Skip to content
Map of South Africa: data centres as dots, the cities with a Reboot Monkey page highlighted: Johannesburg

Map: Natural Earth

Rack and Stack

Server Racking in South Africa

Server racking in South Africa is the installation, mounting and cabling of new hardware in the customer's rack. Reboot Monkey engineers are dispatched to the customer's facility to cable and label the equipment and run power-on checks. Quotes are on request.

  • 8

    of our services in South Africa

Choose your city

In depth

Rack and Stack: 8 sections, open any to read more.

Server Racking in South Africa: How It Works

Server racking in South Africa is the installation, mounting and cabling of new hardware. Reboot Monkey delivers it as a field service for companies that have bought servers, switches or storage and need them installed in a rack. Reboot Monkey also sells data-centre hardware and rack space, so the installation can follow a purchase made from Reboot Monkey or concern hardware the customer already owns. The service is for new equipment. Equipment that already runs somewhere is a different job, and the request is routed to the service that matches it.

A request moves through a short sequence. The customer states what is to be installed and in which facility. Reboot Monkey confirms that the job is rack and stack and sends a quote. Quotes are on request and depend on the customer and the size of the job, so each quote is written against the hardware named in the request. After the quote is accepted, Reboot Monkey engineers are dispatched to the customer's facility, where they mount the hardware, cable it, label it and run the power-on checks.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The installation and the cabling in the customer's rack are the part of the job that Reboot Monkey engineers carry out.

The information that shapes a quote is the hardware to be installed and the size of the job. A request that states both at the start needs fewer exchanges before the work is arranged.

On completion the hardware is mounted, cabled and labelled, and it has passed its power-on check. That is the state in which the customer's own team can begin configuration. Work that needs diagnostic judgement and configuration knowledge is smart hands work and is requested separately.

The same sequence applies whatever the size of the job. A single server and a multi-rack installation are handled as requests of the same kind. What changes is the quote and the amount of work on site, not the way the request is handled from first contact to finished work.

Datacenter Landscape in South Africa

Data centres in South Africa, ordered by the number of networks present:

  • Teraco Johannesburg Campus, South Africa (Teraco Data Environments Pty Ltd), 5 Brewery Street, Isando, Johannesburg: 392 networks; carriers DFA South Africa, Orange Wholesale International - EVPL and i3D.net
  • Teraco CT1 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Great Westerford Building, 240 Main Road, Cape Town: 199 networks; carriers DFA South Africa, Orange Wholesale International - EVPL and TransmissionCo
  • Teraco DB1 Durban, South Africa (Teraco Data Environments Pty Ltd), Riverhorse Valley, Riverhorse Cl, Newlands East, Durban: 119 networks; carriers DFA South Africa
  • xneelo JNB1 (Formerly Hetzner SA) (xneelo (Formerly Hetzner SA)), 21 Landmarks Avenue, Samrand, Centurion: 34 networks; carriers DFA South Africa
  • Africa Data Centres, Johannesburg JHB1, South Africa, 401 Old Pretoria Main Road, Halfway House, Midrand: 26 networks
  • Teraco CT2 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Brackengate 2, 57 Tiber Rd, Brackenfell, Cape Town: 25 networks; carriers DFA South Africa and TransmissionCo
  • Teraco Johannesburg Bredell Campus (Teraco Data Environments Pty Ltd), 1 Riverfields Boulevard, Bredell, Johannesburg 1600: 22 networks; carriers DFA South Africa
  • OADC - Parklands (Open Access Data Centres), 7 - 9 Keyes Drive, Rosebank, Johannesburg: 21 networks; carriers DFA South Africa
  • Africa Data Centres, Cape Town CPT1, South Africa, 108 De Waal Road, Elfindale, Diep River, Cape Town: 20 networks
  • Africa Data Centres, Johannesburg JHB2, South Africa, 17 Waterloo Road, Samrand Business Park: 16 networks

Rack and Stack by City

City pages for rack and stack in South Africa:

  • Cape Town: https://www.rebootmonkey.com/en/south-africa/cape-town/rack-and-stack/
  • Johannesburg: https://www.rebootmonkey.com/en/south-africa/johannesburg/rack-and-stack/

Server Racking in South Africa: What We Deliver

Rack and stack work covers cabling, labelling and power-on checks; quotes are on request. A job is made up of the following parts.

Connectivity is the part of the job that reaches outside the rack. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A customer who needs a connection for newly installed hardware can therefore raise it together with the installation.

The power-on check comes after the cabling. It means the result of the installation is observed on site by the engineer who attended, rather than assumed from the fact that the hardware is mounted. Labelling is done on the installed equipment and its cabling during the same visit, so the rack is left in a state that the customer's team and any later support engineer can read.

Rack and stack is the service for new hardware. Server migration is moving equipment between racks, rooms or facilities, and data center decommissioning is removing and disposing of retired hardware. A request that mixes new and existing equipment is easiest to scope when each part is named as the service it belongs to, so that each part is quoted against the right work. A rollout that replaces old servers with new ones, for example, is an installation of the new servers and a decommissioning of the old ones, and the request describes them as two pieces of work.

  • Installing and mounting the new hardware in the customer's rack.
  • Cabling the hardware, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
  • Labelling the installed equipment and its cabling.
  • Running power-on checks once the hardware is installed and cabled.
  • A fibre inspection scope and cleaning kit, available on request.

Why Reboot Monkey for Server Racking in South Africa

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. It is not a hosting company and not a datacenter owner. For a buyer planning server racking in South Africa, this means the installation is one of several things that can come from the same supplier: the hardware, the rack space, the connectivity and the engineers who put them together.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. For a rack and stack job, a second person who has been briefed on the site is therefore available for the work.

A request is complete enough to quote when it states the following.

Installation is usually the first physical step in the life of a deployment, and the services that follow it are defined by the type of work involved. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. A customer who installs hardware through rack and stack can request any of these later for the same equipment, each as its own service with its own quote.

  • The hardware to be installed and how much of it there is.
  • The facility and the rack where it is to go.
  • Whether cross connects or carrier circuits are needed.
  • Whether the job also involves moving or removing existing equipment.
  • Whether the work is a single installation or a series of installations.

How Reboot Monkey Works

These terms apply in every facility in South Africa where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A company whose deployment extends beyond South Africa can raise the same kind of request for each location, with every request naming its own facility and its own hardware.

A rollout that continues in South Korea follows the same sequence of request, quote, dispatch and installation, and the service for that country is set out in Rack and Stack in South Korea.

For a deployment that also reaches Spain, the request is raised in the same way through Rack and Stack in Spain.

Treating each location as its own request has practical consequences for a multi-country programme. Quotes depend on the customer and the size of the job, so a larger installation in one country and a smaller one in another are quoted against their own work. Connectivity is also tied to the facility: the cross connects and carrier circuits are ordered from the operator and the carriers present in that particular building, so a circuit request names the facility it is for.

The service definitions stay the same from one country to the next. New hardware is rack and stack, moving equipment is server migration, and removing retired hardware is data center decommissioning. A programme that installs in one country while retiring equipment in another is raised as separate pieces of work, each matched to the service that describes it.

Frequently Asked Questions

What does rack and stack cover in South Africa?

Rack and stack is the installation, mounting and cabling of new hardware. In South Africa the work covers cabling, labelling and power-on checks, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Moving existing equipment, removing retired hardware and diagnostic work belong to other services. Quotes are on request.

Do you work in every datacenter in South Africa?

Reboot Monkey engineers work in any facility in South Africa where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in South Africa?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with rack and stack in South Africa?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a Server Racking Quote for South Africa

Send the hardware list and the facility. Quotes are on request and depend on the customer and the size of the job.

Published:

Get a quote