Skip to content

South Sudan · Juba

Rack and Stack in Juba

Rack and stack in Juba is the installation, mounting and cabling of new hardware inside a data centre that another company owns and runs. Reboot Monkey engineers are dispatched to the customer's facility to mount the equipment, cable it, label it and run power-on checks. Quotes are on request.

Rack and Stack

  • 8

    services detailed for Juba

  • 1

    agreement for every city

Request a rack and stack quote for Juba

Send the hardware list, the target rack and the network the rack needs, and Reboot Monkey will quote the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Juba

Rack and stack is the installation, mounting and cabling of new hardware. In Juba, Reboot Monkey carries it out inside a data centre that another company owns and runs. Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and not a datacenter owner.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Rack and stack work covers cabling, labelling and power-on checks. New hardware is mounted in the customer's rack, cabled, labelled and powered on. Work that needs diagnostic judgement or configuration knowledge is a different service, smart hands, and is scoped separately.

For a CTO, IT director or procurement manager, the decision rests on scope: which hardware is installed, which cables are run and which network circuits the rack needs. Prices are quoted on request and depend on the customer and the size of the job. Stating those three points at first contact lets the quote reflect the actual work rather than an assumption.

Datacenter Facilities in Juba

Data centres in Juba, ordered by the number of networks present:

  • Trinity Technologies DC Juba (Trinity Technologies Ltd), Block A111 Plot No 5, Hai Malakal, 00211 Juba

Our Rack and Stack Services

A rack and stack job in Juba is made up of the following parts, each carried out by Reboot Monkey engineers in the customer's rack.

The network part of a job is stated in the same request as the hardware, because circuits are ordered through the facility operator and the carriers present in the facility rather than by the customer directly.

Related work follows from the same installation. Server migration is moving equipment between racks, rooms or facilities. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Hardware monitoring is monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. When hardware is retired, data center decommissioning covers removing and disposing of it.

  • Installing and mounting new hardware in the customer's rack.
  • Cabling and labelling the installed hardware.
  • Power-on checks once the hardware is installed and cabled.
  • Network for the rack: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
  • A fibre inspection scope and cleaning kit are available on request.

Why Reboot Monkey

Reboot Monkey is a vendor-neutral third-party datacenter services operator, and its engineers are dispatched to the customer's facility to do the work. A second, briefed Reboot Monkey engineer is named as backup for every customer site.

A request runs in a short sequence. The customer describes the hardware and the rack it goes into. Reboot Monkey scopes the job against cabling, labelling and power-on checks, issues the quote, and dispatches an engineer to the customer's facility with the backup engineer named.

Rack space, IP transit, leased IP addresses and network are sold by Reboot Monkey alongside the installation, so the hardware, its cabling and its connectivity are arranged with one provider.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

At the end of the hardware's life, IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.

How Reboot Monkey Works

These terms apply in every facility in Juba where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Juba?

Rack and stack in Juba covers installing, mounting and cabling new hardware in the customer's rack, together with labelling and power-on checks. Where the rack needs network, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present, and its engineers install and patch the cabling. Quotes are on request.

Do you work in every datacenter in Juba?

Reboot Monkey engineers work in any facility in Juba where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Juba?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Juba?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a rack and stack quote for Juba

Send the hardware list, the target rack and the network the rack needs, and Reboot Monkey will quote the job.

Published:

Get a quote