Map: Natural Earth
Remote Hands
Remote Hands in Colombia
Remote hands in Colombia means Reboot Monkey engineers carrying out physical tasks on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party datacenter services operator, not a hosting company, and does not own datacenters.
9
of our services in Colombia
Choose your city
Services in Remote Hands
In depth
Remote Hands: 7 sections, open any to read more.
Remote Hands in Colombia: How It Works
Remote hands is the service that puts an engineer in front of a customer's equipment when the customer's own staff are elsewhere. The work consists of physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. In Colombia, Reboot Monkey engineers are dispatched to the customer's facility to carry them out. The customer supplies the instruction, and the engineer supplies the physical presence at the rack.
Each task type has a plain meaning. A reboot is an engineer restarting a server or network device at the rack. A cable check is an engineer tracing a cable and confirming where it ends and what it is connected to. A component swap is an engineer replacing a part in a server or network device. A visual check is an engineer looking at the equipment and relaying what the rack shows, such as the state of the indicator lights on a device.
The instruction sets the boundary of the job. Remote hands covers what the customer can describe as a physical step. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, which is a separate service. A buyer can sort a task by asking whether the instruction can be written as a physical action, or whether the engineer must decide what is wrong and configure equipment to fix it. The first is remote hands and the second is smart hands. A job that starts as a reboot and turns out to need diagnosis moves from remote hands to smart hands. Keeping the two definitions apart means the scope of a remote hands request is the instruction itself, and nothing is assumed beyond it.
A request is easiest to act on when it names the facility, the rack and the device, states the task as an instruction, and says whether the work is a single visit or recurring. Those details are what the engineer works from on site. Prices are quoted on request and depend on the customer and the size of the job.
Remote hands suits the routine events that arise between planned projects: a device that has stopped responding and needs a restart, a replacement part that has arrived and needs fitting, a cable that should be checked after a change, or a rack that needs a visual check. In each case the customer decides what is to be done and the engineer carries it out at the rack. A component swap starts from the customer naming the faulty part: the engineer performs the swap, and finding the fault is diagnostic work. Installing new hardware or moving equipment between racks is planned work and belongs to separate services.
Datacenter Landscape in Colombia
Data centres in Colombia, ordered by the number of networks present:
- Equinix BG1 - Bogota (Equinix, Inc.), Carrera 106 No. 15A-25, Zona Franca de Bogota, CP 110921: 82 networks; carriers Cirion, EdgeUno and Vtal Rede Neutra
- Equinix BG2 - Bogota (Equinix, Inc.), Carrera 106, 15A-25, Zona Franca de Bogota, 110921: 42 networks
- Tecto TBAQ1/2 (ex Globenet CLS) (Tecto Data Centers), Calle 6 #20-10 lote A2, Corregimiento de Salgar Puerto Colombia, 081001 Barranquilla: 31 networks; carriers Vtal Rede Neutra
- Odata DC BG01 (ODATA COLOMBIA SAS), Zona Franca Metropolitana, Predio san Rafael, vereda vuelta grande, Cota, Cundinamarca, 250017: 22 networks; carriers Cirion and EdgeUno
- EdgeUno Datacenter Bogota Colombia (BOG4) (EdgeUno, Inc.), 8a-49 Ac. 100, 110221 Bogota: 13 networks; carriers EdgeUno
- WAVE DC - Cali (prev. ETIX Cali #1) (KEYES), Calle 36 #128-321 vía Jamundí, Santiago de Cali, Valle del Cauca, Colombia, 00000: 13 networks
- Gtd Colombia - Medellin (Gtd Colombia S.A.S), Cra. 45 #14 -111, El Poblado, 050021 Medellin: 10 networks; carriers Cirion
- Telxius Barranquilla DC (Telxius Cable), El Pelú, Antigua Carretera Puerto Colombia, 000 Barranquilla: 9 networks
- IFX Datacenter WBP Bogota (IFX Networks Colombia SAS), Cra 69 #25B 44, Piso 8 Oficina 801, 110221 Bogota: 8 networks
- Internexa Medellin Colombia, Calle 12 Sur # 18-168, 574 Medellin: 8 networks
Remote Hands by City
City pages for remote hands in Colombia:
- Bogota: https://www.rebootmonkey.com/en/colombia/bogota/remote-hands/
Remote Hands in Colombia: What We Deliver
Reboot Monkey provides on-site IT support in Colombia data centers through engineers dispatched to the customer's facility. Remote hands is one of several services that cover the physical work a deployment needs over its life, and each of them has its own scope. Remote hands remains the right service when the instruction is a physical step on equipment that is already installed.
- Rack and stack: installing, mounting and cabling new hardware. It is the service for equipment that is arriving new, as opposed to equipment already in place.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment. It is planned cabling work, where a cable check under remote hands inspects cabling that already exists.
- Cross-connects and carrier circuits: ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
- Server migration: moving equipment between racks, rooms or facilities. The equipment moved is the customer's, and the move can stay within one facility or go between facilities.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It is a monitoring service, separate from the physical tasks of remote hands.
- Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
- GPU and AI cluster deployment: racking, cabling and node swaps, also offered as a GPU and AI deployment package.
- Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
Why Reboot Monkey for Remote Hands in Colombia
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it does not own datacenters. Remote hands is therefore bought from the same operator that supplies the hardware, rack space and network around the equipment being touched.
The decision for a CTO or IT director is which physical tasks stay with the customer's own staff and which are handed to Reboot Monkey engineers. Tasks that can be written as one physical instruction are what remote hands is defined for. Tasks that need judgement belong to smart hands, and planned projects belong to their own services.
Reboot Monkey sells the network for the rack, and network services sit alongside the physical work. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 leasing covers leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a customer whose equipment is spread across several sites, multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement.
A buyer comparing providers can ask who attends the site and who covers when that engineer is unavailable. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request. A buyer who expects to call on remote hands repeatedly can describe that pattern in the quote request, since the terms are agreed per customer.
Where a job involves fibre connections, a fibre inspection scope and cleaning kit are available on request, and they can be asked for together with the job. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Because Reboot Monkey is a third-party operator and not a hosting company, it works in the data center the customer is already in or chooses. For remote hands, the engineer is dispatched to the facility that holds the customer's equipment.
Some customers want the infrastructure handled rather than a single service. With IT infrastructure turnkey and run, you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The data center itself stays with its operator.
How Reboot Monkey Works
These terms apply in every facility in Colombia where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Colombia?
Remote hands in Colombia covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility to carry them out. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, which is a separate service with its own scope.
Do you provide on-site IT support in Colombia data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Colombia and work at the customer's rack. On-site IT support there covers physical tasks on the customer's instruction, installing, mounting and cabling new hardware, moving equipment between racks, rooms or facilities, and, as smart hands, technical work that needs diagnostic judgement.
Do you work in every datacenter in Colombia?
Reboot Monkey engineers work in any facility in Colombia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Colombia?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with remote hands in Colombia?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Cities we cover in Colombia
Request Remote Hands in Colombia
Describe the task, the facility and whether the work is recurring, and Reboot Monkey will quote on request.