Map: Natural Earth
ITAD
ITAD in Chile: IT Asset Disposition for Retired Hardware
ITAD in Chile is the end-of-life handling of a company's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff carry out the work in a partner's processing facility or on the customer's site.
9
of our services in Chile
In depth
ITAD: 9 sections, open any to read more.
ITAD in Chile: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. For a company in Chile, the work begins when servers, network equipment or storage are retired from a rack, a server room or a data centre and need a defined route out of the business.
Reboot Monkey delivers ITAD as a physical service. Its staff process the retired hardware in a partner's processing facility or on the customer's site, depending on how the job is set up. Each part of the definition is a separate piece of work: transport is a logistics step, wiping and destruction are data-handling steps, and resale or buyback is a commercial step. A request can cover the whole route or only part of it. The service is made up of these activities:
- Collection of the retired hardware at the customer's site or data centre, and transport for processing
- Data wiping of storage media
- Physical destruction of storage media on the customer's site by shredding or degaussing
- Resale or buyback of equipment that can be used again, quoted case by case
E-waste Rules in Chile
In Chile, electronic waste falls under the Law 20.920 of 2016. Retired servers, switches and storage arrays are equipment that leaves a rack at the end of its working life, and the route it takes out of the business is worth settling before anything is unplugged.
Reboot Monkey's part is the physical handling. It collects the retired hardware at the customer's site or data centre and transports it for processing. The storage media is then wiped or destroyed physically, and the equipment that can be used again goes to resale or buyback. The customer remains the party that decides which hardware is in scope, and the work is carried out on the customer's instruction.
Before collection, the equipment can be recorded by serial number, asset tag and rack position against the customer's asset list. The record means the list of what leaves each rack can be matched to the customer's own books, which is the document a finance or procurement team will want to reconcile once the project closes.
Equipment that can be used again is handled differently from equipment that cannot, so the request should separate the two groups wherever the customer already knows which is which. Where that is not yet known, the quote is prepared case by case from the asset list. Resale and buyback are never fixed in advance, because they depend on the equipment actually being collected.
Personal Data on Retired Drives in Chile
In Chile, personal data on retired drives falls under the Law 19.628/1999 On the protection of private life. A drive that has left service still holds whatever it held while in use, which makes the handling of the storage media the central question in any retirement project.
Reboot Monkey offers two ways to deal with the media. The first is data wiping. The second is physical destruction: on the customer's site, storage media can be destroyed physically by shredding or degaussing. Both are carried out by Reboot Monkey staff, and the customer instructs which hardware is in scope.
The choice between wiping and physical destruction is made when the job is scoped. Media that is destroyed cannot be resold afterwards, so a customer that intends to sell or hand back equipment should say so in the request, and a customer that wants every drive destroyed where it stands should say that instead. Both instructions are workable, and the quote reflects whichever the customer chooses.
In the request, list the storage media by the equipment that holds it and state, for each group, whether the customer wants wiping or physical destruction. A list built from the customer's asset list, with serial number and asset tag, lets Reboot Monkey staff work through the media against the same records that the customer's own team keeps. This keeps the instruction for each drive unambiguous before anyone arrives at the site.
How Collection and Destruction Work
Collection starts at the place where the hardware is. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. For equipment in a data centre, this includes the physical removal from the racks: data center decommissioning is the removal and disposal of retired hardware, and datacenter exit and relocation pairs the physical move of the customer's equipment to its new location with the removal and disposal of the hardware that is retired.
Inside a data centre the building belongs to someone else. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Where the hardware is processed depends on the job. Reboot Monkey staff carry out the work either in a partner's processing facility or on the customer's site. On the customer's site, storage media can be destroyed physically by shredding or degaussing. Data wiping and the resale or buyback of equipment that can be used again complete the service.
When equipment needs attention in the rack before it is removed, remote hands can be requested alongside collection. Remote hands are physical tasks carried out on the customer's instruction, such as cable checks and visual checks. When the customer wants the retired hardware bought back, ITAD with buyback is the matching service: IT asset disposition with the buyback of the retired hardware, quoted case by case.
IT Asset Disposition Process Flow
A request moves through the following steps, from first contact to finished work.
- First contact: the customer sends the list of hardware that is retiring, where it sits (the customer's site or a data centre), and whether storage media should be wiped or destroyed on site.
- Scoping and quote: Reboot Monkey scopes the job from that list. Quotes are on request and depend on the customer and the size of the job.
- Recording: where the customer wants it, equipment is recorded by serial number, asset tag and rack position against the customer's asset list.
- Collection and transport: Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing.
- Processing: Reboot Monkey staff wipe the data or destroy the storage media physically, in a partner's processing facility or on the customer's site by shredding or degaussing.
- Resale or buyback: equipment that can be used again is quoted case by case.
Why Reboot Monkey for ITAD in Chile
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own data centres. For ITAD, this means the work is done as a service around the customer's own equipment, wherever the customer has placed it.
Retirement work rarely stands alone. A hardware refresh brings new equipment in as old equipment goes out, and Reboot Monkey covers both directions. Hardware supply and spares provide data-centre hardware, servers, network equipment and spare parts. Rack and stack covers installing, mounting and cabling new hardware. ITAD then handles what is retired. The customer deals with Reboot Monkey for the whole route, from collection through wiping or destruction to resale or buyback.
For every customer site, a second, briefed Reboot Monkey engineer is named as backup. A collection or an on-site destruction job therefore has a named second person from the start.
Any retirement project involves a commercial decision as well as a technical one. Resale and buyback are quoted case by case, and the rest of the work is quoted on request according to the customer and the size of the job. A procurement manager can send the asset list and receive a scoped quote for the route the customer has chosen.
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Chile.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
IT Asset Disposition (ITAD) in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with retired hardware in more than one country can raise the same kind of request in each. For hardware held in Canada, see IT Asset Disposition (ITAD) in Canada.
What changes from one country to the next is the legal reference the customer works from, and the physical route the hardware takes. When a request spans several countries, it is easiest to scope when the asset list names the country for each line, together with the location of each item: a customer's site or a data centre. Reboot Monkey then quotes the job case by case.
A customer that is installing hardware at several sites at the same time has a related option. Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement. The retired hardware at those sites can then be raised as ITAD requests, so that new equipment going in and old equipment coming out are planned together.
The starting point for any country is the same: send the list of hardware, say where it sits, and state what should happen to the storage media and to the equipment that can be used again.
Frequently Asked Questions
What does IT asset disposition cover in Chile?
IT asset disposition in Chile covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Electronic waste falls under the Law 20.920 of 2016, and personal data on retired drives falls under the Law 19.628/1999 On the protection of private life.
Where does Reboot Monkey process retired hardware in Chile?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Chile?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Chile?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Plan the retirement of your hardware
Send the list of hardware to be retired and where it sits. Reboot Monkey scopes the job and quotes it on request.