dudullu Organize Sanayi Bölgesi, 3. Cadde No:4 Ümraniye, 34775 Istanbul: 48 networks; carriers EdgeUno, GIBIRNet and ZET.NET Backbone
- Turk Telekom Atakoy Santrali (Turk Telekomunikasyon Anonim Sirketi), Ataköy 3-4-11, Makbule Atadan Cd No:8, 34158 Istanbul: 27 networks; carriers TurkIX
- PremierDC Veri Merkezi A.S. - Istanbul, Otakcilar Cad. No: 78, Kat:4, Flat Ofis, 34050 Istanbul: 25 networks; carriers GIBIRNet
- Mars Datacenter Istanbul-1, Maslak, Istanbul, 34467: 24 networks
- Radore Istanbul (Radore Veri Merkezi Hizmetleri A.S.), Büyükdere Cad. No: 171 Sisli, 34394 Istanbul: 24 networks; carriers GIBIRNet
- TurkNet Iletisim Hizmetleri A.S, Büyükdere Caddesi No:121, Ercan Plaza Kat:2, 34394 Gayrettepe, İstanbul, Istanbul: 23 networks; carriers GIBIRNet
- DATACASA DC IST-1 (Datema Bilsim Ticaret Anonim Sirketi), Kayabasi Mahallesi, Ulubatli Hasan Caddesi, D Blok No:3, 34494 Istanbul: 20 networks; carriers GIBIRNet
- Equinix IL4 - Istanbul (Equinix, Inc.), Dudullu OSB, 3. Cadde, No.4, Yukarı Dudullu, 34776 Istanbul: 18 networks; carriers ZET.NET Backbone
- Turk Telekom Gayrettepe IDC (Turk Telekomunikasyon Anonim Sirketi), Yıldız Posta Avn. Vefa Bayırı Str. No:2 District Building 2th Floor Internet Data Center (IDC), 34349 Gayrettepe: 18 networks
Remote Hands by City
City pages for remote hands in Turkey:
- Istanbul: https://www.rebootmonkey.com/en/turkey/istanbul/remote-hands/
Data Center Remote Hands in Turkey: What We Deliver
On-site IT support in Turkey data centers from Reboot Monkey starts with remote hands: physical tasks carried out on the customer's instruction. Remote hands is the narrowest of the services Reboot Monkey offers, because the instruction already contains the action and the engineer is not asked to diagnose a fault. The task types are:
Remote hands rarely stands alone in a hardware estate, and the neighbouring services are defined separately so that each job is ordered under the right name:
The last of these runs alongside remote hands rather than replacing it. The Reboot Monkey NOC monitors the customer's servers and network equipment, while a remote hands engineer acts on that equipment at the rack when the customer instructs it. The first four services in the list are work done with hands and tools in the customer's facility. Data center decommissioning and IT asset disposition cover the end of a hardware life, and hardware monitoring covers the period between installation and retirement.
- Reboots: restarting a named device at the rack on the customer's instruction.
- Cable checks: checking a cable between the ports the customer names.
- Component swaps: replacing a component in the customer's hardware on instruction.
- Visual checks: looking at the equipment and telling the customer what can be seen.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey for Data Center Remote Hands in Turkey
A customer who buys from Reboot Monkey deals with one party for rack space, IP transit, leased IP addresses, network and data-centre hardware, and for the services that deliver, install and support them. Remote hands is one of those services, so the party that is asked to touch the equipment is also the party that supplied its connectivity.
The connection to the network is a concrete case. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a connection later needs a cable check, the party that ordered the circuit and patched the cable is the party carrying out the check.
For optical links, a fibre inspection scope and cleaning kit are available on request, so a fibre connection can be inspected and cleaned during a job.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. The customer therefore has a named second person for the site, in addition to the engineer first assigned to the work.
The work is carried out where the customer's equipment already stands. Reboot Monkey engineers are dispatched to the customer's facility, and no equipment has to be moved to a Reboot Monkey location for a remote hands job, because Reboot Monkey has no data centre of its own for it to be moved to.
Prices are quoted on request and depend on the customer and the size of the job. A quote is therefore based on the instruction as the customer describes it: the equipment, the tasks and the site.
How Reboot Monkey Works
These terms apply in every facility in Turkey where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Remote Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment outside Turkey therefore writes a remote hands request in the same way as for Turkey: the equipment, the task and the site.
For equipment in the United Arab Emirates, a request can be started through Remote Hands in United Arab Emirates. For equipment in the United Kingdom, the route is Remote Hands in United Kingdom.
When one maintenance task touches several countries, for instance the same visual check on identical devices in different facilities, each site is a separate instruction. Each instruction has an engineer dispatched to the customer's facility at that site and its own named backup engineer, because a second, briefed backup is named for every customer site.
The task definitions do not change from one country to the next. Remote hands remains physical work on the customer's instruction, smart hands remains work that needs diagnostic judgement and configuration knowledge, and the neighbouring services keep the meanings listed above. A customer who manages hardware in several countries can therefore use one vocabulary for all instructions.
The party that owns and runs each building differs from site to site, and Reboot Monkey does not take that role in any of them. What stays constant is that the customer states the job and Reboot Monkey carries it out at the customer's equipment.
Frequently Asked Questions About Data Center Remote Hands in Turkey
A remote hands order is a description of the job. It names the equipment, the tasks and the site in Turkey, and it is written so that an engineer who has not seen the rack can act on it directly. A good order contains four elements.
The site is the facility where the equipment is installed. The equipment is the rack and the device, named the way the customer labels them. The task is one of the defined actions: a reboot, a cable check, a component swap or a visual check. The contact is the person at the customer who can answer a question while the job is under way.
If the description turns out to need diagnostic judgement and configuration knowledge, the job is smart hands and is ordered as such. If it involves installing, mounting and cabling new hardware, it is rack and stack. A customer who is unsure which applies can state the equipment and the outcome wanted, and the request is classified from that description before work starts.
Once the order is clear, Reboot Monkey assigns an engineer, dispatches that engineer to the customer's facility and names a second, briefed engineer as backup for the site. The customer's equipment stays where it is, and the quote follows the job as it was described.
- Site: the facility in Turkey where the equipment is installed.
- Equipment: the rack and the device, named the way the customer labels them.
- Task: a reboot, a cable check, a component swap or a visual check.
- Contact: the person at the customer who can answer questions during the job.
Frequently Asked Questions
What does remote hands cover in Turkey?
Remote hands in Turkey covers physical tasks carried out on the customer's instruction at the customer's rack: reboots, cable checks, component swaps and visual checks. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack. A request names the equipment, the task and the site, and an engineer is dispatched to the customer's facility.
Do you provide on-site IT support in Turkey data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Turkey and work at the customer's rack. They carry out physical tasks on instruction, install and patch cabling for network connections Reboot Monkey orders, and take on smart hands work where diagnostic judgement and configuration knowledge are needed. The request names the equipment, the task and the site.
Do you work in every datacenter in Turkey?
Reboot Monkey engineers work in any facility in Turkey where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Turkey?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with remote hands in Turkey?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Cities we cover in Turkey
Request Data Center Remote Hands in Turkey
Send the equipment, the task and the site. Prices are quoted on request and depend on the customer and the size of the job.