Map: Natural Earth
Rack and Stack
Server Racking in Colombia
Server racking in Colombia is the installation, mounting and cabling of new hardware inside a data centre. Reboot Monkey engineers are dispatched to the customer's facility to cable and label the equipment and run power-on checks, and the quote is prepared on request.
9
of our services in Colombia
Choose your city
Services in Rack and Stack
In depth
Rack and Stack: 7 sections, open any to read more.
Server Racking in Colombia: How It Works
Rack and stack is the physical installation stage of a deployment: installing, mounting and cabling new hardware. For a business placing servers, storage or network equipment in Colombia, it is the work that takes equipment from delivery to a cabled rack in the data centre. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so server racking is carried out in the facility where the customer's equipment is housed.
Reboot Monkey engineers are dispatched to the customer's facility to carry out the installation. They work with hardware the customer has bought or with hardware that Reboot Monkey supplies, and the equipment is left cabled, labelled and checked at power-on. The customer decides which hardware goes into which racks, and the engineers carry out the physical work that follows. The size of that work is what the quote depends on.
A request for server racking in Colombia moves through the following steps.
- The customer sends the request: the equipment to be installed, the data centre in Colombia where it is going and the date the work is needed.
- Reboot Monkey prepares the quote. Prices are quoted on request and depend on the customer and the size of the job.
- A Reboot Monkey engineer is assigned to the site. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
- The engineer mounts the hardware in the rack, cables it and labels the cabling.
- The installation finishes with power-on checks.
Datacenter Landscape in Colombia
Data centres in Colombia, ordered by the number of networks present:
- Equinix BG1 - Bogota (Equinix, Inc.), Carrera 106 No. 15A-25, Zona Franca de Bogota, CP 110921: 82 networks; carriers Cirion, EdgeUno and Vtal Rede Neutra
- Equinix BG2 - Bogota (Equinix, Inc.), Carrera 106, 15A-25, Zona Franca de Bogota, 110921: 42 networks
- Tecto TBAQ1/2 (ex Globenet CLS) (Tecto Data Centers), Calle 6 #20-10 lote A2, Corregimiento de Salgar Puerto Colombia, 081001 Barranquilla: 31 networks; carriers Vtal Rede Neutra
- Odata DC BG01 (ODATA COLOMBIA SAS), Zona Franca Metropolitana, Predio san Rafael, vereda vuelta grande, Cota, Cundinamarca, 250017: 22 networks; carriers Cirion and EdgeUno
- EdgeUno Datacenter Bogota Colombia (BOG4) (EdgeUno, Inc.), 8a-49 Ac. 100, 110221 Bogota: 13 networks; carriers EdgeUno
- WAVE DC - Cali (prev. ETIX Cali #1) (KEYES), Calle 36 #128-321 vía Jamundí, Santiago de Cali, Valle del Cauca, Colombia, 00000: 13 networks
- Gtd Colombia - Medellin (Gtd Colombia S.A.S), Cra. 45 #14 -111, El Poblado, 050021 Medellin: 10 networks; carriers Cirion
- Telxius Barranquilla DC (Telxius Cable), El Pelú, Antigua Carretera Puerto Colombia, 000 Barranquilla: 9 networks
- IFX Datacenter WBP Bogota (IFX Networks Colombia SAS), Cra 69 #25B 44, Piso 8 Oficina 801, 110221 Bogota: 8 networks
- Internexa Medellin Colombia, Calle 12 Sur # 18-168, 574 Medellin: 8 networks
Rack and Stack by City
City pages for rack and stack in Colombia:
- Bogota: https://www.rebootmonkey.com/en/colombia/bogota/rack-and-stack/
Server Racking in Colombia: What We Deliver
Server racking is usually one part of a larger deployment. The services around it have defined scopes, so a request can name exactly what the job needs, from cabling and design to spares, records and multi-site programmes.
Cabling connects new hardware to the rest of the deployment. Structured cabling is the installing, labelling and patching of the cabling between the customer's racks and network equipment. Labelling matters beyond the day of installation, because a labelled cable can be traced from rack to patch, which is what makes later cable checks and component swaps practical. Cross-connects and carrier circuits are ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack. Where a job includes fibre connections, a fibre inspection scope and cleaning kit are available on request. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.
A new or expanding deployment can start with rack and network design: the rack layout and the network topology, ending with documentation of the design and a controlled handover. The rack layout decides where each device is mounted and the network topology decides how it is cabled, so designing first means the installation follows a documented plan. For a GPU or AI cluster, the work is racking, cabling and node swaps, and it is offered as GPU and AI cluster deployment or as a GPU and AI deployment package. Because node swaps sit inside that scope, replacing a node in the cluster does not need a new type of engagement.
Hardware supply and spares cover data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. When the hardware is supplied through Reboot Monkey, the equipment and the engineers who install it come from the same request. Asset inventory records the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. Because the record uses those identifiers, it can be compared line by line with the customer's own list, which makes it a natural follow-up to an installation.
A request can combine these services. An installation in Colombia can include a cross-connect order and a record of the installed equipment, and the same request can add a retainer for the remote hands work that follows. Where the equipment is for several sites, the request can say so, and the work is handled as a multi-site rollout: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, so the sequence of installations is set once rather than site by site. Each item is listed in the request so that the quote reflects the whole job.
Why Reboot Monkey for Server Racking in Colombia
The services Reboot Monkey offers around server racking follow the life of the hardware: it is installed, supported and, at the end, retired or moved.
A deployment needs more than an installer: it needs rack space, connectivity, addresses and hardware, and Reboot Monkey sells these alongside the installation work. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs, so capacity is set for each site rather than as a single figure. IPv4 leasing is the leasing of IPv4 addresses, alone or together with IP transit and rack space under one agreement, which puts addresses, transit and rack space into a single commercial arrangement.
For organisations that want infrastructure delivered and run for them, IT infrastructure turnkey and run is available. You or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The choice of data center stays with the customer, and the racking is part of the installation Reboot Monkey carries out.
Once the equipment is running, the support work splits by the kind of task. Remote hands is physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request. Hardware monitoring, the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, sits alongside the physical work of the engineers. Together, installation, hands-on support and monitoring cover the period from the first rack to day-to-day operation.
When hardware is retired, data center decommissioning is the removal and disposal of retired hardware. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. Server migration is moving equipment between racks, rooms or facilities, and it covers moves that do not involve retirement. These are physical jobs carried out by Reboot Monkey engineers, and they are requested in the same way as an installation: by naming the service, the data centre and the equipment.
For a customer planning installations in more than one country, the field footprint matters. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That figure describes the company, not any single country; a request for Colombia is scoped to the data centre and the equipment named in it.
How Reboot Monkey Works
These terms apply in every facility in Colombia where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Colombia?
Rack and stack covers installing, mounting and cabling new hardware. The work includes cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey engineers carry it out in the customer's facility in Colombia. Moving existing equipment, recording assets by serial number and rack position, and day-to-day hands-on tasks are separate services that a request can add.
Do you work in every datacenter in Colombia?
Reboot Monkey engineers work in any facility in Colombia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Colombia?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Colombia?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Colombia
Request a Quote for Server Racking in Colombia
Send the equipment list and the data centre where it is going, and Reboot Monkey will prepare the quote.