Skip to content

Yemen · Sanaa

Smart Hands in Sanaa

Smart Hands in Sanaa from Reboot Monkey means technical work that needs diagnostic judgement and configuration knowledge, delivered as on-site IT support in Sanaa data centers. Reboot Monkey engineers are dispatched to the customer's rack inside a facility that another company owns and runs.

Smart Hands

  • 8

    services detailed for Sanaa

  • 1

    agreement for every city

Request Smart Hands in Sanaa

Describe the task and the equipment concerned, and Reboot Monkey will quote the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Sanaa

Smart hands is the service to book when a task in a rack needs more than an instruction to press a button. The engineer has to read the symptoms, decide what is wrong and apply the right configuration, which is why the work needs diagnostic judgement and configuration knowledge. Reboot Monkey is a third-party datacenter services operator working inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

A request for Sanaa begins with a description of the fault or the change and the equipment it concerns. Reboot Monkey dispatches an engineer to the customer's rack to carry out the work, and a second, briefed Reboot Monkey engineer is named as backup for every customer site. The same request can combine diagnosis with a follow-up task, for example a component swap once the fault is found, and it can include cabling, which Reboot Monkey engineers install and patch in the customer's rack.

Datacenter Facilities in Sanaa

Data centres in Sanaa, ordered by the number of networks present:

  • YemenNet NOC DC1, TV Road, Sana'a

Our Smart Hands Services

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. A physical task carried out on the customer's instruction, such as a reboot, a cable check, a component swap or a visual check, is remote hands. When the engineer has to decide what is wrong or how a device should be set up, the job is smart hands. Both are carried out in the customer's own rack.

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request.

Work that goes beyond a single fault is handled as related services:

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. A buyer can therefore take the capacity and the engineer who works on it from one operator. The company is vendor-neutral: it works inside facilities that other companies own and run, and it is not tied to a hosting product of its own.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

For a CTO, IT Director or procurement manager in Sanaa, ordering follows a short path:

  • Describe the task, the equipment concerned and the rack it sits in.
  • Reboot Monkey quotes the job. Prices are quoted on request and depend on the customer and the size of the job.
  • A Reboot Monkey engineer is dispatched to the customer's rack, with a named backup engineer for the site.
  • Where the work needs a cross connect or carrier circuit, Reboot Monkey places the order with the facility operator and the carriers present.

How Reboot Monkey Works

These terms apply in every facility in Sanaa where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Sanaa?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out in the customer's rack by a Reboot Monkey engineer. Simple physical tasks such as reboots, cable checks, component swaps and visual checks are remote hands. Rack and stack, server migration, data center decommissioning and IT asset disposition are separate related services that can follow from the same request.

Do you provide on-site IT support in Sanaa data centers?

Yes. A request describes the fault or the change, and Reboot Monkey engineers are dispatched to the customer's rack in the data center to carry out the work. On-site tasks include diagnosis and configuration, installing hardware, and installing and patching cabling. Where a carrier circuit is needed, Reboot Monkey orders it from the facility operator and the carriers present.

Do you work in every datacenter in Sanaa?

Reboot Monkey engineers work in any facility in Sanaa where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Sanaa?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Sanaa?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Sanaa

Describe the task and the equipment concerned, and Reboot Monkey will quote the job.

Published:

Get a quote