Skip to content
Map of Chile: data centres as dots, the larger cities circled

Map: Natural Earth

Remote Hands

Remote Hands in Chile

Remote hands in Chile means physical tasks carried out on your instruction inside a data center: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to your facility to provide on-site IT support in Chile data centers for the servers and network equipment in your racks.

  • 9

    of our services in Chile

Choose your city

In depth

Remote Hands: 8 sections, open any to read more.

Remote Hands in Chile: How It Works

Remote hands puts an engineer in front of your equipment when your own staff are not at the data center. In the terms Reboot Monkey uses, it covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what has to happen and says so; the engineer carries it out at the rack. For a company that runs servers or network equipment in a data center in Chile, remote hands covers the work that needs a person on the floor rather than a session on a console.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so remote hands is delivered inside the facility the customer has chosen rather than in a building Reboot Monkey operates.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A remote hands task is therefore shaped by two things: what the customer instructs, and what the site rules allow an engineer to do on the floor. The customer's racks and the equipment in them are the scope of the work.

Remote hands has a boundary with smart hands. Smart hands is technical work that needs diagnostic judgement and configuration knowledge, while remote hands is the instructed physical task. A request that begins as a reboot can turn out to need diagnosis, so it helps to state in the first message what the engineer should do and what should be left alone. Where the work becomes installing new hardware, moving equipment or retiring it, the request belongs to one of the related services, and those are available alongside remote hands.

Prices are quoted on request and depend on the customer and the size of the job, so the request should describe the task and the equipment as completely as the customer can.

Datacenter Landscape in Chile

Data centres in Chile, ordered by the number of networks present:

  • Cirion Santiago de Chile - SAN1, Santa Marta de Huechuraba 6951, 8600360 Santiago: 70 networks; carriers Cirion, EdgeUno and Telxius
  • Ascenty SCL02 - Santiago (Ascenty DataCenters e Telecom), Guacolda 2100 - Comuna de Quilicura Region Metropolitana, 8710067 Santiago: 36 networks; carriers ANTEL Internacional, EdgeUno and Telxius
  • Ascenty SCL01 - Santiago (Ascenty DataCenters e Telecom), Guacolda 2100 - Comuna de Quilicura Region Metropolitana, 8710067 Santiago: 26 networks; carriers Cirion and EdgeUno
  • IFX Santiago (PIT CHILE SPA), El Bosque Sur 90, Las Condes, 0000 Santiago: 22 networks
  • Grupo ZGH - La Florida (Grupo ZGH SpA), Del Rocio 11233, 3820000 La Florida: 14 networks
  • EdgeUno Datacenter Santiago Chile (SCL1) (EdgeUno, Inc.), Av. Sta. Marta de Huechuraba 6951, 8301487: 11 networks; carriers EdgeUno
  • Equinix ST1/ST2 - Santiago (Equinix, Inc.), Avenida los Vientos, 20239, Ciudad de los Valles, 8340519 Santiago: 11 networks
  • GTD Chile - Moneda (GTD Internet), Moneda 920, 8320330 Santiago: 11 networks
  • PowerHost Santiago (PowerHost IXMETRO), Luis Beltran 1647 -Ñuñoa, 7770347 Santiago: 10 networks
  • entel - CNT (torre entel) (Entel Chile S.A.), Av. Libertador Bernardo O’Higgins 1409, 8340518 Santiago: 10 networks

Remote Hands by City

City pages for remote hands in Chile:

  • Santiago: https://www.rebootmonkey.com/en/chile/santiago/remote-hands/

Remote Hands in Chile: What We Deliver

The core of remote hands in Chile is the set of tasks in the service definition: reboots, cable checks, component swaps and visual checks, all carried out on the customer's instruction. A reboot restarts equipment the customer names. A cable check examines the cabling at the rack. A component swap exchanges one part for another. A visual check is an engineer looking at the equipment on the customer's behalf. A fibre inspection scope and cleaning kit are available on request for cable checks that involve fibre.

A request follows a short sequence. The customer states the task and the equipment it concerns. A Reboot Monkey engineer is dispatched to the customer's facility and carries the task out on that instruction. Because the work is physical and instructed, the customer keeps the decisions: which device is restarted, which cable is checked, which part is exchanged. For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request.

Rack and stack, server migration and structured cabling are installation and movement work: they bring hardware in, move it or connect it. Remote hands is the instructed task on hardware that is already in place. Hardware monitoring is done by the Reboot Monkey NOC rather than at the rack, so it works alongside remote hands without replacing it. Spares kept in the customer's rack on request sit at the point where component swaps take place.

Remote hands has neighbouring services, and a request can be matched to the right one by what the work involves:

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.

Why Reboot Monkey for Remote Hands in Chile

A second, briefed Reboot Monkey engineer is named as backup for every customer site. For an IT director comparing suppliers, the question to ask is whether the physical work at a site rests on one person or whether a second person has been briefed. A customer with several sites has a named backup at each of them.

Remote hands is one part of what a customer can buy from Reboot Monkey, and the network for the rack is another. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack.

IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs, so a customer with equipment in several data centres receives a quote for each. IPv4 addresses are leased alone or together with IP transit and rack space. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.

For a GPU or AI cluster, the GPU and AI deployment package covers racking, cabling and node swaps. Racking and cabling put the cluster's nodes into the racks and connect them, and a node swap replaces a node that has to be exchanged. Node swaps are the part of the package closest to remote hands.

For a customer who wants the whole environment delivered and run, IT infrastructure turnkey and run is the service: you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.

A remote hands request can lead to other work, and each next step has a matching service:

  • A reboot that does not restore a device may need diagnosis and configuration, which is smart hands.
  • A component swap that needs a part is supplied through hardware supply and spares.
  • Cabling that has to be installed, labelled or patched is structured cabling.
  • Equipment that has to change racks, rooms or facilities is server migration.
  • A device that is retired is handled by data center decommissioning.

How Reboot Monkey Works

These terms apply in every facility in Chile where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Remote Hands in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in Chile and in other countries can describe a task in the same terms in each place, because remote hands is defined by the task and not by the country.

A customer who also has equipment in Canada can arrange the same service for it through Remote Hands in Canada.

Whichever country the work is in, a remote hands request states three things. The first is where the work is: the facility and the rack position. The second is which device is meant: the serial number and asset tag, as they appear in the customer's asset list. The third is what is to be done: a reboot, a cable check, a component swap or a visual check. If the instruction concerns equipment that has not yet been recorded by serial number, asset tag and rack position, asset inventory is the service that records it.

Remote hands answers a single instruction; multi-site rollouts answer a larger need. A multi-site rollout is one installation programme carried out at several of the customer's sites by Reboot Monkey engineers.

When a site is closed or a deployment ends, the work changes from keeping equipment running to taking it out. Data center decommissioning is the removal and disposal of retired hardware. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. ITAD with buyback is IT asset disposition with the buyback of the retired hardware, quoted case by case. Which of the three applies depends on whether the equipment is moving to a new location, being removed and disposed of, or being sold back.

Read in order, these services follow the life of a deployment: rack space, network, IP transit and leased addresses put it in place; rack and stack and structured cabling build it; remote hands, smart hands and hardware monitoring support it while it runs; and exit, decommissioning and ITAD with buyback close it.

Frequently Asked Questions

What does remote hands cover in Chile?

Remote hands in Chile covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility to carry them out. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, moving or retiring hardware belongs to related services.

Do you provide on-site IT support in Chile data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility and work at the customer's racks on the customer's instruction. The work runs from instructed physical tasks (remote hands) to technical work that needs diagnostic judgement and configuration knowledge (smart hands), and it includes installing, mounting and cabling new hardware (rack and stack).

Do you work in every datacenter in Chile?

Reboot Monkey engineers work in any facility in Chile where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Chile?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Chile?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Chile

Describe the facility, the device and the task, and Reboot Monkey will quote the job.

Published:

Get a quote