Skip to content
Map of Chile: data centres as dots, the larger cities circled

Map: Natural Earth

Smart Hands

Smart Hands in Chile

Smart Hands in Chile covers technical work that needs diagnostic judgement and configuration knowledge, carried out inside the data center where your equipment sits. Reboot Monkey dispatches engineers to your facility to provide on-site IT support in Chile data centers, from fault diagnosis to configuration.

  • 9

    of our services in Chile

Choose your city

In depth

Smart Hands: 8 sections, open any to read more.

Smart Hands in Chile: How It Works

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. It differs from remote hands, which is physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. In Chile, Reboot Monkey provides smart hands to customers whose equipment sits in a data center that another company owns and runs. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner, so the work is carried out on the customer's own equipment in the facility the customer has chosen.

A request begins when the customer describes the fault or the change that is needed and says where the equipment sits. A Reboot Monkey engineer is dispatched to the customer's facility in Chile, works on the equipment in the customer's rack, and diagnoses the fault or carries out the configuration that the task calls for. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Continuity is part of the arrangement: a second, briefed Reboot Monkey engineer is named as backup for every customer site. For work on fibre links, a fibre inspection scope and cleaning kit are available on request.

What helps an engineer start with the right approach is a clear statement of the symptom or the target configuration, the equipment concerned and the rack it stands in. The same information shows whether the task is smart hands or remote hands before work begins. Remote hands and smart hands are ordered by the nature of the work, not by the equipment, so a task that turns out to need only physical action can be ordered as remote hands.

Smart hands can be requested for a single task or as part of a larger deployment, such as a new installation or a migration, and one request can name more than one piece of equipment in the same rack or room.

Datacenter Landscape in Chile

Data centres in Chile, ordered by the number of networks present:

  • Cirion Santiago de Chile - SAN1, Santa Marta de Huechuraba 6951, 8600360 Santiago: 70 networks; carriers Cirion, EdgeUno and Telxius
  • Ascenty SCL02 - Santiago (Ascenty DataCenters e Telecom), Guacolda 2100 - Comuna de Quilicura Region Metropolitana, 8710067 Santiago: 36 networks; carriers ANTEL Internacional, EdgeUno and Telxius
  • Ascenty SCL01 - Santiago (Ascenty DataCenters e Telecom), Guacolda 2100 - Comuna de Quilicura Region Metropolitana, 8710067 Santiago: 26 networks; carriers Cirion and EdgeUno
  • IFX Santiago (PIT CHILE SPA), El Bosque Sur 90, Las Condes, 0000 Santiago: 22 networks
  • Grupo ZGH - La Florida (Grupo ZGH SpA), Del Rocio 11233, 3820000 La Florida: 14 networks
  • EdgeUno Datacenter Santiago Chile (SCL1) (EdgeUno, Inc.), Av. Sta. Marta de Huechuraba 6951, 8301487: 11 networks; carriers EdgeUno
  • Equinix ST1/ST2 - Santiago (Equinix, Inc.), Avenida los Vientos, 20239, Ciudad de los Valles, 8340519 Santiago: 11 networks
  • GTD Chile - Moneda (GTD Internet), Moneda 920, 8320330 Santiago: 11 networks
  • PowerHost Santiago (PowerHost IXMETRO), Luis Beltran 1647 -Ñuñoa, 7770347 Santiago: 10 networks
  • entel - CNT (torre entel) (Entel Chile S.A.), Av. Libertador Bernardo O’Higgins 1409, 8340518 Santiago: 10 networks

Smart Hands by City

City pages for smart hands in Chile:

  • Santiago: https://www.rebootmonkey.com/en/chile/santiago/smart-hands/

Smart Hands in Chile: What We Deliver

Reboot Monkey engineers provide on-site IT support in Chile data centers as hands-on technical work in the customer's rack space. Smart hands covers the tasks where an engineer has to diagnose before acting and configure after acting. Around that core, Reboot Monkey engineers also carry out the installation, movement and documentation work that a deployment needs, and each of these services can be requested on its own or together with a smart hands task. The services around smart hands are defined by the work itself:

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • GPU and AI cluster deployment: racking, cabling and node swaps, also offered as a GPU and AI deployment package.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey for Smart Hands in Chile

Smart hands is one part of a wider offer. Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. The engineer who works on a customer's equipment therefore comes from the same supplier that can provide the transit, the addresses, the hardware and the rack space around it, and the customer keeps the choice of data center.

The network services follow the same model. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs there. IPv4 leasing covers leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement, so a new deployment can take its addresses, its transit and its rack space under that one agreement.

The terms of a smart hands engagement are set per customer. Prices are quoted on request and depend on the customer and the size of the job. A customer with recurring needs can agree remote hands as a retainer or as a block of hours instead of ordering task by task, with terms agreed per customer and quoted on request.

Where a job ends in documentation, as rack and network design does, the customer receives the documentation of the design together with a controlled handover.

At the end of a hardware life, data center decommissioning removes and disposes of retired hardware. IT asset disposition adds data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. ITAD with buyback is IT asset disposition with the buyback of the retired hardware, quoted case by case.

How Reboot Monkey Works

These terms apply in every facility in Chile where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Smart Hands in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in more than one country can raise smart hands requests for each of those places with the same supplier. A customer whose equipment is also in Canada can order the same work through Smart Hands in Canada.

Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement. For a customer deploying in Chile and in other countries, the programme is planned once, and each site is then worked by engineers dispatched to that facility.

Moving equipment between locations is a separate case. Server migration moves equipment between racks, rooms or facilities. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. Structured cabling and rack and stack are the services that cover the cabling and mounting work at the receiving site.

Links between sites are ordered separately. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.

Inside each facility, connectivity is handled the same way in every country. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Each request in each country is scoped in the same terms: the task, the equipment concerned and the site where it stands.

Frequently Asked Questions

Smart Hands vs. Remote Hands | What's the Difference?

Remote hands is physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The difference lies in the work: remote hands follows the instruction given, while smart hands asks the engineer to diagnose a fault or configure equipment. Remote hands can also be agreed as a retainer or as a block of hours.

What does smart hands cover in Chile?

In Chile, smart hands covers technical work on the customer's equipment that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer dispatched to the customer's facility. Related work such as rack and stack, server migration, structured cabling and GPU and AI cluster deployment can be requested alongside it. Each of these is defined by the task, so a request names the work and the equipment concerned.

Do you provide on-site IT support in Chile data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility in Chile and work on the customer's equipment in its rack, diagnosing faults and carrying out configuration, installation and cabling work. A request begins with the customer describing the fault or the change needed. For work on fibre links, a fibre inspection scope and cleaning kit are available on request.

Do you work in every datacenter in Chile?

Reboot Monkey engineers work in any facility in Chile where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Chile?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Chile?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Chile

Describe the task and the equipment concerned, and Reboot Monkey will quote the work on request.

Published:

Get a quote