Skip to content
Map of Colombia: data centres as dots, the larger cities circled

Map: Natural Earth

Smart Hands

Smart Hands in Colombia

Smart hands is technical work in a data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to the customer's facility in Colombia to diagnose faults, configure equipment and carry out related installation, cabling and migration work, quoted on request for each job.

  • 9

    of our services in Colombia

Choose your city

In depth

Smart Hands: 7 sections, open any to read more.

Smart Hands in Colombia: How It Works

Smart hands is technical work on equipment inside a data center that needs diagnostic judgement and configuration knowledge. It differs from a task where the customer already knows the exact action required. The engineer is asked to establish what is wrong, decide what to change and configure the result. The work is open-ended in the sense that the starting point is a symptom or an objective, not a list of steps. In Colombia, Reboot Monkey engineers are dispatched to the customer's facility to carry out this work on the hardware in the rack.

A request starts with the customer's description of the task: the equipment involved, the symptom or the change wanted, and the facility where the equipment stands. A request is easiest to scope when it names the facility, the equipment and the outcome the customer expects. Reboot Monkey then quotes the job. Prices are quoted on request and depend on the customer and the size of the job. Once the job is agreed, an engineer is dispatched to the facility and carries out the work on the equipment.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Smart hands work therefore concerns the customer's own equipment and the cabling and configuration around it.

Because the starting point is a symptom or an objective, the engineer's first task on site is diagnosis. The change that follows is configured on the equipment itself, and the customer's instruction decides how far that change goes. A job that begins as a diagnosis can end as a different kind of work, and the engagement follows the work rather than the label on the request. A fault traced to a failed component becomes a component swap, which falls under remote hands. A fault traced to a configuration error stays smart hands work. A fault that calls for new hardware becomes rack and stack, and one that calls for equipment to be moved becomes server migration. The customer states the problem, and the engineer establishes on site which kind of work it is.

Identifiers make a request precise. When Reboot Monkey records a customer's equipment, it uses the serial number, asset tag and rack position, so those same identifiers are the clearest way to point an engineer to a specific device in a request.

Some customers need this work once, others repeatedly. A one-off fault is quoted as a job when it arises. For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request.

Datacenter Landscape in Colombia

Data centres in Colombia, ordered by the number of networks present:

  • Equinix BG1 - Bogota (Equinix, Inc.), Carrera 106 No. 15A-25, Zona Franca de Bogota, CP 110921: 82 networks; carriers Cirion, EdgeUno and Vtal Rede Neutra
  • Equinix BG2 - Bogota (Equinix, Inc.), Carrera 106, 15A-25, Zona Franca de Bogota, 110921: 42 networks
  • Tecto TBAQ1/2 (ex Globenet CLS) (Tecto Data Centers), Calle 6 #20-10 lote A2, Corregimiento de Salgar Puerto Colombia, 081001 Barranquilla: 31 networks; carriers Vtal Rede Neutra
  • Odata DC BG01 (ODATA COLOMBIA SAS), Zona Franca Metropolitana, Predio san Rafael, vereda vuelta grande, Cota, Cundinamarca, 250017: 22 networks; carriers Cirion and EdgeUno
  • EdgeUno Datacenter Bogota Colombia (BOG4) (EdgeUno, Inc.), 8a-49 Ac. 100, 110221 Bogota: 13 networks; carriers EdgeUno
  • WAVE DC - Cali (prev. ETIX Cali #1) (KEYES), Calle 36 #128-321 vía Jamundí, Santiago de Cali, Valle del Cauca, Colombia, 00000: 13 networks
  • Gtd Colombia - Medellin (Gtd Colombia S.A.S), Cra. 45 #14 -111, El Poblado, 050021 Medellin: 10 networks; carriers Cirion
  • Telxius Barranquilla DC (Telxius Cable), El Pelú, Antigua Carretera Puerto Colombia, 000 Barranquilla: 9 networks
  • IFX Datacenter WBP Bogota (IFX Networks Colombia SAS), Cra 69 #25B 44, Piso 8 Oficina 801, 110221 Bogota: 8 networks
  • Internexa Medellin Colombia, Calle 12 Sur # 18-168, 574 Medellin: 8 networks

Smart Hands by City

City pages for smart hands in Colombia:

  • Bogota: https://www.rebootmonkey.com/en/colombia/bogota/smart-hands/

Smart Hands in Colombia: What We Deliver

Smart hands in Colombia is delivered by Reboot Monkey engineers working inside the customer's facility, on the customer's equipment. The work is organised by service, and each service has a defined scope, so a buyer can match a task to the right one before requesting a quote. Customers who need on-site IT support in Colombia data centers can request any of the services below.

Cabling is where several of these services meet in the rack. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a link does not come up after patching, finding the cause is smart hands work on the same equipment. A fibre inspection scope and cleaning kit are available on request.

The services that sit around smart hands are defined as follows:

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
  • GPU and AI cluster deployment: racking, cabling and node swaps. When a node in a deployed cluster fails, replacing it is a node swap, and working out why it failed is the diagnostic part of the job.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.

Why Reboot Monkey for Smart Hands in Colombia

Reboot Monkey is a third-party datacenter services operator. It is not a hosting company and it does not own datacenters. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. Smart hands is one of those services.

The people who do the work are Reboot Monkey field engineers. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

Larger changes are handled as projects rather than as single tasks. A new or expanding deployment starts with rack and network design: the rack layout and the network topology, ending with documentation of the design and a controlled handover. A change that spans several sites can be organised as a multi-site rollout, which is one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. A move between buildings is datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. When equipment simply reaches the end of its life, data center decommissioning covers removing and disposing of retired hardware. These projects are quoted on request, like any other job.

Customers can also buy the layers around the equipment from the same supplier:

  • IP transit: offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs.
  • IPv4 leasing: leasing IPv4 addresses, alone or together with IP transit and rack space.
  • Dark fibre and wavelengths: dark fibre between data centres and wavelength circuits, ordered from the carriers and quoted on request.
  • IT infrastructure turnkey and run: you or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.

How Reboot Monkey Works

These terms apply in every facility in Colombia where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

Smart Hands vs. Remote Hands | What's the Difference?

Remote hands is physical work carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The practical test is whether the engineer follows a precise instruction or has to find the cause and configure the result. Reboot Monkey provides both services.

What does smart hands cover in Colombia?

In Colombia, smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers dispatched to the customer's facility. Related services such as rack and stack, server migration, structured cabling, asset inventory and GPU and AI cluster deployment are available for installation and movement work. The scope of a job is set when the request is quoted.

Do you provide on-site IT support in Colombia data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility and work on the customer's equipment in the rack. A request starts with the customer describing the task, the equipment and the facility. Once the job is quoted and agreed, an engineer is dispatched. The work includes diagnosis and configuration, installing and patching cabling in the customer's rack, and installing and mounting new hardware.

Do you work in every datacenter in Colombia?

Reboot Monkey engineers work in any facility in Colombia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Colombia?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Colombia?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Describe the job

Send the facility, the equipment and the outcome you need. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote