Skip to content
Map of South Africa: data centres as dots, the cities with a Reboot Monkey page highlighted: Johannesburg

Map: Natural Earth

Smart Hands

Data Center Smart Hands in South Africa

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers carry it out in the customer's rack, giving South Africa deployments on-site IT support in South Africa data centers without a permanent local team.

  • 8

    of our services in South Africa

Choose your city

  • Table Mountain and Devil's Peak rising behind the houses and offices of Cape Town's City Bowl under a clear blue sky.

    Photo: Josep M. Gracia · CC BY-SA 4.0 · cropped · source

    Cape Town

    • Smart Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    Smart Hands Cape Town
  • The Nelson Mandela Bridge spanning the rail yards towards Johannesburg's CBD towers, seen from Braamfontein under a summer sky with clouds.

    Photo: Evan Bench · CC BY 2.0 · cropped · source

    Johannesburg

    • Smart Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    Smart Hands Johannesburg

In depth

Smart Hands: 10 sections, open any to read more.

Data Center Smart Hands in South Africa: How It Works

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. In South Africa, Reboot Monkey dispatches its field engineers to the customer's facility to do that work in the customer's own racks. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own the buildings where the work takes place.

The dividing line between the two hands services is the judgement a task calls for. Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Smart hands starts where the engineer has to interpret what the equipment is doing and apply configuration knowledge to it, so the instruction describes a problem or an outcome rather than a single physical action. Buyers who know which side of that line a task sits on can brief the work accurately and avoid a second visit for the same fault.

A request begins with the customer describing the task and the equipment it concerns. Reboot Monkey scopes the work against that description, assigns an engineer and sends that engineer to the facility where the equipment stands. The engineer carries out the work in the customer's rack and reports back to the customer when it is done. If a task turns out to be a physical action only, it is handled as remote hands. If it needs diagnosis and configuration, it is handled as smart hands.

Datacenter Landscape in South Africa

Data centres in South Africa, ordered by the number of networks present:

  • Teraco Johannesburg Campus, South Africa (Teraco Data Environments Pty Ltd), 5 Brewery Street, Isando, Johannesburg: 392 networks; carriers DFA South Africa, Orange Wholesale International - EVPL and i3D.net
  • Teraco CT1 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Great Westerford Building, 240 Main Road, Cape Town: 199 networks; carriers DFA South Africa, Orange Wholesale International - EVPL and TransmissionCo
  • Teraco DB1 Durban, South Africa (Teraco Data Environments Pty Ltd), Riverhorse Valley, Riverhorse Cl, Newlands East, Durban: 119 networks; carriers DFA South Africa
  • xneelo JNB1 (Formerly Hetzner SA) (xneelo (Formerly Hetzner SA)), 21 Landmarks Avenue, Samrand, Centurion: 34 networks; carriers DFA South Africa
  • Africa Data Centres, Johannesburg JHB1, South Africa, 401 Old Pretoria Main Road, Halfway House, Midrand: 26 networks
  • Teraco CT2 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Brackengate 2, 57 Tiber Rd, Brackenfell, Cape Town: 25 networks; carriers DFA South Africa and TransmissionCo
  • Teraco Johannesburg Bredell Campus (Teraco Data Environments Pty Ltd), 1 Riverfields Boulevard, Bredell, Johannesburg 1600: 22 networks; carriers DFA South Africa
  • OADC - Parklands (Open Access Data Centres), 7 - 9 Keyes Drive, Rosebank, Johannesburg: 21 networks; carriers DFA South Africa
  • Africa Data Centres, Cape Town CPT1, South Africa, 108 De Waal Road, Elfindale, Diep River, Cape Town: 20 networks
  • Africa Data Centres, Johannesburg JHB2, South Africa, 17 Waterloo Road, Samrand Business Park: 16 networks

Smart Hands by City

City pages for smart hands in South Africa:

  • Cape Town: https://www.rebootmonkey.com/en/south-africa/cape-town/smart-hands/
  • Johannesburg: https://www.rebootmonkey.com/en/south-africa/johannesburg/smart-hands/

Data Center Smart Hands in South Africa: What We Deliver

Smart hands is one of seven services Reboot Monkey delivers inside customer facilities. The others are defined as follows, so a buyer can see where a smart hands request ends and where a neighbouring service takes over.

  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge, for faults where the cause is not yet known or where equipment must be configured as well as touched.
  • Rack and stack: installing, mounting and cabling new hardware in the customer's racks.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Rapid Response in South Africa

A fault in a rack rarely waits for a convenient moment, and the first question a CTO or IT director asks is who will actually be at the equipment. Reboot Monkey answers that at the start of an engagement, not at the moment of the fault. A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup is briefed in advance, so if the first engineer cannot attend, the person who takes the request already knows the site and the equipment it holds.

Response commitments are part of the service terms the customer receives with the engagement. This section deals with how the request moves once it is raised. The customer states the symptom, the equipment affected and what outcome is needed. Reboot Monkey assigns the engineer, and the engineer goes to the facility and works on the equipment directly. Because smart hands work involves diagnosis, the engineer's task is not limited to a single instructed action. The engineer can follow the fault through the equipment, adjust the configuration where the task requires it, and report what was found.

Customers who also take hardware monitoring have the Reboot Monkey NOC watching their servers and network equipment. That gives the on-site engineer and the NOC one operator to coordinate with, and it gives the customer a single party to ask when a fault involves both what the monitoring shows and what the rack looks like.

Stronger Security in South Africa

Security in a shared data center is set by who may touch which equipment and under whose rules. That arrangement applies to every visit. Within those rules, the customer controls the scope of the work. A smart hands engineer acts on the customer's instruction and on the equipment the customer has named. The engineer does not widen the task into other racks or other equipment. When diagnosis shows that more work is needed than was requested, the customer decides whether to extend the task. That keeps changes to configuration tied to a decision made by the customer. Retired hardware is a separate exposure. Equipment that leaves a rack still holds data, so the services for removal and disposal define how data is handled. IT asset disposition covers data wiping, on-site shredding or degaussing, and collection and transport. These are processed by Reboot Monkey staff, either on the customer's site or in a partner's processing facility. Resale or buyback is quoted case by case. A customer who needs drives destroyed before they leave the building can ask for shredding or degaussing on site. The backup engineer named for every customer site also bears on security, because the number of people who know the site and its equipment is limited and agreed in advance.

Why Reboot Monkey for Data Center Smart Hands in South Africa

A smart hands engineer is most useful when the same operator also understands the network that the rack depends on. Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a link fails, the party that ordered the circuit and the party that patched the cable are the same, so the diagnosis is not split between suppliers who each point at the other.

Fibre faults are a common reason for a smart hands visit. A fibre inspection scope and cleaning kit are available on request, so the engineer can inspect and clean connectors on site as part of the diagnosis when the task calls for it.

Reboot Monkey does not own the data centers where it works and does not run them. It sells services inside buildings that other companies own, which means its engineers are there to serve the customer's equipment and not to promote a facility. For a procurement manager, that separation keeps the smart hands service independent of the choice of building.

Commercial terms follow the job. Prices are quoted on request and depend on the customer and the size of the job. A buyer who sends the equipment list, the task and the site receives a quote shaped to that work, and a CTO or IT director can then compare it with the in-house alternative.

How Reboot Monkey Works

These terms apply in every facility in South Africa where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Smart Hands in Other Countries

Many customers run equipment in more than one country, and a South Africa deployment is often one part of a wider estate. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A request for another country follows the same shape as one for South Africa: the customer names the country, the facility where the equipment stands, the equipment and the task. Teams with equipment in Spain can request the same smart hands service through Smart Hands in Spain, and teams with equipment in South Korea can do so through Smart Hands in South Korea. For a buyer, the practical value of one operator across countries is a consistent way to brief work. The distinction between remote hands and smart hands is the same everywhere. The definitions of rack and stack, server migration, decommissioning, IT asset disposition and hardware monitoring are the same everywhere. A task written once for one site can be adapted for another, and the buyer can decide for each location which of those services it needs.

Frequently Asked Questions

What Services Do Smart Hands Provide?

Smart hands provides technical work that needs diagnostic judgement and configuration knowledge, carried out by an engineer at the customer's equipment. It sits above remote hands, which covers physical tasks such as reboots, cable checks, component swaps and visual checks. Reboot Monkey also delivers rack and stack, server migration, decommissioning, IT asset disposition and hardware monitoring as separate services.

What does smart hands cover in South Africa?

In South Africa, smart hands covers technical work in the customer's racks that needs diagnosis and configuration, such as finding the cause of a fault and applying the settings that correct it. Reboot Monkey dispatches its field engineers to the customer's facility. Physical-only tasks are handled as remote hands, and installation, migration, decommissioning and disposal are separate services.

Do you provide on-site IT support in South Africa data centers?

Yes. Reboot Monkey dispatches field engineers to the customer's facility in South Africa, where they work on the customer's equipment in its rack. The customer describes the task and the equipment, Reboot Monkey assigns an engineer, and a second, briefed engineer is named as backup for every customer site. The facility operator's site rules apply to each visit.

Do you work in every datacenter in South Africa?

Reboot Monkey engineers work in any facility in South Africa where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in South Africa?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in South Africa?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands for Your South Africa Site

Send the task, the equipment and the facility. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote